You are here

Enclosures

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(15 pages)
P-H1590G2Chassis Box - Hammond, Unpainted Aluminum, 3.9" x 2.0" x 1.2"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$7.57
Click to read more
P-H1590BB2Chassis Box - Hammond, Unpainted Aluminum, 4.7" x 3.7" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$9.63
Click to read more
P-H1590B3Chassis Box - Hammond, Unpainted Aluminum, 4.6" x 3.0" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$8.47
Click to read more
P-H1590B2Chassis Box - Hammond, Unpainted Aluminum, 4.4" x 2.3" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$7.35
Click to read more
P-HCH06Chassis - Marshall Style JTM-45

Marshall™ style JTM45 chassis w/ front and back plates



  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 3
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"


Chassis Measurements:



  • Power transformer mounting centers: 3-7/16” x 2-3/4”
  • Output transformer mounting centers: 2-1/2” x 2-3/8”
  • Choke mounting centers: (#1) 2-7/8” (#2) 3-3/16”
  • Can cap mounting centers : 2”
  • Octal (8-pin) tube sockets: 1-1/2”
  • Noval (9-pin) tube sockets: 1-1/8”


Compatible Part Links:



  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
  • Octal socket : P-ST8-600
  • Output transformer: P-T1750Q
  • Choke: P-C194G

$71.00
Click to read more
P-HCH07Chassis - Marshall Style 18 Watt TMB

Marshall™ style 18 Watt TMB chassis w/ front and back plates



  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 9-Pin (miniature) socket holes: 6
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"


Chassis Measurements:



  • Power transformer mounting centers: 3-1/8” x 2-1/2”
  • Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
  • Can cap mounting centers : 2”
  • Noval (9-pin) tube sockets: 1-1/8”


Compatible Part Links:



  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600

$71.00
Click to read more
P-HCH02Chassis - Fender Style 5E3 Tweed Deluxe

Fender® style narrow panel Tweed Deluxe™(5E3) chassis.



  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 2
  • Chassis Dimensions: 14 1/2" x 4 1/8" x 2 5/8"


*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”


$55.00
Click to read more
P-HCH08Chassis - Marshall Style 18 Watt Tremolo

Marshall™ style 18 Watt Tremolo chassis w/ front and back plates



  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 9-Pin (miniature) socket holes: 6
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"


Chassis Measurements:



  • Power transformer mounting centers: 3-1/8” x 2-1/2”
  • Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
  • Can cap mounting centers : 2”
  • Noval (9-pin) tube sockets: 1-1/8”


Compatible Part Links:



  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600

$71.00
On Backorder
Click to read more
P-HCH03Chassis - Fender Style 5F2 Tweed Princeton

Fender® style narrow panel Tweed Princeton™(5F2) chassis.



  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 13-3/4" x 4-1/8 x 2-1/2"

$50.00
Click to read more
P-HCH04Chassis - Fender Style 5F6A Tweed Bassman

Fender® style narrow panel Tweed Bassman™(5F6A) chassis.



  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 3
  • Chassis Dimensions: 20'' x 4 1/8'' x 2 5/8''

$60.00
On Backorder
Click to read more

Pages

(15 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Enclosures