Enclosures / Chassis

The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.

20 gauge. Cover for chassis box 17 inch wide by 4 inch deep by 3 inch tall.

• Spot welded steel - heavy duty construction chassis.
• Finished in ASA 61 smooth grey or satin black powder paint
• Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3

Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).

1591T Series enclosure made of clear polycarbonate. The 1591B is a similar size to the 1590B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.

• Ideally suited for mounting printed circuit boards.
• Perfect for applications where parts, sensors or indicators need to be visible.
• Crystal Clear version is almost totally transparent.
• Integral card guides accept 1.5 mm (0.062”) P.C. cards.
• Lap joint construction provides protection against access of dust and splashing water.
• Designed to meet IP54.
• Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
• Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.

5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.

20 gauge bottom chassis plate for P-H1444-1273 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x 1/2" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Add 0.16" to enclosure depth for lid.

4.72" x 3.70" x 2.1" (119mm x 94mm x 56mm) diecast aluminum enclosure. Equivalent to the Hammond 1590C enclosure. This enclosure is a taller version of the 1590BB allowing for more vertical space for larger projects.

The 1550P is a 3.15 in. x 2.17 in. x 0.83. diecast enclosure made by Hammond. This enclosure is a great option for extra compact builds while still offering plenty of room for an easy construction.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.
• M3.5-0.6 threaded holes for mounting the bottom plate. Screws included.

Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Measures 4.77" x 2.58" x 1.41". Add 0.16" to enclosure depth for lid.

0.04" thick bottom chassis plate for P-H1444-14 (sold seperately).

4.40" x 2.38" x 1.65" (112mm x 61m x 42mm) diecast aluminum enclosure. Equivalent to the Hammond 1590BS enclosure. This enclosure is a taller version of the 1590B allowing for top mounted jack and more overall area for larger projects.

0.04" thick bottom chassis plate for P-H1444-10 (sold seperately).

20 gauge bottom chassis plate for P-H1444-8 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).

Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.

20 gauge bottom chassis plate for P-H1444-1053
Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

20 gauge bottom chassis plate for P-H1444-12 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.

Hammond Mfg 20 gauge steel 7” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).