You are here

Enclosures

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(15 pages)
P-HWAHEnclosure - Wah Pedal Shell and Hardware
Wah pedal enclosure, bottom, and foot-pedal shell and hardware
$40.00
Click to read more about this product.
P-H1434-137Cover Plate - Hammond, Aluminum, 13" x 7", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1372
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$7.46
Click to read more about this product.
P-H1444-1053Chassis Box - Hammond, Aluminum, 10" x 5" x 3"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-105
$15.75
Click to read more about this product.
P-H1434-105Cover Plate - Hammond, Aluminum, 10" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1053
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$4.14
Click to read more about this product.
P-H1431-20Cover Plate - Hammond, Steel, 17" x 4", 20 Gauge

20 gauge. Cover for chassis box 17 inch wide by 4 inch deep by 3 inch tall.



  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).


Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3


$7.84
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more about this product.
P-H1441-8Chassis Box - Hammond, Steel, 6" x 4" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions.
Does not include cover. See P-H1431-8 or P-H1431-8BK3
$12.73
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more about this product.
P-H1451-30Chassis Cage - Hammond, Steel, 17" x 10" x 5.2"
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.
For satin black version, see P-H1451-30BK3
$64.95
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more about this product.
P-H1590VChassis Box - Hammond, Unpainted Aluminum, 4.70" x 4.70" x 3.54"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$22.41
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more about this product.
P-HWCHAS1310ALChassis Box - Hammond, Walnut/Aluminum, 13" x 10" x 3"
Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".
  • Heavy duty construction walnut chassis.
  • Top panel in natural aluminium.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.
$91.76
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more about this product.
P-HWCHAS1310BKChassis Box - Hammond, Walnut/Black, 13" x 10" x 3"
Walnut chassis with satin black powder paint finish aluminum top panel. Measures 13" x 10" x 3".
  • Heavy duty construction walnut chassis.
  • Top panel in satin black powder paint finish.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.
$98.81
Special Order Item
Please Contact us or call us at 480.820.5411 to order this item.
Click to read more about this product.

Pages

(15 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Enclosures