Enclosures / Chassis

P-H1590BBCE-X Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
Chassis box perfectly suited for effects pedals and other DIY projects.
Starting at $5.40
P-H1590BCEX Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.
Starting at $5.95
P-H1590LBCE Chassis Box - 1590LB, Diecast, 1.99″ x 1.99″ x 1.22″
1.99″ x 1.99″ x 1.22″ (51mm x 51mm x 31mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590LBX enclosure. This enclosure is great for tap tempos and other utility pedals.
$3.95
P-H1590N1CE-X Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41"
Colors Available:
Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Measures 4.77" x 2.58" x 1.41". Add 0.16" to enclosure depth for lid.
Starting at $6.95
P-H1590XXCE Chassis Box - 1590XX, Diecast, 5.72" x 4.77" x 1.55"
5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.
$8.80
P-H1590ACE-X Chassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.
Starting at $6.29
P-H1590MS-X Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
Starting at $1.35
package of 4
P-HROTO-1 Chassis - Three Knob Fuzz, Pressed Steel
Pre-drilled three knob pedal enclosure made of pressed steel. This large enclosure is a close match to the original enclosures found on various vintage fuzz effects such as the Vox Tone Bender MKIII, Rotosound Fuzz, and Park Fuzz Sound. It features three holes for potentiometers, two top mounted holes for ⅜” jacks, and a footswitch hole. Comes with 4 rubber feet and a pack of mounting screws(packaged separately) for attaching the bottom plate.
  • Footswitch Hole Diameter: 0.492 in. (12.5mm)
  • Potentiometer Hole Diameter: 0.294 in. (7.47mm)
  • Jack Hole Diameter: 0.447 in. (11.35mm)
$19.95
P-H1590BX Chassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $8.75
P-H1590N1-GORVA-X Chassis Box - GØRVA Design, C65, Diecast, 4.72” x 2.56” x 1.54”
Colors Available:
The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:
  • Slightly beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Recessed bottom lid
Starting at $10.45
P-H1590TRPB-X Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54"
Colors Available:
Short trapezoid shaped Hammond enclosure. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Starting at $10.95
P-H1590CCE Chassis Box - 1590C, Diecast, 4.72" x 3.70" x 2.10"
4.72" x 3.70" x 2.1" (119mm x 94mm x 56mm) diecast aluminum enclosure. Equivalent to the Hammond 1590C enclosure. This enclosure is a taller version of the 1590BB allowing for more vertical space for larger projects.
$7.95
P-H1590BBX Chassis Box - Hammond, 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $10.95
P-H1444-16 Chassis Box - Hammond, Aluminum, 10" x 6" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:
  • Spot-welded heavy duty construction
  • Natural finish

Does not include cover. See P-H1434-16
$18.95
P-H1590J-X Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Colors Available:
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
Starting at $13.95
P-H1590BB-GORVA-X Chassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.38"
Colors Available:
The Gorva S90 is a high quality powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design. Features:
  • Beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Add 0.16" to enclosure depth for lid.
Starting at $10.95
P-H-YY-X Chassis Box - YY, Diecast, Slanted, 4.65" x 3.70" x 1.66"
Colors Available:
Slanted YY enclosures perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features
  • Vintage style slant
  • Flat top-section for mounting controls
  • Recessed lid
  • Thick diecast construction
Starting at $23.95
P-H-YY-HMT-BLU Chassis Box - YY, Diecast, Slanted, 4.65" x 3.70" x 1.66", Hammered Blue
Limited Run!
YY enclosure finished in a hammered blue powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features
  • Vintage style slant
  • Hammered blue powdercoat
  • Flat top-section for mounting controls
  • Recessed lid
  • Thick diecast construction

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU 1590N1 (Gorva) P-H1590N1-GORVA-HMT-BLU 1590BB (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$35.95
Out of Stock
P-H1590N1CE-HMT-BLU Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41", Hammered Blue
Limited Run!
1590N1 / 125B diecast enclosure finished in a hammered blue powdercoat. Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
  • 4.77" x 2.58" x 1.41"
  • Hammered blue powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590N1
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU 1590N1 (Gorva) P-H1590N1-GORVA-HMT-BLU 1590BB (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$14.75
Out of Stock
P-HWAH Enclosure - Wah Pedal Shell and Hardware
Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.
$40.00
P-H1590BB-GORVA-HMT-BLU Chassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.38", Hammered Blue
Limited Run!
The Gorva S90 is a high quality hammered blue powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design.
Features:
  • Hammered Blue powdercoat
  • Beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU C65 (Gorva) P-H1590N1-GORVA-HMT-BLU S90 (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$18.95
Out of Stock
P-H1590BB2 Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$11.95
P-H1431-22X Cover Plate - Hammond, Steel, 12" x 8", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Starting at $12.95
P-H-M45-GORVA-X Chassis Box - GØRVA Design, M45, Diecast, 3.94" x 1.77" x 1.38"
Colors Available:
The Gorva Design M45 enclosure has similar dimensions to 1590A but a bit larger for practical use. It measures 100mm [3.94"] x 45mm [1.77"] x 35 mm [1.38"]. The extended dimensions allow for easier builds and top mounted jacks. Features:
  • Slightly beveled top and rounded corners for a high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for a more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Recessed bottom lid
Starting at $10.55