 | Chassis Box - Hammond, Unpainted Aluminum, 3.9" x 2.0" x 1.2"- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
| $7.95 $7.08 You save: 11% | Click to read more |
 | Chassis Box - Hammond, Unpainted Aluminum, 4.7" x 3.7" x 1.5"- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
| $10.12 $9.01 You save: 11% | Click to read more |
 | Chassis Box - Hammond, Unpainted Aluminum, 4.6" x 3.0" x 1.5"- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
| $8.90 $7.92 You save: 11% | Click to read more |
 | Chassis Box - Hammond, Unpainted Aluminum, 4.4" x 2.3" x 1.5"- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
| $7.73 $6.88 You save: 11% | Click to read more |
 | Chassis - Marshall Style JTM-45Marshall™ style JTM45 chassis w/ front and back plates
- Brushed aluminum chassis, .07" thick.
- Gold “plexi” style front and back plates
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 3
- Capacitor mounting holes:1
- Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"
Chassis Measurements:
- Power transformer mounting centers: 3-7/16” x 2-3/4”
- Output transformer mounting centers: 2-1/2” x 2-3/8”
- Choke mounting centers: (#1) 2-7/8” (#2) 3-3/16”
- Can cap mounting centers : 2”
- Octal (8-pin) tube sockets: 1-1/2”
- Noval (9-pin) tube sockets: 1-1/8”
Compatible Part Links:
- Noval socket with shield base: P-ST9-700
- Noval socket (no shield): P-ST9-600
- Octal socket : P-ST8-600
- Output transformer: P-T1750Q
- Choke: P-C194G
| $88.47 $78.74 You save: 11% | Click to read more |
 | Chassis - Marshall Style 18 Watt TMBMarshall™ style 18 Watt TMB chassis w/ front and back plates
- Brushed aluminum chassis, .07" thick.
- Gold “plexi” style front and back plates
- 9-Pin (miniature) socket holes: 6
- Capacitor mounting holes:1
- Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"
Chassis Measurements:
- Power transformer mounting centers: 3-1/8” x 2-1/2”
- Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
- Can cap mounting centers : 2”
- Noval (9-pin) tube sockets: 1-1/8”
Compatible Part Links:
- Noval socket with shield base: P-ST9-700
- Noval socket (no shield): P-ST9-600
| $88.47 $78.74 You save: 11% | Click to read more |
 | Chassis - Fender Style 5E3 Tweed DeluxeFender® style narrow panel Tweed Deluxe™(5E3) chassis.
- Chrome plated steel, .06" thick.
- Screened white lettering
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 2
- Chassis Dimensions: 14 1/2" x 4 1/8" x 2 5/8"
*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
| $68.53 $60.99 You save: 11% | Click to read more |
 | Chassis - Marshall Style 18 Watt TremoloMarshall™ style 18 Watt Tremolo chassis w/ front and back plates
- Brushed aluminum chassis, .07" thick.
- Gold “plexi” style front and back plates
- 9-Pin (miniature) socket holes: 6
- Capacitor mounting holes:1
- Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"
Chassis Measurements:
- Power transformer mounting centers: 3-1/8” x 2-1/2”
- Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
- Can cap mounting centers : 2”
- Noval (9-pin) tube sockets: 1-1/8”
Compatible Part Links:
- Noval socket with shield base: P-ST9-700
- Noval socket (no shield): P-ST9-600
| $88.47 $78.74 You save: 11% | Click to read more |
 | Chassis - Fender Style 5F2 Tweed PrincetonFender® style narrow panel Tweed Princeton™(5F2) chassis.
- Chrome plated steel, .06" thick.
- Screened white lettering
- 8-Pin (Octal) socket holes: 2
- 9-Pin (miniature) socket holes: 1
- Chassis Dimensions: 13-3/4" x 4-1/8 x 2-1/2"
| $62.30 $55.45 You save: 11% | Click to read more |
 | Chassis - Fender Style 5F6A Tweed BassmanFender® style narrow panel Tweed Bassman™(5F6A) chassis.
- Chrome plated steel, .06" thick.
- Screened white lettering
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 3
- Chassis Dimensions: 20'' x 4 1/8'' x 2 5/8''
| $74.76 $66.54 You save: 11% | Click to read more |
480.820.5411