Enclosures / Chassis

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-12 or P-H1431-12BK3

Measures 6" wide by 6" deep. Rear height is 2.13" and front height is 1.13" with a 15 degree slope
Features:

• 18 gauge steel base for extra strength
• Easy to machine - aluminum top panels are 0.064" thick aluminum.
• Sides include vertical rows of ventilation
• Sold pre-assembled with a two tone grey powder paint finish (base is dark satin gray, slope top is smooth light grey).
• Comes with four self adhesive rubber feet and required hardware.

Eddystone 27134PSLA enclosure with similar dimensions to the Hammond 1590B enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590B style builds.

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Aluminum alloy to BS1490, LM2M - supplied in natural finish.
• Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
• Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
• Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
• Countersunk lid holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".

• Heavy duty construction walnut chassis.
• Top panel in natural aluminium.
• Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
• Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
• Includes four large round rubber feet (0.75" dia.

Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).

Hammond Mfg 20 gauge steel 7” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

20 gauge bottom chassis plate for P-H1444-1273 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

Short trapezoid shaped Hammond enclosure. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

• Dimensions shown are exterior dimensions.
• For use with the P-H1441 and P-H1444 series chassis.
• ASA 61 grey baked enamel finish.
• Four self-tapping screws included.

For satin black version, see P-H1451-22BK3

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-18 or P-H1431-18BK3

Walnut chassis with black aluminum top panel, measures 17 inches by 10 inches by 3 inches Features:

• Heavy duty construction walnut chassis
• Top panel available in satin black powder paint finish.
• Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing & dovetail construction methods. Designed to handle heavy components.
• Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick.

Eddystone 26827PSLA enclosure with similar dimensions to the Hammond 1590D enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590D style builds.

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Aluminum alloy to BS1490, LM2M - supplied in natural finish.
• Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
• Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
• Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
• Countersunk lid holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Hammond Mfg 20 gauge steel 12” x 10” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

Hammond Mfg 20 gauge steel 13.5” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8"" holes to allow installation of optional bottom plates).

Chassis box 17 inch wide by 14 inch deep by 3 inch tall

• Spot welded steel - heavy duty construction chassis.
• Finished in ASA 61 smooth grey or satin black powder paint
• Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3

The 1550P is a 3.15 in. x 2.17 in. x 0.83. diecast enclosure made by Hammond. This enclosure is a great option for extra compact builds while still offering plenty of room for an easy construction.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.
• M3.5-0.6 threaded holes for mounting the bottom plate. Screws included.

• Dimensions shown are exterior dimensions.
• For use with the P-H1441 and P-H1444 series chassis.
• ASA 61 grey baked enamel finish.
• Four self-tapping screws included.

For satin black version, see P-H1451-30BK3

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.

0.04" thick bottom chassis plate for P-H1444-10 (sold seperately).

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-22 or P-H1431-22BK3

Hammond Mfg. Diecast Aluminum Chassis Box – 7.4” x 4.7” x 1.3”. Made in Taiwan. Key Features: • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.