You are here

Enclosures

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(12 pages)
P-H1451-30XChassis Cage - Hammond, Steel, 17" x 10" x 5.2"
Colors Available:

Special Order Item

  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.


For satin black version, see P-H1451-30BK3


$67.10
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-HHW1310XPLCover Plate - Hammond, Aluminum, 11.75" x 8.75"
Colors Available:

Special Order Item

Bottom panel for use with Hammond HWCHAS1310 Natural Aluminum. 11.75" W X 8.75" D


Starting at $11.62
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1431-38XCover Plate - Hammond, Steel, 17" x 10"
Colors Available:

Special Order Item

Cover for chassis box 17 inch wide by 14 inch deep. Finished in ASA 61 smooth grey or satin black powder paint. Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional ottom plates).
$20.24
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1441-38XChassis Box - Hammond, Steel, 17" x 14" x 3"
Colors Available:

Special Order Item

Chassis box 17 inch wide by 14 inch deep by 3 inch tall



  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).


Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3


$64.76
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1441-42XChassis Box - Hammond, Steel, 17" x 14" x 5"
Colors Available:

Special Order Item

Cover for chassis box 17 inch wide by 14 inch deep by 5 inch tall.

  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
$75.89
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1590DDCEChassis Box - Unpainted Aluminum, 7.38" x 4.70" x 1.30"
Diecast Aluminum Chassis Box, 7.4” x 4.7” x 1.3”. Six included machine screws secure lid.
$13.50
Click to read more
P-H1431-10XCover Plate - Hammond, Steel, 8" x 4", 20 Gauge
Colors Available:

Special Order Item

Hammond Mfg 20 gauge steel 8” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$5.06
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1590VChassis Box - Hammond, Unpainted Aluminum, 4.70" x 4.70" x 3.54"

Special Order Item

  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$23.15
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1590GChassis Box - Hammond, Unpainted Aluminum, 3.94" x 1.97" x 0.83"

Special Order Item

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
Vibra finished for a smooth surface with no sharp edges.
Four 6-32 x ½" machine screws secure lid - into tapped holes.
Designed to meet IP54.
Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$8.77
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1455L2201Chassis box - Hammond, Aluminum, 8.66" x 4.06" x 1.2"

Special Order Item

Hammond aluminum chassis box with end panels and curved, riveted sides.
$19.76
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more

Pages

(12 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Enclosures