You are here

Enclosures

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(13 pages)
P-H1451-26XChassis Cage - Hammond, Steel, 16" x 8" x 5.2"
Colors Available:
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • Four self-tapping screws included.
$51.32
Starting at $46.19
You save: 10%
Click to read more
P-HWCHAS1310XChassis Box - Hammond, Walnut / Aluminum, 13" x 10" x 3"
Colors Available:

Special Order Item

Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".



  • Heavy duty construction walnut chassis.
  • Top panel in natural aluminium.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.

$94.79
Starting at $85.31
You save: 10%
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-HHW1310XPLCover Plate - Hammond, Aluminum, 11.75" x 8.75"
Colors Available:

Special Order Item

Bottom panel for use with Hammond HWCHAS1310 Natural Aluminum. 11.75" W X 8.75" D


$11.62
Starting at $10.46
You save: 10%
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1590GChassis Box - Hammond, Unpainted Aluminum, 3.94" x 1.97" x 0.83"
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
Vibra finished for a smooth surface with no sharp edges.
Four 6-32 x ½" machine screws secure lid - into tapped holes.
Designed to meet IP54.
Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$8.77
$7.89
You save: 10%
Click to read more
Chassis Cage - Hammond, Steel, 10" x 12" x 5.2", Black
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • Satin black baked enamel finish.
  • Four self-tapping screws included.
$56.60
$50.94
You save: 10%
Click to read more
P-H1455N2201BUEnclosure - Hammond, Extruded Aluminum, 8.66" x 4.06" x 2.09", Blue

Hammond extruded aluminum enclosure, blue anodized finish. This genuine Hammond enclosure is great for a wide variety of projects from effects pedals to small preamp/compressor builds. Internal slots make this enclosure ideal for projects that will have multiple pc boards mounted internally.



  • Designed to house P.C. boards or for equipment interfacing.
  • Sized for standard Eurocards.
  • P.C.

$28.13
$25.32
You save: 10%
Click to read more
P-H1431-10XCover Plate - Hammond, Steel, 8" x 4", 20 Gauge
Colors Available:

Special Order Item

Hammond Mfg 20 gauge steel 8” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$5.06
$4.55
You save: 10%
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1441-9XChassis Box - Hammond, Steel, 8" x 4" x 1"
Colors Available:

Special Order Item

8 inch wide by 4 inch deep by 1 inch tall



  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).


Type Chassis Bottom Steel Grey P-H1441-9 P-H1431-9 Steel Black Satin P-H1441-9BK3 P-H1431-9BK3


$14.17
Starting at $12.75
You save: 10%
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1590BCEXChassis Box - Diecast Aluminum, 4.39" x 2.34" x 1.06"
Colors Available:

4.39" x 2.34" x 1.06" D. Equivalent to Hammond P-H1590B.


$5.95
Starting at $5.36
You save: 10%
Click to read more
P-H1590ACEChassis Box - Unpainted Aluminum, 3.64" x 1.52" x 1.06"

Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.


$5.61
$5.05
You save: 10%
Click to read more

Pages

(13 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Enclosures