Enclosures / Chassis

Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

Cover for chassis box 17 inch wide by 14 inch deep. Finished in ASA 61 smooth grey or satin black powder paint. Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional ottom plates).

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Fender® style narrow panel Tweed Bassman™(5F6A) chassis.

• Chrome plated steel, .06" thick.
• Screened white lettering
• 8-Pin (Octal) socket holes: 3
• 9-Pin (miniature) socket holes: 3
• Chassis Dimensions: 20'' x 4 1/8'' x 2 5/8''

1591T Series enclosure made of clear polycarbonate. The 1591B is a similar size to the 1590B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.

• Ideally suited for mounting printed circuit boards.
• Perfect for applications where parts, sensors or indicators need to be visible.
• Crystal Clear version is almost totally transparent.
• Integral card guides accept 1.5 mm (0.062”) P.C. cards.
• Lap joint construction provides protection against access of dust and splashing water.
• Designed to meet IP54.
• Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
• Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.

Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).

1590B diecast enclosure finished in a hammered green powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.

• 4.40" x 2.38" x 1.06"
• Hammered green powdercoat
• Die-Cast Aluminum
• Includes Box, Lid, And Screws
• Similar to Hammond P-H1590B
• Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-32 or P-H1431-32BK3

Natural aluminum panel measuring 15.75 inches by 8.75 inches

1.99″ x 1.99″ x 1.22″ (51mm x 51mm x 31mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590LBX enclosure. This enclosure is great for tap tempos and other utility pedals.

Spot welded heavy duty construction chassis. 0.036 thick. Does not include cover. please refer to P-H1431-29

20 gauge. Cover for chassis box 17 inch wide by 10 inch deep. Spot welded steel - heavy duty construction chassis. Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

17 inch wide by 10 inch deep by 2 inches tall

• Spot welded steel - heavy duty construction chassis.
• Finished in ASA 61 smooth grey
• Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-30 P-H1431-30 Steel Black Satin P-H1431-30BK3

1 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.

• Strong construction, yet light weight using all aluminum components
• Suitable for desk top or rack-mountable applications.
• Knockdown design ships un-assembled for easy handling and shipping protection.
• Strong construction using:
  
  • extruded aluminum side panels 0.125" (3.2 mm) thick
  • extruded aluminum front & rear panels 0.125" (3.2mm) thick
  • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
• Can be used with or without rack mounting brackets (one pair included)
• Front & rear panel are interchangeable.
• Enclosure is finished in rugged, textured, black powder coat.
• Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
• Manufactured in North America.

Chassis box perfectly suited for effects pedals and other DIY projects.

Marshall™ style JTM45 chassis w/ front and back plates

• Brushed aluminum chassis, .07" thick.
• Gold “plexi” style front and back plates
• 8-Pin (Octal) socket holes: 3
• 9-Pin (miniature) socket holes: 3
• Capacitor mounting holes:1
• Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:

• Power transformer mounting centers: 3-7/16” x 2-3/4”
• Output transformer mounting centers: 2-1/2” x 2-3/8”
• Choke mounting centers: (#1) 2-7/8” (#2) 3-3/16”
• Can cap mounting centers : 2”
• Octal (8-pin) tube sockets: 1-1/2”
• Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:

• Noval socket with shield base: P-ST9-700
• Noval socket (no shield): P-ST9-600
• Octal socket : P-ST8-600
• Output transformer: P-T1750Q
• Choke: P-C194G

Eddystone 27969PSLA enclosure with similar dimensions to the Hammond 1590A enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590A style builds.

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Aluminum alloy to BS1490, LM2M - supplied in natural finish.
• Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
• Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
• Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
• Countersunk lid holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.

1590B diecast enclosure finished in a hammered bronze powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.

• 4.40" x 2.38" x 1.06"
• Hammered bronze powdercoat
• Die-Cast Aluminum
• Includes Box, Lid, And Screws
• Similar to Hammond P-H1590B
• Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-12

Uniquely shaped trapezoid Hammond enclosure. Screws included.

Slanted YY enclosures perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features

• Vintage style slant
• Flat top-section for mounting controls
• Recessed lid
• Thick diecast construction

Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23" x 5.23" x 1.38"
Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine)
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x 1/2” machine screws secure lid into factory tapped holes
• Designed to meet IP54
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting