Footswitch Box - for Marshall, Two Button, LED
Replacement Footswitch for Marshall Amps. Two Button. Light-Up LED. ¼" Plug. Generic version of Marshall PED802 (P-H875)
Compatible with: Valvestate VS100R and others
Note: LED must receive power externally from the amp (i.e. no battery inside).
Functional Diagram:
SKU:
P-H471-LED
Item ID:
002562
UPC/EAN:
609722125185
Replacement Type:
Type:
RoHS Compliant
| Item Height | 44 mm | |
| Item Length | 118.50 mm | |
| Item Width | 134 mm |
| Packaging Dimensions | 6.5 in. × 5.8 in. × 2.5 in. | |
| Weight (Packaging) | 1.749 lbs. |
 Battery Modification | All Models |
 Dimensions | All Models |
| Functional Diagram | All Models |
My Project Lists
Specifications, Files, and Documents
Dimensions Questions and Answers
Click each question to see its answers.
3 answers
Will this work with marshall jcm900 4500 50w head?
Asked by Anonymous on June 7th, 2017.
June 7th, 2017
Staff Member
It should work but the LED's will not work without the battery mod attached above.
Would the battery mod also be required for a JCM900 100 watt head?
September 8th, 2017
Staff Member
Most likely you would need the battery mod for the JCM900.
1 answers
I Bought this pedal works for the purpose but the LED does not function what can I do?
Asked by Anonymous on November 27th, 2015.
December 1st, 2015
Staff MemberTop Contributor
Be advised that the amp you are using the foot switch with must provide the external power for the footswitch or the LED lights will not function.
1 answers
How long is the cable on this foot switch?
Asked by Anonymous on February 24th, 2016.
February 24th, 2016
Staff MemberTop Contributor
The cable is 15' long.
1 answers
Will this work with the Marshall DSL100H amp?
Asked by Anonymous on April 27th, 2017.
April 27th, 2017
Staff Member
It should work but the LED's will not work without the battery mod above.
1 answers
Is the cable hardwired or does the casing have a trs jack?
Asked by griff on June 8th, 2017.
June 8th, 2017
Staff Member
The cable is hardwired to the footswitch and is accompanied by a strain relief.
1 answers
Will the battery mod be needed on a JCM900 4100 100 watt head? The channel part works but the reverb switch doesn't do anything. Both lights are on but dim. I am guessing the battery mod is required.
Asked by Anonymous on September 7th, 2017.
September 7th, 2017
Staff Member
Most likely you will need to do the battery mod since the JCM 900 is not designed to power the LED's in this switch.
1 answers
Will this work with a Marshall as50d amp?
Asked by Anonymous on July 25th, 2018.
July 25th, 2018
Staff Member
This footswitch is the generic version of the M-PEDL-91003 and that is the correct footswitch for the amp in question. This footswitch should be the correct one for your amp.
1 answers
Is it compatible with the MG100HDFX?
Asked by Anonymous on November 6th, 2018.
November 6th, 2018
Staff Member
This is the generic version of the PED802, and should most likely work with your amp. Note that the LED lights on this footswitch require power from the amp, as there is no internal battery in this footswitch.
0 answers
Will this work with a Blackstar HT 40 Club
Customers who purchased this item also bought
Product Reviews
Works with my Helios fine except led for loop works backwards which I knew. Saved about 75$ from what Bogner wanted to charge!
Foot switch work as is should.
Shipping,communication and customer support is what counts as much as the product.
Thanks,
~ JB ~ "GO STILLERZ"
Pedal works great. Serves it's purpose