Enclosures / Chassis

Hammond

Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Package of 4
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
$0.79
Cover Plate - Hammond, Aluminum, 13" x 7", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1372
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$8.60
Rack-mounted Enclosure - Hammond, 1U, half-width
1 rack unit tall, extruded aluminum, 8.5" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, and all assembly hardware
  • Manufactured in North America.
Starting at $104.70
Chassis Box - Hammond, Aluminum, 12" x 8" x 2"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-22
$26.03
Chassis Box - Hammond, 12" x 13" x 2", 1444-17132
Special Order Item
Hammond natural aluminum chassis box. Measures 17" x 13" x 2".
$35.94
Note: special order items require additional lead time. See our page on special order items.
Cover Plate - Hammond, Aluminum, 12" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-22 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$10.05
Chassis Box - Hammond, Aluminum, 12" x 8" x 3"
Hammond Chassis Box, Aluminum, 12 in. x 8 in. x 3 in. Spot-welded heavy duty construction, natural finish. See P-H1434-22 for cover.
$26.94
Chassis Box - Hammond, 1590N1, Diecast, 4.77" x 2.58" x 1.41"
Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Add 0.16" to enclosure depth for lid.
$10.81
Chassis Box - Hammond, Steel, 8" x 4" x 1"
Colors Available:
Special Order Item
8 inch wide by 4 inch deep by 1 inch tall
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-9 P-H1431-9 Steel Black Satin P-H1441-9BK3 P-H1431-9BK3
$12.73
Out of Stock
Cover Plate - Hammond, Aluminum, 10" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1053
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$4.77
Rack-mounted Enclosure - Hammond, 2U, half-width
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, and all assembly hardware
  • Manufactured in North America.
Starting at $111.79
Chassis Box - Hammond, Aluminum, 12" x 10" x 2"
Hammond Chassis Box, Aluminum, 12 in. x 10 in. x 2 in. Spot-welded heavy duty construction, natural finish. See P-H1434-29 for cover.
$26.94
Chassis Box - Hammond, 12" x 8" x 3", Wood Sides
Hammond aluminum chassis box with walnut sides. Measures 12" by 8" by 3".
$76.76
Cover Plate - Hammond, Aluminum, 17" x 10", 20 Gauge
20 gauge bottom chassis plate Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$11.31
Chassis Cage - Hammond, Steel, 10" x 12" x 5.2", Black
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • Satin black baked enamel finish.
  • Four self-tapping screws included.
$50.89
Chassis Box - Hammond, 1590X, Diecast, 5.72" x 4.77" x 2.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$14.34
Chassis Box - Hammond, Aluminum, 12" x 8" x 2.5"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$24.57
Out of Stock
Chassis Box - Hammond, Aluminum, 17" x 4" x 3", Utility, Gray
Special Order Item
Hammon utility enclosure, 0.04" thick aluminum. 17 inch length by 4 inch width by 3 inch height. Features:
  • Four self-tapping screws included
  • ASA 61 grey baked powder paint
$27.49
Note: special order items require additional lead time. See our page on special order items.
Rack-mounted Enclosure - Hammond, 3U, half-width
3 rack unit tall, extruded aluminum, 8.5" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, and all assembly hardware
  • Manufactured in North America.
Starting at $118.71
Chassis Box - Hammond, Aluminum, 6" x 4" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:
  • Spot-welded heavy duty construction
  • Natural finish

Does not include cover. See P-H1434-8
$10.77
Chassis Box - Hammond, Extruded Aluminum, 8.66" x 4.06" x 2.09"
Hammond extruded aluminum enclosure, blue anodized finish. This genuine Hammond enclosure is great for a wide variety of projects from effects pedals to small preamp/compressor builds. Internal slots make this enclosure ideal for projects that will have multiple pc boards mounted internally.
  • Designed to house P.C. boards or for equipment interfacing.
  • Sized for standard Eurocards.
  • P.C.
$29.93
Chassis Box - Hammond, Steel, 7" x 5" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-12 or P-H1431-12BK3
Starting at $12.56
Chassis Box - Hammond, Steel, 12" x 8" x 3", Walnut Side Panels
Special Order Item
12" wide x 8" long x 3" tall steel chassis and bottom plate with walnut side panels Features:
  • Spot welded steel (20 gauge) - heavy duty construction chassis.
  • Steel chassis is finished in satin black powder paint
  • Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
  • Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.
$75.70
Note: special order items require additional lead time. See our page on special order items.
Chassis Box - Hammond, Walnut / Aluminum, 13" x 10" x 3"
Colors Available:
Special Order Item
Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".
  • Heavy duty construction walnut chassis.
  • Top panel in natural aluminium.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.
Starting at $86.89
Partially Out of Stock
Note: special order items require additional lead time. See our page on special order items.