Enclosures / Chassis
Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$11.95
Chassis Box - YY, Diecast, Slanted, 4.65" x 3.70" x 1.66", Hammered Charcoal
Part of a limited run of hammered charcoal enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-CHC C65 (Gorva) P-H1590N1-GORVA-HMT-CHC 1590N1/125B P-H1590N1CE-HMT-CHC 1590TRPD Trapezoid P-H1590TRPB-HMT-CHC YY P-H-YY-HMT-CHC S90 (Gorva) P-H1590BB-GORVA-HMT-CHC 1590J P-H1590J-HMT-CHC
Limited Run!
YY enclosure finished in a hammered charcoal powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features- Vintage style slant
- Hammered charcoal powdercoat
- Flat top-section for mounting controls
- Recessed lid
- Thick diecast construction
Part of a limited run of hammered charcoal enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-CHC C65 (Gorva) P-H1590N1-GORVA-HMT-CHC 1590N1/125B P-H1590N1CE-HMT-CHC 1590TRPD Trapezoid P-H1590TRPB-HMT-CHC YY P-H-YY-HMT-CHC S90 (Gorva) P-H1590BB-GORVA-HMT-CHC 1590J P-H1590J-HMT-CHC
$35.95
Chassis Box - Hammond, 1590LB, Diecast, 1.99" x 1.99" x 1.06"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $7.45
Chassis Box - Hammond, 1590C, Diecast, 4.71" x 3.70" x 2.07"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $12.95
Chassis Box - Hammond, 1590P1, Diecast, 6.02” x 3.27” x 1.98”
Large 6.02” x 3.27” x 1.98” Hammond 1590P1 enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
Starting at $14.85
Chassis Box - Hammond, 1590B2, Diecast, 4.43" x 2.38" x 1.32"
The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.
$9.40
Chassis Box - Hammond, 1590B3, Diecast, 4.57" x 3.03" x 1.32"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$10.80
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Bronze
Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
Limited Run!
1590B diecast enclosure finished in a hammered bronze powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.- 4.40" x 2.38" x 1.06"
- Hammered bronze powdercoat
- Die-Cast Aluminum
- Includes Box, Lid, And Screws
- Similar to Hammond P-H1590B
- Add 0.16" to enclosure depth for lid.
Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.95
Out of Stock
Chassis Box - 1590BS, Diecast, 4.40" x 2.38" x 1.65"
4.40" x 2.38" x 1.65" (112mm x 61m x 42mm) diecast aluminum enclosure. Equivalent to the Hammond 1590BS enclosure. This enclosure is a taller version of the 1590B allowing for top mounted jack and more overall area for larger projects.
$6.95
Chassis - Fender Style 5E3 Tweed Deluxe, Belton Socket Compatible
Fender® style narrow panel tweed Deluxe™(5E3) chassis. This chassis is compatible with the popular P-ST8-209MIP Belton octal sockets as well as with the Belton noval sockets such as P-ST9-700. The chrome plating has a polished mirror finish.
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
- Chrome plated steel, .045" thick.
- Screened white lettering
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 2
- Chassis Dimensions: 370mm x 106mm x 69mm
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95
Cover Plate - Hammond, Steel, 7" x 5", 20 Gauge
Hammond Mfg 20 gauge steel 7” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $5.95
Chassis Box - Hammond, Aluminum, 13" x 7" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$25.50
Chassis Box - Hammond, Steel, 7" x 5" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-12 or P-H1431-12BK3
Colors Available:
Starting at $16.45
Chassis Box - Hammond, Steel, 12" x 8" x 3"
Hammond Chassis Box, Steel, 12 in. x 8 in. x 3 in.
Colors Available:
- Spot welded heavy duty construction chassis.
- 0.036"" thick.
- Dimensions shown are exterior dimensions.
- Does not include cover. See P-H1431-22 Key
Starting at $37.48
Chassis Box - Hammond, 1590XX, Diecast, 5.72" x 4.77" x 1.39"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$14.95
Chassis - Fender Style 5E3 Tweed Deluxe
Fender® style narrow panel Tweed Deluxe™(5E3) chassis.
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
- Chrome plated steel, .06" thick.
- Screened white lettering
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 2
- Chassis Dimensions: 14 1/2" x 4 1/8" x 2 5/8"
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95
Chassis - Mod®, Buzzaround, Pre-drilled, Hammered Dark Gray
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original Burns Buzzaround enclosures and is pre-drilled to match the original layout of the Buzzaround pedal. The hammered dark gray powder coat provides a close match for the original appearance but will hold up much better than the paint found on the vintage pedals.
$74.95
Chassis Box - Hammond, Aluminum, 7" x 5" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$15.70
Chassis Box - Hammond, 1550P, Diecast, 3.15” x 2.17” x 0.83”
The 1550P is a 3.15 in. x 2.17 in. x 0.83. diecast enclosure made by Hammond. This enclosure is a great option for extra compact builds while still offering plenty of room for an easy construction.
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
- M3.5-0.6 threaded holes for mounting the bottom plate. Screws included.
$7.75
Handle - Hammond, Steel Construction, 3.5”, 1427N2
Round metal handle with 3.5" mounting centers and 1.5" height. These handles are great for amplifiers, rackmount gear, and guitar pedals. Mounting screws and lock washers are included. Features
Colors Available:
- Made of round steel
- 2 Screws - Panhead 8-32 x 1/2"
- 2 Internal Tooth Lockwashers
Starting at $5.15
Cover Plate - Hammond, Aluminum, 10" x 6", 20 Gauge
20 gauge bottom chassis plate for P-H1444-16 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$10.50
Chassis Box - 1590DD, Diecast, 7.40" x 4.72" x 1.30"
Diecast Aluminum Chassis Box, 7.40" x 4.72" x 1.30". Six included machine screws secure lid. Add 0.16" to enclosure depth for lid.
$13.55
Chassis Box - Hammond, Aluminum, 12" x 8" x 2"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$35.10
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Predrilled
Predrilled 1590BB enclosures. Measures 4.71" x 3.70" x 1.18" deep. These enclosures come drilled with holes for pots, footswitch and top mounted jacks.
Colors Available:
- Standard size footswitch mounting hole fits 12mm or 15/32” bushings
- ⅜” mounting holes for top mounted jacks
- Enclosed or low profile ¼” jacks recommended
- Top mounted DC jack mounting hole fits common switched jacks such as S-H750-X and P-JBLB-IN-S
- 8mm potentiometer mounting holes fit a variety of different pot sizes but 16mm pots are recommended.
Starting at $9.95