Enclosures / Chassis

P-H1590BBCE-X Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
Chassis box perfectly suited for effects pedals and other DIY projects.
Starting at $5.95
P-H1590LBCE Chassis Box - 1590LB, Diecast, 1.99″ x 1.99″ x 1.22″
1.99″ x 1.99″ x 1.22″ (51mm x 51mm x 31mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590LBX enclosure. This enclosure is great for tap tempos and other utility pedals.
$3.95
P-H1590BCEX Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.
Starting at $5.95
P-H1590N1CE-X Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41"
Colors Available:
Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Measures 4.77" x 2.58" x 1.41". Add 0.16" to enclosure depth for lid.
Starting at $7.25
P-H1590XXCE Chassis Box - 1590XX, Diecast, 5.72" x 4.77" x 1.55"
5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.
$8.80
P-H1590TRPB-X Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54"
Colors Available:
Short trapezoid shaped Hammond enclosure. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Starting at $8.76
Save 20%
Originally: $10.95
P-HROTO-1 Chassis - Three Knob Fuzz, Pressed Steel
Pre-drilled three knob pedal enclosure made of pressed steel. This large enclosure is a close match to the original enclosures found on various vintage fuzz effects such as the Vox Tone Bender MKIII, Rotosound Fuzz, and Park Fuzz Sound. It features three holes for potentiometers, two top mounted holes for ⅜” jacks, and a footswitch hole. Comes with 4 rubber feet and a pack of mounting screws(packaged separately) for attaching the bottom plate.
  • Footswitch Hole Diameter: 0.492 in. (12.5mm)
  • Potentiometer Hole Diameter: 0.294 in. (7.47mm)
  • Jack Hole Diameter: 0.447 in. (11.35mm)
$19.95
P-H1590BX Chassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $7.00
Save 20%
Originally: $8.75
P-H1590N1-GORVA-X Chassis Box - GØRVA Design, C65, Diecast, 4.72” x 2.56” x 1.54”
Colors Available:
The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:
  • Slightly beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Recessed bottom lid
Starting at $10.45
P-H1590J-X Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Colors Available:
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
Starting at $11.16
Save 20%
Originally: $13.95
P-H1590ACE-X Chassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.
Starting at $6.29
P-H1590MS-X Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
Starting at $1.08
Save 20%
Originally: $1.35
package of 4
P-H1590BB-GORVA-X Chassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.38"
Colors Available:
The Gorva S90 is a high quality powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design. Features:
  • Beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Add 0.16" to enclosure depth for lid.
Starting at $10.95
P-H1590BBX Chassis Box - Hammond, 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $8.76
Save 20%
Originally: $10.95
P-H1444-16 Chassis Box - Hammond, Aluminum, 10" x 6" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:
  • Spot-welded heavy duty construction
  • Natural finish

Does not include cover. See P-H1434-16
$15.16
Save 20%
Originally: $18.95
P-H1431-22X Cover Plate - Hammond, Steel, 12" x 8", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Starting at $10.36
Save 20%
Originally: $12.95
P-H1590BB2 Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$9.56
Save 20%
Originally: $11.95
P-HWAH Enclosure - Wah Pedal Shell and Hardware
Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.
$40.00
P-HCH02-B Chassis - Fender Style 5E3 Tweed Deluxe, Belton Socket Compatible
Fender® style narrow panel tweed Deluxe™(5E3) chassis. This chassis is compatible with the popular P-ST8-209MIP Belton octal sockets as well as with the Belton noval sockets such as P-ST9-700. The chrome plating has a polished mirror finish.
  • Chrome plated steel, .045" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 2
  • Chassis Dimensions: 370mm x 106mm x 69mm

*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$79.95
P-H1590XX Chassis Box - Hammond, 1590XX, Diecast, 5.72" x 4.77" x 1.39"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$11.96
Save 20%
Originally: $14.95
P-H1590BBX-PD2 Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Predrilled
Colors Available:
Predrilled 1590BB enclosures. Measures 4.71" x 3.70" x 1.18" deep. These enclosures come drilled with holes for pots, footswitch and top mounted jacks.
  • Standard size footswitch mounting hole fits 12mm or 15/32” bushings
  • ⅜” mounting holes for top mounted jacks
  • Enclosed or low profile ¼” jacks recommended
  • Top mounted DC jack mounting hole fits common switched jacks such as S-H750-X and P-JBLB-IN-S
  • 8mm potentiometer mounting holes fit a variety of different pot sizes but 16mm pots are recommended.
Starting at $9.95
P-H1590DDCE Chassis Box - 1590DD, Diecast, 7.40" x 4.72" x 1.30"
Diecast Aluminum Chassis Box, 7.40" x 4.72" x 1.30". Six included machine screws secure lid. Add 0.16" to enclosure depth for lid.
$13.55
P-H-YY-X Chassis Box - YY, Diecast, Slanted, 4.65" x 3.70" x 1.66"
Colors Available:
Slanted YY enclosures perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features
  • Vintage style slant
  • Flat top-section for mounting controls
  • Recessed lid
  • Thick diecast construction
Starting at $23.95
P-H1590CX Chassis Box - Hammond, 1590C, Diecast, 4.71" x 3.70" x 2.07"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $10.36
Save 20%
Originally: $12.95