Enclosures / Chassis

Amp-top Enclosure - Hammond, 20 ga. Steel, 4" x 6" x 3"
High quality powder coated amp-top enclosures from Hammond’s 1454 Series. These cases are a great choice for amp top effects such as the Dallas Rangemaster. Features
  • Made of strong, economical 20 gauge steel.
  • Rugged powder coat finish: beige panels with textured black covers.
  • Choice of sloping or vertical front panels by reversing the case.
  • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.
$27.15
Chassis - Fender Style 5E3 Tweed Deluxe
Fender® style narrow panel Tweed Deluxe™(5E3) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 2
  • Chassis Dimensions: 14 1/2" x 4 1/8" x 2 5/8"

*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95
Chassis - Fender Style 5E3 Tweed Deluxe, Belton Socket Compatible
Fender® style narrow panel tweed Deluxe™(5E3) chassis. This chassis is compatible with the popular P-ST8-209MIP Belton octal sockets as well as with the Belton noval sockets such as P-ST9-700. The chrome plating has a polished mirror finish.
  • Chrome plated steel, .045" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 2
  • Chassis Dimensions: 370mm x 106mm x 69mm

*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95
Chassis - Fender Style 5F1 Tweed Champ
Fender® style Tweed Champ™(5F1) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 8-3/4" x 4-1/8" x 2 5/8"
$62.95
Chassis - Fender Style 5F1 Tweed Champ, Belton Socket Compatible
Fender® style tweed Champ™(5F1) chassis. This chassis is compatible with the popular P-ST8-209MIP Belton octal sockets as well as with the Belton noval sockets such as P-ST9-700. The chrome plating has a polished mirror finish.
  • Chrome plated steel, .045" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 8-¾" x 4-⅛" x 2 ⅝"
$62.95
Chassis - Fender Style 5F2 Tweed Princeton
Fender® style narrow panel Tweed Princeton™(5F2) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 13-3/4" x 4-1/8 x 2-1/2"
$75.95
Chassis - Fender Style 5F6A Tweed Bassman
Fender® style narrow panel Tweed Bassman™(5F6A) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 3
  • Chassis Dimensions: 20'' x 4 1/8'' x 2 5/8''
$79.95
Chassis - Marshall Style 18 Watt TMB
Marshall™ style 18 Watt TMB chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 9-Pin (miniature) socket holes: 6
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-1/8” x 2-1/2”
  • Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
  • Can cap mounting centers : 2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
$79.95
Chassis - Marshall Style 18 Watt Tremolo
Marshall™ style 18 Watt Tremolo chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 9-Pin (miniature) socket holes: 6
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-1/8” x 2-1/2”
  • Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
  • Can cap mounting centers : 2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
$85.95
Chassis - Marshall Style JTM-45 with front and back plates
Marshall™ style JTM45 chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 3
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-7/16” x 2-3/4”
  • Output transformer mounting centers: 2-1/2” x 2-3/8”
  • Choke mounting centers: (#1) 2-7/8” (#2) 3-3/16”
  • Can cap mounting centers : 2”
  • Octal (8-pin) tube sockets: 1-1/2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
  • Octal socket : P-ST8-600
  • Output transformer: P-T1750Q
  • Choke: P-C194G
$104.95
Chassis - Mod® Electronics, MK1 Fuzz, Pre-drilled, Folded 16 ga. Steel
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original MK1 Tone Bender enclosures and is pre-drilled to match the original layout of the MK1 pedal. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The MK1 fuzz enclosure features a removable bottom door for easy access to the battery. All required screws and rubber feet are included.
$49.95
Chassis - Mod® Electronics, Wedge Shaped Fuzz, Pre-drilled, Folded 20 ga. Steel
Pre-drilled wedge shaped pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original FZ-1 and FZ-1A Fuzz Tone enclosures but the predilled layout is inspired by the Octavio and the early Carlsbro fuzz. This provides a classic pedal design with a layout that is more compatible with modern pedalboards than the original Fuzz Tone layout. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The wedge shaped fuzz enclosure features a hinged bottom cover for easy access to the battery. The four screws that attach the bottom are included.
$36.95
Chassis - Mod®, Buzzaround, Pre-drilled, Hammered Dark Gray
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original Burns Buzzaround enclosures and is pre-drilled to match the original layout of the Buzzaround pedal. The hammered dark gray powder coat provides a close match for the original appearance but will hold up much better than the paint found on the vintage pedals.
$74.95
Chassis - Three Knob Fuzz, Pressed Steel
Pre-drilled three knob pedal enclosure made of pressed steel. This large enclosure is a close match to the original enclosures found on various vintage fuzz effects such as the Vox Tone Bender MKIII, Rotosound Fuzz, and Park Fuzz Sound. It features three holes for potentiometers, two top mounted holes for ⅜” jacks, and a footswitch hole. Comes with 4 rubber feet and a pack of mounting screws(packaged separately) for attaching the bottom plate.
  • Footswitch Hole Diameter: 0.492 in. (12.5mm)
  • Potentiometer Hole Diameter: 0.294 in. (7.47mm)
  • Jack Hole Diameter: 0.447 in. (11.35mm)
$19.95
Chassis Box - 1032L, Diecast, Looper, 10" x 2.75" x 1.89"
Extra long diecast aluminum chassis commonly used for looper/loop-switching pedals. This enclosure style is often referred to as the 1032L. Mounting screws for the bottom plate are included with this chassis box. Add 0.16" to enclosure depth for lid.
$10.99
Chassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.
Starting at $6.29
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.
Starting at $5.95
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Blue
Limited Run!
1590B diecast enclosure finished in a hammered blue powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered blue powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU C65 (Gorva) P-H1590N1-GORVA-HMT-BLU S90 (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$14.95
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Bronze
Limited Run!
1590B diecast enclosure finished in a hammered bronze powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered bronze powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.95
Out of Stock
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Green
Limited Run!
1590B diecast enclosure finished in a hammered green powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Silver
Limited Run!
1590B diecast enclosure finished in a hammered silver powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered silver powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid
$14.95
Out of Stock
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
Chassis box perfectly suited for effects pedals and other DIY projects.
Starting at $5.40
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Bronze
Limited Run!
1590BB diecast enclosure finished in a hammered bronze powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered bronze powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.95
Out of Stock
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Green
Limited Run!
1590BB diecast enclosure finished in a hammered green powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock