 | Cover Plate - Hammond, Steel, 7" x 5", 20 GaugeHammond Mfg 20 gauge steel 7” x 5” cover plate.
- Finished in ASA 61 smooth grey paint.
- Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
| $4.48 | Click to read more |
 | Chassis Cage - Hammond, Steel, 12" x 8" x 5.2"- Dimensions shown are exterior dimensions.
- For use with the P-H1441 and P-H1444 series chassis.
- ASA 61 grey baked enamel finish.
- Four self-tapping screws included.
For satin black version, see P-H1451-22BK3 | $49.21 | Click to read more |
 | Cover Plate - Hammond, Steel, 13.5" x 5", Black13.5" x 5" cover plate by Hammond. Fits P-H1441-18BK3
Key Features:
- 20 gauge
- Spot welded steel - heavy duty construction chassis.
- Finished in satin black powder paint.
| $8.08 | Click to read more |
 | Chassis Cage - Hammond, Steel, 16" x 8" x 5.2"- Dimensions shown are exterior dimensions.
- For use with the P-H1441 and P-H1444 series chassis.
- ASA 61 grey baked enamel finish.
- Four self-tapping screws included.
For satin black version, see P-H1451-26BK3 | $51.32 | Click to read more |
 | Chassis Box - Hammond, Unpainted Aluminum, 5.3" x 4.4" x 2.2"- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
| $14.34 | Click to read more |
 | Chassis Box - Hammond, Aluminum, 4.67" x 3.68" x 1.1", Black- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Painted with tough polyester powder paint for a lasting finish, even after machining.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
| $11.80 | Click to read more |
 | Chassis Box - Hammond, Unpainted Aluminum, 7.38" x 4.70" x 3.07"- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Six 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
| $21.69 | Click to read more |
 | Chassis Box - Hammond, Unpainted Aluminum, 7.38" x 7.38" x 2.48"- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Six 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
| $27.31 | Click to read more |
 | Chassis Box - Hammond, Unpainted Aluminum, 4.77" x 2.6" x 1.39" Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges. | $10.81 | Click to read more |
 | Cover Plate - Hammond, Steel, 6" x 4", 20 GaugeHammond Mfg 20 gauge steel 6” x 4” cover plate.
- Finished in ASA 61 smooth grey paint.
- Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
| $4.03 | Click to read more |
480.820.5411