Enclosures / Chassis
Chassis Box - 1590XX, Diecast, 5.72" x 4.77" x 1.55"
5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.
$8.80
Chassis Box - Hammond, 1590TRPC, Trapezoid, 5.95 x 3.74 x 1.38"
Uniquely shaped trapezoid Hammond enclosure. Screws included.
Colors Available:
$16.75
Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41", Hammered Silver
Limited Run!
1590N1 / 125B diecast enclosure finished in a hammered silver powdercoat. Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.- 4.77" x 2.58" x 1.41"
- Hammered silver powdercoat
- Die-Cast Aluminum
- Includes Box, Lid, And Screws
- Similar to Hammond P-H1590N1
- Add 0.16" to enclosure depth for lid
$14.95
Out of Stock
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06"
4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.
Colors Available:
Add 0.16" to enclosure depth for lid.
Starting at $5.95
Chassis Box - Hammond, 1550P, Diecast, 3.15” x 2.17” x 0.83”
The 1550P is a 3.15 in. x 2.17 in. x 0.83. diecast enclosure made by Hammond. This enclosure is a great option for extra compact builds while still offering plenty of room for an easy construction.
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
- M3.5-0.6 threaded holes for mounting the bottom plate. Screws included.
$7.75
Chassis Box - Hammond, 1590B2, Diecast, 4.43" x 2.38" x 1.32"
The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.
$9.40
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Silver
Limited Run!
1590B diecast enclosure finished in a hammered silver powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.- 4.40" x 2.38" x 1.06"
- Hammered silver powdercoat
- Die-Cast Aluminum
- Includes Box, Lid, And Screws
- Similar to Hammond P-H1590B
- Add 0.16" to enclosure depth for lid
$14.95
Out of Stock
Chassis Box - Hammond, 1590D, Diecast, 7.39" x 4.71" x 2.05"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Six 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$23.45
Chassis Box - Hammond, 1456, 30° Aluminum, 4" x 5.5" x 3"
30° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
Colors Available:
- 4" x 5.5" x 3" (1” height at front)
- Bottom panels are 0.081” (2 mm) thick aluminum
- Top panels are 0.064” thick aluminum
- Fully Powder Coated
- Comes with self adhesive rubber feet and required mounting hardware.
$30.90
Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$11.95
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Green
Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
Limited Run!
1590BB diecast enclosure finished in a hammered green powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.- 4.71" x 3.70" x 1.18"
- Hammered green powdercoat
- Die-Cast Aluminum
- Includes Box, Lid, And Screws
- Similar to Hammond P-H1590BB
- Add 0.16" to enclosure depth for lid.
Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock
Chassis Box - Hammond, 1590F, Diecast, 7.40" x 7.40" x 2.48"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Six 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
$33.10
Chassis Box - Hammond, 1456, 30° Aluminum/Wood, 4" x 5.5" x 3"
30° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
- 4" x 5.5" x 3" (1” height at front)
- Top panels are 0.064” thick aluminum
- Powder coated top and bottom
- Wood sides are real walnut - each piece has a unique color & grain.
- Solid oiled walnut sides on a black, ventilated steel base.
- Comes with self adhesive rubber feet and required mounting hardware.
$87.90
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Green
Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
Limited Run!
1590B diecast enclosure finished in a hammered green powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.- 4.40" x 2.38" x 1.06"
- Hammered green powdercoat
- Die-Cast Aluminum
- Includes Box, Lid, And Screws
- Similar to Hammond P-H1590B
- Add 0.16" to enclosure depth for lid.
Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock
Chassis Box - 1590DD, Diecast, 7.40" x 4.72" x 1.30"
Diecast Aluminum Chassis Box, 7.40" x 4.72" x 1.30". Six included machine screws secure lid. Add 0.16" to enclosure depth for lid.
$13.55
Chassis Box - Hammond, 1590N1, Diecast, 4.77" x 2.58" x 1.41"
Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Add 0.16" to enclosure depth for lid.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Add 0.16" to enclosure depth for lid.
$12.50
Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
Starting at $13.95
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Bronze
Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
Limited Run!
1590B diecast enclosure finished in a hammered bronze powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.- 4.40" x 2.38" x 1.06"
- Hammered bronze powdercoat
- Die-Cast Aluminum
- Includes Box, Lid, And Screws
- Similar to Hammond P-H1590B
- Add 0.16" to enclosure depth for lid.
Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.95
Out of Stock
Chassis Box - GØRVA Design, C65, Diecast, 4.72” x 2.56” x 1.54”
The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:
Colors Available:
- Slightly beveled top and rounded corners for high quality look.
- Tight fit and small gap between the enclosure and lid.
- Undercut boss allows more internal room for more flexible layout.
- Smooth, eggshell-like matte powder coating.
- Recessed bottom lid
Starting at $10.45
Chassis Box - Hammond, 1590V, Diecast, 4.70" x 4.70" x 3.54"
Special Order Item
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$23.00
Out of Stock
Chassis Box - Hammond, 1591BTCL, Crystal Clear, Polycarbonate, 4.40 x 2.40 x 1.10
1591T Series enclosure made of clear polycarbonate. The 1591B is a similar size to the 1590B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.
- Ideally suited for mounting printed circuit boards.
- Perfect for applications where parts, sensors or indicators need to be visible.
- Crystal Clear version is almost totally transparent.
- Integral card guides accept 1.5 mm (0.062”) P.C. cards.
- Lap joint construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
- Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.
$8.95
Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41", Hammered Bronze
Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
Limited Run!
1590N1 / 125B diecast enclosure finished in a hammered bronze powdercoat. Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.- 4.77" x 2.58" x 1.41"
- Hammered bronze powdercoat
- Die-Cast Aluminum
- Includes Box, Lid, And Screws
- Similar to Hammond P-H1590N1
- Add 0.16" to enclosure depth for lid.
Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.75
Out of Stock
Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
Colors Available:
Starting at $1.35
package of 4
Chassis Box - Hammond, 1590XX, Diecast, 5.72" x 4.77" x 1.39"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$14.95