Enclosures / Chassis
Chassis Box - Hammond, Steel, 12" x 8" x 3"
Hammond Chassis Box, Steel, 12 in. x 8 in. x 3 in.
Colors Available:
- Spot welded heavy duty construction chassis.
- 0.036"" thick.
- Dimensions shown are exterior dimensions.
- Does not include cover. See P-H1431-22 Key
Starting at $37.48
Chassis Box - Hammond, Steel, 12" x 8" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-22 or P-H1431-22BK3
Colors Available:
$38.80
Chassis - Fender Style 5E3 Tweed Deluxe
Fender® style narrow panel Tweed Deluxe™(5E3) chassis.
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
- Chrome plated steel, .06" thick.
- Screened white lettering
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 2
- Chassis Dimensions: 14 1/2" x 4 1/8" x 2 5/8"
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95
Chassis Box - Hammond, Steel, 17" x 10" x 3"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-32 or P-H1431-32BK3
Colors Available:
$53.30
Chassis - Fender Style 5F6A Tweed Bassman
Fender® style narrow panel Tweed Bassman™(5F6A) chassis.
- Chrome plated steel, .06" thick.
- Screened white lettering
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 3
- Chassis Dimensions: 20'' x 4 1/8'' x 2 5/8''
$79.95
Chassis Cage - Hammond, Steel, 10" x 6" x 5.2"
- Dimensions shown are exterior dimensions.
- For use with the P-H1441 and P-H1444 series chassis.
- ASA 61 grey baked enamel finish.
- Four self-tapping screws included.
$58.20
Cover Plate - Hammond, Steel, 10" x 6", 20 Gauge
Hammond Mfg 20 gauge steel 10” x 6” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
$9.70
Cover Plate - Hammond, Steel, 8" x 4", 20 Gauge
Colors Available:
Special Order Item
Hammond Mfg 20 gauge steel 8” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$5.83
Chassis Cage - Hammond, Steel, 16" x 8" x 5.2"
Colors Available:
- Dimensions shown are exterior dimensions.
- For use with the P-H1441 and P-H1444 series chassis.
- Four self-tapping screws included.
$69.25
Cover Plate - Hammond, Steel, 17" x 4", 20 Gauge
20 gauge. Cover for chassis box 17 inch wide by 4 inch deep by 3 inch tall.
Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3
Colors Available:
- Spot welded steel - heavy duty construction chassis.
- Finished in ASA 61 smooth grey or satin black powder paint
- Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3
Starting at $9.37
Chassis Box - Hammond, Steel, 8" x 4" x 2"
Colors Available:
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$16.40
Cover Plate - Hammond, Steel, 12" x 10", 20 Gauge
Hammond Mfg 20 gauge steel 12” x 10” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $16.40
Cover Plate - Hammond, Steel, 16" x 8", 20 Gauge
Hammond Mfg 20 gauge steel 16” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $15.23
Chassis - Three Knob Fuzz, Pressed Steel
Pre-drilled three knob pedal enclosure made of pressed steel. This large enclosure is a close match to the original enclosures found on various vintage fuzz effects such as the Vox Tone Bender MKIII, Rotosound Fuzz, and Park Fuzz Sound. It features three holes for potentiometers, two top mounted holes for ⅜” jacks, and a footswitch hole. Comes with 4 rubber feet and a pack of mounting screws(packaged separately) for attaching the bottom plate.
- Footswitch Hole Diameter: 0.492 in. (12.5mm)
- Potentiometer Hole Diameter: 0.294 in. (7.47mm)
- Jack Hole Diameter: 0.447 in. (11.35mm)
$19.95
Cover Plate - Hammond, Steel, 17" x 14"
Colors Available:
Special Order Item
Cover for chassis box 17 inch wide by 14 inch deep. Finished in ASA 61 smooth grey or satin black powder paint. Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional ottom plates).
$23.42
Cover Plate - Hammond, Steel, 6" x 4", 20 Gauge
Hammond Mfg 20 gauge steel 6” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $5.35
Chassis - Mod® Electronics, Wedge Shaped Fuzz, Pre-drilled, Folded 20 ga. Steel
Pre-drilled wedge shaped pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original FZ-1 and FZ-1A Fuzz Tone enclosures but the predilled layout is inspired by the Octavio and the early Carlsbro fuzz. This provides a classic pedal design with a layout that is more compatible with modern pedalboards than the original Fuzz Tone layout. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The wedge shaped fuzz enclosure features a hinged bottom cover for easy access to the battery. The four screws that attach the bottom are included.
$36.95
Chassis Box - Hammond, Steel, 17" x 14" x 3"
Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3
Colors Available:
Special Order Item
Chassis box 17 inch wide by 14 inch deep by 3 inch tall- Spot welded steel - heavy duty construction chassis.
- Finished in ASA 61 smooth grey or satin black powder paint
- Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3
$74.97
Chassis Box - Hammond, Steel, 10" x 6" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See or P-H1431-16BK3
Colors Available:
$23.00
Chassis - Fender Style 5E3 Tweed Deluxe, Belton Socket Compatible
Fender® style narrow panel tweed Deluxe™(5E3) chassis. This chassis is compatible with the popular P-ST8-209MIP Belton octal sockets as well as with the Belton noval sockets such as P-ST9-700. The chrome plating has a polished mirror finish.
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
- Chrome plated steel, .045" thick.
- Screened white lettering
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 2
- Chassis Dimensions: 370mm x 106mm x 69mm
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95