You are here

Enclosures

Hammond - Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(13 pages)
P-H1434-8Cover Plate - Hammond, Aluminum, 6" x 4", 20 Gauge

20 gauge bottom chassis plate for P-H1444-8 Features:



  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter

$4.94
Click to read more
P-H1590XChassis Box - Hammond, Diecast Aluminum, 5.7" x 4.8" x 2.1"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$14.34
Click to read more
P-H1590G2Chassis Box - Hammond, Diecast Aluminum, 3.9" x 2.0" x 1.2"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$7.95
Click to read more
P-H1434-10Cover Plate - Hammond, Aluminum, 8" x 4", 0.04" Thick

0.04" thick bottom chassis plate for P-H1444-10 (sold seperately).

$5.25
Click to read more
P-H1431-8XCover Plate - Hammond, Steel, 6" x 4", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 6” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$4.03
Click to read more
P-H1434-29Cover Plate - Hammond, Aluminum, 12" x 10", 20 Gauge

20 gauge bottom chassis plate for P-H1444-29 Features:



  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter

$11.23
Click to read more
P-H1590EChassis Box - Hammond, Diecast Aluminum, 7.38" x 4.70" x 3.07"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.

$21.69
Click to read more
P-H1434-14Cover Plate - Hammond, Aluminum, 9" x 5", 0.04" Thick

0.04" thick bottom chassis plate for P-H1444-14 (sold seperately).


$5.45
Click to read more
P-H1441-20XChassis Box - Hammond, Steel, 17" x 4" x 3"
Colors Available:

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Chassis box 17 inch wide by 4 inch deep by 3 inch tall.



  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).


Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3


Starting at $29.61
Note: P-H1441-20BK3: Black is a special order item.
Click to read more
P-H1441-8XChassis Box - Hammond, Steel, 6" x 4" x 2"
Colors Available:

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-8 or P-H1431-8BK3


Starting at $11.66
Click to read more

Pages

(13 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Enclosures