Enclosures / Chassis

Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Add 0.16" to enclosure depth for lid.

Hammond Chassis Box, Aluminum, 16 in. x 8 in. x 3 in. Spot-welded heavy duty construction, natural finish. See P-H1434-26 for cover.

Hammond natural aluminum chassis box. Measures 7" x 5" x 3".

• Dimensions shown are exterior dimensions.
• For use with the P-H1441 and P-H1444 series chassis.
• ASA 61 grey baked enamel finish.
• Four self-tapping screws included.

20 gauge bottom chassis plate for P-H1444-8 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.

Eddystone 26827PSLA enclosure with similar dimensions to the Hammond 1590D enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590D style builds.

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Aluminum alloy to BS1490, LM2M - supplied in natural finish.
• Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
• Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
• Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
• Countersunk lid holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Fender® style tweed Champ™(5F1) chassis. This chassis is compatible with the popular P-ST8-209MIP Belton octal sockets as well as with the Belton noval sockets such as P-ST9-700. The chrome plating has a polished mirror finish.

• Chrome plated steel, .045" thick.
• Screened white lettering
• 8-Pin (Octal) socket holes: 2
• 9-Pin (miniature) socket holes: 1
• Chassis Dimensions: 8-¾" x 4-⅛" x 2 ⅝"

• Dimensions shown are exterior dimensions.
• For use with the P-H1441 and P-H1444 series chassis.
• Four self-tapping screws included.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Six 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.

The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:

• Hammered charcoal powdercoat
• Slightly beveled top and rounded corners for high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room for more flexible layout.
• Smooth, eggshell-like matte powder coating.
• Recessed bottom lid

Part of a limited run of hammered charcoal enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-CHC C65 (Gorva) P-H1590N1-GORVA-HMT-CHC 1590N1/125B P-H1590N1CE-HMT-CHC 1590TRPD Trapezoid P-H1590TRPB-HMT-CHC YY P-H-YY-HMT-CHC S90 (Gorva) P-H1590BB-GORVA-HMT-CHC 1590J P-H1590J-HMT-CHC

Marshall™ style JTM45 chassis w/ front and back plates

• Brushed aluminum chassis, .07" thick.
• Gold “plexi” style front and back plates
• 8-Pin (Octal) socket holes: 3
• 9-Pin (miniature) socket holes: 3
• Capacitor mounting holes:1
• Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:

• Power transformer mounting centers: 3-7/16” x 2-3/4”
• Output transformer mounting centers: 2-1/2” x 2-3/8”
• Choke mounting centers: (#1) 2-7/8” (#2) 3-3/16”
• Can cap mounting centers : 2”
• Octal (8-pin) tube sockets: 1-1/2”
• Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:

• Noval socket with shield base: P-ST9-700
• Noval socket (no shield): P-ST9-600
• Octal socket : P-ST8-600
• Output transformer: P-T1750Q
• Choke: P-C194G

Hammond Mfg 20 gauge steel 10” x 6” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

17 inch wide by 10 inch deep by 2 inches tall

• Spot welded steel - heavy duty construction chassis.
• Finished in ASA 61 smooth grey
• Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-30 P-H1431-30 Steel Black Satin P-H1431-30BK3

Hammond Chassis Box, Aluminum, 12 in. x 8 in. x 3 in. Spot-welded heavy duty construction, natural finish. See P-H1434-22 for cover.

15° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes.
Features:

• 4" x 5.5" x 2" (1” height at front)
• Top panels are 0.064” thick aluminum
• Powder coated top and bottom
• Wood sides are real walnut - each piece has a unique color & grain.
• Solid oiled walnut sides on a black, ventilated steel base.
• Comes with self adhesive rubber feet and required mounting hardware.

Square 3.62” x 3.62” x 1.50” Hammond 1590Y enclosure. This enclosure is a stylish option for builds offering a similar amount of space as a 1950BB enclosure.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

Marshall™ style 18 Watt TMB chassis w/ front and back plates

• Brushed aluminum chassis, .07" thick.
• Gold “plexi” style front and back plates
• 9-Pin (miniature) socket holes: 6
• Capacitor mounting holes:1
• Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:

• Power transformer mounting centers: 3-1/8” x 2-1/2”
• Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
• Can cap mounting centers : 2”
• Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:

• Noval socket with shield base: P-ST9-700
• Noval socket (no shield): P-ST9-600

20 gauge bottom chassis plate for P-H1444-1053
Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

20 gauge bottom chassis plate for P-H1444-1372
Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-18 or P-H1431-18BK3

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.

1591T Series enclosure made of clear polycarbonate. The 1591B is a similar size to the 1590B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.

• Ideally suited for mounting printed circuit boards.
• Perfect for applications where parts, sensors or indicators need to be visible.
• Crystal Clear version is almost totally transparent.
• Integral card guides accept 1.5 mm (0.062”) P.C. cards.
• Lap joint construction provides protection against access of dust and splashing water.
• Designed to meet IP54.
• Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
• Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.

Hammond Mfg 20 gauge steel 12” x 10” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).