Enclosures / Chassis
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06"
4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.
Colors Available:
Add 0.16" to enclosure depth for lid.
Starting at $5.95
Chassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.38"
The Gorva S90 is a high quality powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design. Features:
Colors Available:
- Beveled top and rounded corners for high quality look.
- Tight fit and small gap between the enclosure and lid.
- Undercut boss allows more internal room for more flexible layout.
- Smooth, eggshell-like matte powder coating.
- Add 0.16" to enclosure depth for lid.
Starting at $10.95
Cover Plate - Hammond, Steel, 6" x 4", 20 Gauge
Hammond Mfg 20 gauge steel 6” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $5.35
Chassis Box - Hammond, Walnut / Black Aluminum, 17" x 10" x 3"
Special Order Item
Walnut chassis with black aluminum top panel, measures 17 inches by 10 inches by 3 inches Features:- Heavy duty construction walnut chassis
- Top panel available in satin black powder paint finish.
- Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing & dovetail construction methods. Designed to handle heavy components.
- Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick.
$316.67
Chassis Box - Hammond, 1590LB, Diecast, 1.99" x 1.99" x 1.06"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $7.45
Chassis Box - GØRVA Design, M45, Diecast, 3.94" x 1.77" x 1.38"
The Gorva Design M45 enclosure has similar dimensions to 1590A but a bit larger for practical use. It measures 100mm [3.94"] x 45mm [1.77"] x 35 mm [1.38"]. The extended dimensions allow for easier builds and top mounted jacks. Features:
Colors Available:
- Slightly beveled top and rounded corners for a high quality look.
- Tight fit and small gap between the enclosure and lid.
- Undercut boss allows more internal room for a more flexible layout.
- Smooth, eggshell-like matte powder coating.
- Recessed bottom lid
Starting at $11.95
Chassis Box - Hammond, Steel, 10" x 6" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See or P-H1431-16BK3
Colors Available:
$23.00
Chassis Box - Hammond, Steel, 12" x 8" x 3"
Hammond Chassis Box, Steel, 12 in. x 8 in. x 3 in.
Colors Available:
- Spot welded heavy duty construction chassis.
- 0.036"" thick.
- Dimensions shown are exterior dimensions.
- Does not include cover. See P-H1431-22 Key
Starting at $37.48
Chassis Box - YY, Diecast, Slanted, 4.65" x 3.70" x 1.66"
Slanted YY enclosures perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features
Colors Available:
- Vintage style slant
- Flat top-section for mounting controls
- Recessed lid
- Thick diecast construction
Starting at $23.95
Chassis Box - Hammond, Walnut / Aluminum, 13" x 10" x 3"
Colors Available:
Special Order Item
Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".- Heavy duty construction walnut chassis.
- Top panel in natural aluminium.
- Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
- Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
- Includes four large round rubber feet (0.75" dia.
Starting at $266.67
Chassis Box - Hammond, Steel, 17" x 4" x 3"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Chassis box 17 inch wide by 4 inch deep by 3 inch tall.
Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3
Colors Available:
- Spot welded steel - heavy duty construction chassis.
- Finished in ASA 61 smooth grey or satin black powder paint
- Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3
Starting at $38.65
Cover Plate - Hammond, Steel, 8" x 4", 20 Gauge
Colors Available:
Special Order Item
Hammond Mfg 20 gauge steel 8” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$5.83
Chassis Box - Hammond, 1456, 15° Aluminum, 4" x 5.5" x 2"
15° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
Colors Available:
- 4" x 5.5" x 2" (1” height at front)
- Bottom panels are 0.081” (2 mm) thick aluminum
- Top panels are 0.064” thick aluminum
- Fully Powder Coated
- Comes with self adhesive rubber feet and required mounting hardware.
$30.90
Cover Plate - Hammond, Steel, 12" x 10", 20 Gauge
Hammond Mfg 20 gauge steel 12” x 10” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $16.40
Chassis Box - Hammond, Steel, 16" x 8" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-26
Colors Available:
$40.00
Chassis Box - Hammond, Steel, 8" x 4" x 2"
Colors Available:
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$16.40
Chassis Box - Hammond, 1456, 15° Aluminum/Wood, 4" x 5.5" x 2"
15° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes.
Features:
Colors Available:
Features:
- 4" x 5.5" x 2" (1” height at front)
- Top panels are 0.064” thick aluminum
- Powder coated top and bottom
- Wood sides are real walnut - each piece has a unique color & grain.
- Solid oiled walnut sides on a black, ventilated steel base.
- Comes with self adhesive rubber feet and required mounting hardware.
Starting at $59.95
Chassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.
Colors Available:
Starting at $6.29
Chassis Box - Hammond, Steel, 6" x 4" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-8 or P-H1431-8BK3
Colors Available:
$15.75
Rack-mounted Enclosure - Hammond, 1U, full-width
1 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
- Strong construction, yet light weight using all aluminum components
- Suitable for desk top or rack-mountable applications.
- Knockdown design ships un-assembled for easy handling and shipping protection.
- Strong construction using:
- extruded aluminum side panels 0.125" (3.2 mm) thick
- extruded aluminum front & rear panels 0.125" (3.2mm) thick
- flat aluminum top and bottom panels 0.064" (1.6 mm) thick
- Can be used with or without rack mounting brackets (one pair included)
- Front & rear panel are interchangeable.
- Enclosure is finished in rugged, textured, black powder coat.
- Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
- Manufactured in North America.
Starting at $165.88
Cover Plate - Hammond, Steel, 7" x 5", 20 Gauge
Hammond Mfg 20 gauge steel 7” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $5.95
Chassis Box - Hammond, Steel, 17" x 10" x 2"
Type Chassis Bottom Steel Grey P-H1441-30 P-H1431-30 Steel Black Satin P-H1431-30BK3
Colors Available:
Special Order Item
17 inch wide by 10 inch deep by 2 inches tall- Spot welded steel - heavy duty construction chassis.
- Finished in ASA 61 smooth grey
- Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
Type Chassis Bottom Steel Grey P-H1441-30 P-H1431-30 Steel Black Satin P-H1431-30BK3
$43.93
Chassis Cage - Hammond, Steel, 16" x 8" x 5.2"
Colors Available:
- Dimensions shown are exterior dimensions.
- For use with the P-H1441 and P-H1444 series chassis.
- Four self-tapping screws included.
$69.25
Rack-mounted Enclosure - Hammond, 2U, full-width
2 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
- Strong construction, yet light weight using all aluminum components
- Suitable for desk top or rack-mountable applications.
- Knockdown design ships un-assembled for easy handling and shipping protection.
- Strong construction using:
- extruded aluminum side panels 0.125" (3.2 mm) thick
- extruded aluminum front & rear panels 0.125" (3.2mm) thick
- flat aluminum top and bottom panels 0.064" (1.6 mm) thick
- Can be used with or without rack mounting brackets (one pair included)
- Front & rear panel are interchangeable.
- Enclosure is finished in rugged, textured, black powder coat.
- Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
- Manufactured in North America.
Starting at $197.75