Footswitch - 3PDT, Alpha, Latching, Solder Lugs
High quality Alpha 3PDT footswitch with solder lugs. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.
- Bushing Length: 11.5mm
- Threading: M12 x 0.75
- Solder Lugs
- Latching
SKU:
P-H501-ALPHA
Item ID:
046258
Application:
Brand:
Alpha
Termination Style:
Type:
After Humidity Test Contact Resistance | <50 MΩ | ||
After Test Contact Resistance | <100 mΩ | ||
After Test Operating Force | 3.0 +/- 1 kgf.cm | ||
Body Height | 16.7mm | ||
Body Length | 17 mm | ||
Body Width | 19.6 mm | ||
Bushing Length | 11.5mm | ||
Initial Contact Resistance | <30 mΩ | ||
Initial Insulation Resistance | >100 MΩ | ||
Initial Operating Force | 3.0 +/- 0.8 kgf.cm | ||
Life | 30,000 cycles | ||
Plunger Diameter | 10 mm | ||
Rating | 9 VDC 1A | ||
Threading | M12 x 0.75 | ||
Withstand Voltage | 500V AC 1 min. |
Packaging Dimensions | 0.77 in. × 0.67 in. × 1.74 in. | ||
Weight (Packaging) | 0.0419 lbs. |
My Project Lists
Questions? Contact us at [email protected], or give us a call at 480-820-5411
Customers who purchased this item also bought
- Resistors - 1/4 Watt, Metal Film, 1% tolerance
- Capacitor - Kemet, R82 Series, Polyester, 5mm Spacing
- Potentiometer - Alpha, Linear, Solid Shaft, Right Angle, 16mm
- Trimmer - Bourns, 3362P, Single Turn, Top Adjust, PCB Mount
- Resistors - 0.5 Watt, Carbon Composition
- Capacitor - 50V, Radial Lead, Electrolytic
Product Reviews
I've built 3 pedals before and with this switch I had problems removing a wire which resulted in a lug being pulled out. The holes on the lugs for this switch are not very big and when I needed to change the wiring I ruined part of the switch. I was lucky that my switch wasn't using an LED so I still go it to work. The other 3 PDT foot switches I have used before had a red plastic housing and seemed to be a bit more durable.