Enclosures / Chassis

Hammond

Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
P-H1590TRPB-HMT-BLU Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54", Hammered Blue
Limited Run!
Short trapezoid shaped Hammond enclosure in a hammered blue powdercoat. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
  • Hammered blue powdercoat
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$24.95
Out of Stock
P-H1434-137 Cover Plate - Hammond, Aluminum, 13" x 7", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1372
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$10.90
P-HRM-2U-08 Rack-mounted Enclosure - Hammond, 2U, half-width
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, and all assembly hardware
  • Manufactured in North America.
Starting at $139.92
P-H1444-22 Chassis Box - Hammond, Aluminum, 12" x 8" x 2"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-22
$35.10
P-H1444-24CWW Chassis Box - Hammond, 12" x 8" x 3", Wood Sides
Special Order Item
Hammond aluminum chassis box with walnut sides. Measures 12" by 8" by 3".
$137.25
Out of Stock
P-H1434-22 Cover Plate - Hammond, Aluminum, 12" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-22 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$13.55
P-H1444-28 Chassis Box - Hammond, Aluminum, 16" x 8" x 3"
Hammond Chassis Box, Aluminum, 16 in. x 8 in. x 3 in. Spot-welded heavy duty construction, natural finish. See P-H1434-26 for cover.
$43.00
P-H1591CTCL Chassis Box - Hammond, 1591CTCL, Crystal Clear, Polycarbonate, 4.70 x 2.60 x 1.40"
1591T Series enclosure made of clear polycarbonate. The 1591C is a similar size to the 1590N1 / 125B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.
  • Ideally suited for mounting printed circuit boards.
  • Perfect for applications where parts, sensors or indicators need to be visible.
  • Crystal Clear version is almost totally transparent.
  • Integral card guides accept 1.5 mm (0.062”) P.C. cards.
  • Lap joint construction provides protection against access of dust and splashing water.
  • Designed to meet IP54.
  • Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
  • Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.
$10.95
P-H1590N1 Chassis Box - Hammond, 1590N1, Diecast, 4.77" x 2.58" x 1.41"
Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Add 0.16" to enclosure depth for lid.
$12.50
P-H1444-12825 Chassis Box - Hammond, Aluminum, 12" x 8" x 2.5"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$31.63
Out of Stock
P-H1434-105 Cover Plate - Hammond, Aluminum, 10" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1053
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$6.05
P-HRM-3U-08 Rack-mounted Enclosure - Hammond, 3U, half-width
3 rack unit tall, extruded aluminum, 8.5" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, and all assembly hardware
  • Manufactured in North America.
Starting at $148.58
P-H1444-29 Chassis Box - Hammond, Aluminum, 12" x 10" x 2"
Hammond Chassis Box, Aluminum, 12 in. x 10 in. x 2 in. Spot-welded heavy duty construction, natural finish. See P-H1434-29 for cover.
$36.35
P-H1455N2201BU Chassis Box - Hammond, Extruded Aluminum, 8.66" x 4.06" x 2.09"
Hammond extruded aluminum enclosure, blue anodized finish. This genuine Hammond enclosure is great for a wide variety of projects from effects pedals to small preamp/compressor builds. Internal slots make this enclosure ideal for projects that will have multiple pc boards mounted internally.
  • Designed to house P.C. boards or for equipment interfacing.
  • Sized for standard Eurocards.
  • P.C.
$36.90
P-H1434-30 Cover Plate - Hammond, Aluminum, 17" x 10", 20 Gauge
20 gauge bottom chassis plate Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$15.30
P-H1456KE3BKBU Chassis Box - Hammond, Aluminum, 10" x 5.5" x 3" to 1.1", Sloped
Special Order Item
Hammond black top and blue case sloped aluminum console. 10 inches wide by 5.5 inch depth. Front of console is 1.1 inches high and rear is 3 inches high. Features:
  • Aluminum cases 0.081" thick aluminum
  • Pre-assembled with a textured blue case and a black top panel.
  • Comes with self adhesive rubber feet and required mounting hardware
$40.67
Out of Stock
P-H1590Y Chassis Box - Hammond, 1590Y, Diecast, 3.62” x 3.62” x 1.50”
Square 3.62” x 3.62” x 1.50” Hammond 1590Y enclosure. This enclosure is a stylish option for builds offering a similar amount of space as a 1950BB enclosure.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$11.95
P-H1590X Chassis Box - Hammond, 1590X, Diecast, 5.72" x 4.77" x 2.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$17.40
P-H1434-86 Cover Plate - Hammond, Aluminum, 8" x 6"
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$9.10
P-H1411ZU Chassis Box - Hammond, Aluminum, 17" x 4" x 3", Utility, Gray
Special Order Item
Hammond utility enclosure, 0.04" thick aluminum. 17 inch length by 4 inch width by 3 inch height. Features:
  • Four self-tapping screws included
  • ASA 61 grey baked powder paint
$35.38
Out of Stock
P-HRM-4U-19 Rack-mounted Enclosure - Hammond, 4U, full-width
4 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
  • Manufactured in North America.
Starting at $259.88
P-H1444-8 Chassis Box - Hammond, Aluminum, 6" x 4" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:
  • Spot-welded heavy duty construction
  • Natural finish

Does not include cover. See P-H1434-8
$14.50
P-H1590B3 Chassis Box - Hammond, 1590B3, Diecast, 4.57" x 3.03" x 1.32"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$10.80
P-H1441-12X Chassis Box - Hammond, Steel, 7" x 5" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-12 or P-H1431-12BK3
Starting at $16.45