Enclosures / Chassis

Cover Plate - Hammond, Steel, 6" x 4", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 6” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Starting at $5.35
Chassis Box - Hammond, Steel, 17" x 10" x 2"
Colors Available:
Special Order Item
17 inch wide by 10 inch deep by 2 inches tall
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-30 P-H1431-30 Steel Black Satin P-H1431-30BK3
$41.84
Note: special order items require additional lead time. See our page on special order items.
Chassis Cage - Hammond, Steel, 10" x 12" x 5.2", Black
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • Satin black baked enamel finish.
  • Four self-tapping screws included.
$62.38
Chassis Box - Hammond, 1456, 30° Aluminum/Wood, 4" x 5.5" x 3"
30° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
  • 4" x 5.5" x 3" (1” height at front)
  • Top panels are 0.064” thick aluminum
  • Powder coated top and bottom
  • Wood sides are real walnut - each piece has a unique color & grain.
  • Solid oiled walnut sides on a black, ventilated steel base.
  • Comes with self adhesive rubber feet and required mounting hardware.
$87.90
Chassis Box - Hammond, 29830PSLA, Eddystone 1590BB, Diecast, 4.7” x 3.7” x 1.3”
Eddystone 29830PSLA enclosure with similar dimensions to the Hammond 1590BB enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590BB style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$18.95
Rack-mounted Enclosure - Hammond, 1U, full-width
1 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
  • Manufactured in North America.
Starting at $157.98
Chassis Box - Hammond, Steel, 8" x 4" x 2"
Colors Available:
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$15.62
Note: special order items require additional lead time. See our page on special order items.
Chassis Box - Hammond, Steel, 17" x 14" x 5"
Colors Available:
Special Order Item
Cover for chassis box 17 inch wide by 14 inch deep by 5 inch tall.
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
$83.65
Note: special order items require additional lead time. See our page on special order items.
Chassis Box - Hammond, Steel, 8" x 4" x 1"
Colors Available:
Special Order Item
8 inch wide by 4 inch deep by 1 inch tall
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-9 P-H1431-9 Steel Black Satin P-H1441-9BK3 P-H1431-9BK3
$15.62
Note: special order items require additional lead time. See our page on special order items.
Chassis Box - Hammond, 27969PSLA, Eddystone 1590A, Diecast, 3.6” x 1.5” x 1.2”
Eddystone 27969PSLA enclosure with similar dimensions to the Hammond 1590A enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590A style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$11.95
Chassis - Marshall Style 18 Watt Tremolo
Marshall™ style 18 Watt Tremolo chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 9-Pin (miniature) socket holes: 6
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-1/8” x 2-1/2”
  • Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
  • Can cap mounting centers : 2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
$104.95
Cover Plate - Hammond, Aluminum, 11.75" x 8.75"
Colors Available:
Special Order Item
Bottom panel for use with Hammond HWCHAS1310 Natural Aluminum. 11.75" W X 8.75" D
Starting at $12.70
Note: special order items require additional lead time. See our page on special order items.
Rack-mounted Enclosure - Hammond, 2U, half-width
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, and all assembly hardware
  • Manufactured in North America.
Starting at $133.25
Rack-mounted Enclosure - Hammond, 2U, full-width
2 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
  • Manufactured in North America.
Starting at $188.33
Rack-mounted Enclosure - Hammond, 3U, half-width
3 rack unit tall, extruded aluminum, 8.5" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, and all assembly hardware
  • Manufactured in North America.
Starting at $141.51
Rack-mounted Enclosure - Hammond, 3U, full-width
3 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
  • Manufactured in North America.
Starting at $224.97
Rack-mounted Enclosure - Hammond, 4U, full-width
4 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
  • Manufactured in North America.
Starting at $247.51
Chassis Box - Hammond, Walnut / Aluminum, 13" x 10" x 3"
Colors Available:
Special Order Item
Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".
  • Heavy duty construction walnut chassis.
  • Top panel in natural aluminium.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.
Starting at $253.97
Note: special order items require additional lead time. See our page on special order items.
Chassis Box - Hammond, Aluminum, 10" x 5.5" x 3" to 1.1", Sloped
Special Order Item
Hammond black top and blue case sloped aluminum console. 10 inches wide by 5.5 inch depth. Front of console is 1.1 inches high and rear is 3 inches high. Features:
  • Aluminum cases 0.081" thick aluminum
  • Pre-assembled with a textured blue case and a black top panel.
  • Comes with self adhesive rubber feet and required mounting hardware
$38.73
Out of Stock
Cover Plate - Hammond, Aluminum, 12" x 7", 20 Gauge
Special Order Item
20 gauge bottom chassis plate for P-H1444-1273 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$8.37
Note: special order items require additional lead time. See our page on special order items.
Chassis Box - Hammond, Aluminum, 8" x 6" x 2"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$16.73
Out of Stock
Chassis Box - Hammond, Utility, 1411L
Special Order Item
Hammond Mfg aluminum utility enclosure 5.0” length x 4.0” width x 3.0” height. Key Features:
  • "1411" series - 0.04" thick aluminum
  • Four 6-32 x ¼” self-tapping screws included.
  • ASA 61 grey - baked powder paint.
  • Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
$13.38
Note: special order items require additional lead time. See our page on special order items.
Chassis Cover - Hammond, Aluminum, 17" x 12"
Special Order Item
Hammond aluminum, heavy-duty chassis cover. Measures 17 in. by 12 in.
$17.83
Note: special order items require additional lead time. See our page on special order items.
Chassis Box - Hammond, 1590V, Diecast, 4.70" x 4.70" x 3.54"
Special Order Item
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$21.90
Note: special order items require additional lead time. See our page on special order items.