You are here

Enclosures

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(15 pages)
P-H1590G2Chassis Box - Hammond, Unpainted Aluminum, 3.9" x 2.0" x 1.2"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$7.95
Click to read more
P-H1590DDCEChassis Box - Unpainted Aluminum, 7.38" x 4.70" x 1.30"
Diecast Aluminum Chassis Box, 7.4” x 4.7” x 1.3”. Six included machine screws secure lid.
$13.50
Click to read more
P-H1451-30Chassis Cage - Hammond, Steel, 17" x 10" x 5.2"

Special Order Item

  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.
For satin black version, see P-H1451-30BK3
$67.10
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-HWCHAS1310BKChassis Box - Hammond, Walnut/Black, 13" x 10" x 3"

Special Order Item

Walnut chassis with satin black powder paint finish aluminum top panel. Measures 13" x 10" x 3".
  • Heavy duty construction walnut chassis.
  • Top panel in satin black powder paint finish.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.
$102.07
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1431-29Cover Plate - Hammond, Steel, 12" x 10", 20 Gauge

Special Order Item

Hammond Mfg 20 gauge steel 12” x 10” cover plate.
  • Finished in ASA 61 smooth grey paint.
  • Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$14.17
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1441-29Chassis Box - Hammond, Steel, 12" x 10" x 2"

Special Order Item

Spot welded heavy duty construction chassis. 0.036 thick.
Does not include cover. please refer to P-H1431-29
$32.38
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1431-20Cover Plate - Hammond, Steel, 17" x 4", 20 Gauge

Special Order Item

20 gauge. Cover for chassis box 17 inch wide by 4 inch deep by 3 inch tall.



  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).


Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3


$8.09
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1444-12103Chassis Box - Hammond, Aluminum, 12" x 10" x 3"

Special Order Item

Aluminum chassis. 0.051" thick. Spot-welded heavy duty construction. See P-H1434-29 for cover


$29.34
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-H1590VChassis Box - Hammond, Unpainted Aluminum, 4.70" x 4.70" x 3.54"

Special Order Item

  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$23.15
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more
P-HHW1310BKPLCover Plate - Hammond, Black, 11.75" x 8.75"

Special Order Item

Bottom panel for use with Hammond HWCHAS1710
Satin Black.
11.75" W X 8.75" D
$18.90
Note: special order items require additional lead time. See our page on special order items.
Note: this is a special order item.
Click to read more

Pages

(15 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Enclosures