1. Home
  2. Products
  3. Pedal Parts / DIY

Footswitch - 3PDT, with built-in LED Ring

Footswitch - 3PDT, with built-in LED Ring

Footswitch - 3PDT, with built-in LED Ring image 1
Pictured: Blue
Pictured: Blue
Pictured: Green
Pictured: Green
Pictured: Red
Pictured: Red
Pictured: Red/Blue
Pictured: Red/Blue
Pictured: Red/Green
Pictured: Red/Green
Click to zoom in
Footswitch - 3PDT, with built-in LED Ring image 1Pictured: BluePictured: GreenPictured: RedPictured: Red/BluePictured: Red/Green
Customer Images:
No Images yet! Submit a product image below!
$8.25
In Stock

3PDT. LED ring requires a ~\frac{11}{16}~" mounting hole. Foot switch button set screw requires 1.5mm hex key.

Note: The body of these footswitches may be blue (as pictured) or they may be black.
SKU:
P-H590-X
Item ID:
041441
Application:
Pedal
Termination Style:
Solder Lugs/Tabs, PC Pins
Type:
LEDs, Bezels, & Bulbs, Footswitches
RoHS Compliant
Part Numbers
ColorOur Part NumberUPC/EAN
BlueP-H590-B841358107313
GreenP-H590-G841358107290
RedP-H590-R841358107283
Red/BlueP-H590-RB841358107344
Red/GreenP-H590-RG841358107337
Product Measurements by Type
Contact Resistance≤ 50 mΩ
Insulation Resistance≥ 100 MΩ @ 500 VDC
Item Height42 mm
Item Length21.7 mm
Item Width19.05 mm
LED Ring Diameter21.3 mm
Lifetime≥ 10,000 cycles
Mounting Hole Diameter0.675 in.
Rating @ 30 VDC4 A
Rating @ 125 VAC4 A
Rating @ 250 VAC2 A
Set Screw1.5 mm hex
Withstand Voltage1,000 VAC per minute
Packaging Information
Packaging Dimensions1.7 in. × 0.855 in. × 0.75 in.
Weight (Packaging)0.05 lbs.
Product Measurements by Item
P-H590-B - Blue versionContact Resistance≤ 50 mΩ
Insulation Resistance≥ 100 MΩ @ 500 VDC
Item Height42 mm
Item Length21.7 mm
Item Width19.05 mm
LED Ring Diameter21.3 mm
Lifetime≥ 10,000 cycles
Mounting Hole Diameter0.675 in.
Rating @ 30 VDC4 A
Rating @ 125 VAC4 A
Rating @ 250 VAC2 A
Set Screw1.5 mm hex
Withstand Voltage1,000 VAC per minute
P-H590-G - Green versionContact Resistance≤ 50 mΩ
Insulation Resistance≥ 100 MΩ @ 500 VDC
Item Height42 mm
Item Length21.7 mm
Item Width19.05 mm
LED Ring Diameter21.3 mm
Lifetime≥ 10,000 cycles
Mounting Hole Diameter0.675 in.
Rating @ 30 VDC4 A
Rating @ 125 VAC4 A
Rating @ 250 VAC2 A
Set Screw1.5 mm hex
Withstand Voltage1,000 VAC per minute
P-H590-R - Red versionContact Resistance≤ 50 mΩ
Insulation Resistance≥ 100 MΩ @ 500 VDC
Item Height42 mm
Item Length21.7 mm
Item Width19.05 mm
LED Ring Diameter21.3 mm
Lifetime≥ 10,000 cycles
Mounting Hole Diameter0.675 in.
Rating @ 30 VDC4 A
Rating @ 125 VAC4 A
Rating @ 250 VAC2 A
Set Screw1.5 mm hex
Withstand Voltage1,000 VAC per minute
P-H590-RB - Red/Blue versionContact Resistance≤ 50 mΩ
Insulation Resistance≥ 100 MΩ @ 500 VDC
Item Height42 mm
Item Length21.7 mm
Item Width19.05 mm
LED Ring Diameter21.3 mm
Lifetime≥ 10,000 cycles
Mounting Hole Diameter0.675 in.
Rating @ 30 VDC4 A
Rating @ 125 VAC4 A
Rating @ 250 VAC2 A
Set Screw1.5 mm hex
Withstand Voltage1,000 VAC per minute
P-H590-RG - Red/Green versionContact Resistance≤ 50 mΩ
Insulation Resistance≥ 100 MΩ @ 500 VDC
Item Height42 mm
Item Length21.7 mm
Item Width19.05 mm
LED Ring Diameter21.3 mm
Lifetime≥ 10,000 cycles
Mounting Hole Diameter0.675 in.
Rating @ 30 VDC4 A
Rating @ 125 VAC4 A
Rating @ 250 VAC2 A
Set Screw1.5 mm hex
Withstand Voltage1,000 VAC per minute

My Project Lists

You must be logged in to add items to a project list.

Questions and Answers

Click each question to see its answers.
Asked by Anonymous on October 9th, 2020.
MikeT
October 21st, 2020
Staff Member
Forward voltage and amperage are not available spec's but when using 9V, the green and blue led's work well with a 1k resistor and the red works well with a 390 ohm resistor.
[email protected]
July 6th, 2021
Blue LED ring (P-H90-B). The Forward Voltage, VFwd for a Blue LED ring is measured at 2.65 mA using an LCR-TC1 multi-function Tester. By calculation, the suggested 1 kΩ dropping resistor used with a 9 VDC supply provides a Forward Current, IFwd of 6.3 mA across a Blue LED ring. Red LED ring (P-H90-R). Similarly, the Forward Voltage, VFwd for a Red LED ring is measured at 1.8 mA By calculation, the suggested 390Ω dropping resistor used with a 9 VDC supply provides a Forward Current, IFwd of 18.4 mA across a Red LED ring. Alternatively, using a 1 kΩ dropping resistor with a 9 VDC supply will provide an adequate and more battery friendly Forward Current, IFwd of 7.2 mA across the Red LED ring.
Answer this question
Asked by Anonymous on June 28th, 2018.
BradWbr
June 28th, 2018
Staff Member
The best way to determine the right resistor value is to locate a LED calculator online. You will want to have the voltage and color information readily available. Different applications require different resistor values, so we are not able to advise on specific applications.
Answer this question
Asked by Anonymous on June 8th, 2019.
BradWbr
June 11th, 2019
Staff Member
The LED is separated from the 9 3PDT solder lugs for the switch.
Answer this question
Asked by [email protected] on February 5th, 2020.
BradWbr
February 6th, 2020
Staff Member
These are not available with a momentary option at this time. We do carry momentary switches however, such as the S-H604 and the S-H552.
Answer this question
Asked by [email protected] on July 1st, 2021.
MikeT
July 7th, 2021
Staff Member
These require an external current limiting resistor. The footswitch is unique to these and features and special set screw mounted actuator.
Answer this question
Terms and Conditions
Add a review

Product Reviews

No product reviews yet! Be the first!