Enclosures / Chassis
Hammond
Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Predrilled
Predrilled 1590BB enclosures. Measures 4.71" x 3.70" x 1.18" deep. These enclosures come drilled with holes for pots, footswitch and top mounted jacks.
Colors Available:
- Standard size footswitch mounting hole fits 12mm or 15/32” bushings
- ⅜” mounting holes for top mounted jacks
- Enclosed or low profile ¼” jacks recommended
- Top mounted DC jack mounting hole fits common switched jacks such as S-H750-X and P-JBLB-IN-S
- 8mm potentiometer mounting holes fit a variety of different pot sizes but 16mm pots are recommended.
Starting at $9.95
Chassis Box - Hammond, 1590G, Diecast, 3.94" x 1.97" x 0.83"
Add 0.16" to enclosure depth for lid.
Special Order Item
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x 1/2" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.Add 0.16" to enclosure depth for lid.
$8.73
Out of Stock
Cover Plate - Hammond, Steel, 12" x 8", 20 Gauge
Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $12.95
Chassis Box - Hammond, Steel, 7" x 5" x 2", Walnut Side Panels
Special Order Item
7" wide x 5" long x 2" tall steel chassis with walnut side panels Features:- Spot welded steel (20 gauge) - heavy duty construction chassis.
- Steel chassis is finished in satin black powder paint
- Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
- Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.
$104.45
Chassis Box - Hammond, 1456, 15° Aluminum, 4" x 5.5" x 2"
15° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
Colors Available:
- 4" x 5.5" x 2" (1” height at front)
- Bottom panels are 0.081” (2 mm) thick aluminum
- Top panels are 0.064” thick aluminum
- Fully Powder Coated
- Comes with self adhesive rubber feet and required mounting hardware.
$30.90
Chassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $8.75
Chassis Box - Hammond, Aluminum, 4.5" x 3.5" x 1"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$11.70
Out of Stock
Chassis Box - Hammond, Aluminum, 9" x 5" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
$19.35
Chassis Box - Hammond, Steel, 17" x 10" x 3"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-32 or P-H1431-32BK3
Colors Available:
$53.30
Chassis Box - Hammond, Steel, 16" x 8" x 3"
Hammond Chassis Box, steel, 16 in. x 8 in. x 3 in.
Colors Available:
- Spot welded heavy duty construction chassis.
- 0.036" thick.
- Dimensions shown are exterior dimensions.
- Does not include cover. See P-H1431-26
$47.25
Cover Plate - Hammond, Aluminum, 16" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-26 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$14.55
Cover Plate - Hammond, Steel, 17" x 10", 20 Gauge
20 gauge. Cover for chassis box 17 inch wide by 10 inch deep. Spot welded steel - heavy duty construction chassis. Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
Colors Available:
$19.35
Chassis Box - Hammond, Aluminum, 12" x 10" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Spot-welded heavy duty construction. See P-H1434-29 for cover
$33.95
Chassis Box - Hammond, 1456, 15° Aluminum/Wood, 4" x 5.5" x 2"
15° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes.
Features:
Colors Available:
Features:
- 4" x 5.5" x 2" (1” height at front)
- Top panels are 0.064” thick aluminum
- Powder coated top and bottom
- Wood sides are real walnut - each piece has a unique color & grain.
- Solid oiled walnut sides on a black, ventilated steel base.
- Comes with self adhesive rubber feet and required mounting hardware.
Starting at $59.95
Chassis Box - Hammond, 1590C, Diecast, 4.71" x 3.70" x 2.07"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $12.95
Cover Plate - Hammond, Aluminum, 10" x 8"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$10.55
Out of Stock
Chassis Box - Hammond, Aluminum, 17" x 10" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
$41.20
Chassis Box - Hammond, Aluminum, 7" x 5" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$15.70
Chassis Box - Hammond, 17" x 12" x 3", 1444-17123
Special Order Item
Hammond natural aluminum chassis box. Measures 17" x 12" x 3".
$45.08
Chassis Box - Hammond, Aluminum, 17" x 8" x 3"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
Features:
- Spot-welded heavy duty construction
- Natural finish
$36.95
Cover Plate - Hammond, Aluminum, 7" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-12 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$6.05
Chassis Box - Hammond, Aluminum, 14" x 10" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
$40.97
Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
Starting at $13.95
Chassis Box - Hammond, 1590E, Diecast, 7.40" x 4.72" x 3.07"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Six 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
$26.30