Item Unavailable

Sorry! You're trying to check out one of our items which is no longer available. Why not check out one of these alternate options?
P-ECB-151Rubber feet - Dunlop, for Crybaby, includes screws
Package of 4

Rubber feet with screws for Dunlop Crybaby Wah pedal. Package of four. Original Dunlop replacement part. Rubber foot diameter: 5/8" Rubber foot height: 5/16" Screw threading: #6-32 (screw extends 5/16" beyond the rubber surface)


$2.60
Click to read more
P-ECB-035Switch - Dunlop, Footswitch, GCB-95

GCB-95 switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.


$9.95
Click to read more
P-ECB-244Battery Box - Dunlop, snap-in enclosure

Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.


$1.95
Click to read more
P-ECB-78Potentiometer - Dunlop, Wah, 10 kΩ linear

Genuine Dunlop replacement potentiometer for wah/volume.



  • 10 kΩ Linear
  • Gear included

$14.40
Click to read more
P-ECB-124Grommets - Dunlop, Offset, 3x4 Different Sizes
Package of 12

Original Dunlop offset grommets (i.e. rubber bumpers) used on the underside of the treadle piece (rocking structure) of wah pedal enclosures. Made in USA.


$6.95
Click to read more
P-ECB-24BPotentiometer - Dunlop, Hot Potz II Crybaby, 100 kΩ

Hot Potz II Crybaby Pot. for newer Crybaby models. Made by Beckman. 100 kΩ. Original Dunlop replacement part. The same tone and sweep characteristics as the original Cry Baby Hot Potz potentiometer with low wiper noise and extended life.


$20.59
Click to read more
P-ECB-31Felt Pad - Dunlop, replacement for Wahs
Replacement Dunlop felt pad for use with wah pedals. This circular felt pad has an adhesive side for an easy installation. The pad is typically installed on the underside of the pedal directly above the footswitch to cushion the contact when switching the wah on and off. Made in USA.
$1.25
Click to read more
R-VWAH-POT-XPotentiometer - Wah replacement pot with gear

Standard vintage style wah pots with solder lugs and gear included. Part # R-VWAH-POT (100K) has an audio taper. All others are linear.


$8.95
Starting at $5.95
You save: 34%
Click to read more
P-ECB-FI-02Inductor - Dunlop, Fasel Toroidal Model, Red

This precision-wound toroidal will give the cleanest sound possible. Use the cup core model, part number P-ECB-FI-01 for a more vintage sound. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from you rig.


$15.95
Click to read more
P-ECB-127Rack - Dunlop, replacement for wahs

Original Dunlop replacement rack for wah pedals (roll pin included: 0.77" length x 0.07" diameter - for mounting the rack to the treadle). The rack has 14 teeth and mounts to the underside of the treadle piece (rocking structure) of a wah pedal. The teeth of the rack interlock with the teeth of the wah potentiometer gear (i.e. pinion), thereby rotating the potentiometer's shaft as the treadle is rocked back and forth.


$1.95
Click to read more
S-H11XSolder Lug - #6 or #8 Hole, Locking
Package of 10

Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10


Starting at $1.50
Click to read more
R-NResistors - ¼ Watt, Metal Film, 1% tolerance
Package of 5

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. Package of 5. These resistors are perfect for pedal builders! 1/4 watt.


$1.80
Click to read more
C-ETRX-50Capacitor - 50V, Radial Lead, Electrolytic
Package of 5

High quality, radial leaded, aluminum electrolytic capacitors rated at 50VDC.


$0.49
Click to read more
R-VC-FLATWASHERWasher - CTS, Flat, for Potentiometers
Package of 10

Flat washer for 3/8" bushing. Perfect fit for CTS potentiometers. Package of 10.


$1.25
Click to read more
S-HLWXWasher - Internal Tooth Lock, spring steel
Package of 5

Spring steel tooth-lock washer. Uses internal teeth for locking and tension.


Starting at $0.45
Click to read more
C-ETRX-25Capacitor - 25V, Radial Lead, Electrolytic
Package of 5

High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.


Starting at $0.49
Click to read more
S-W8XLWire - 20 AWG Solid Core, Lacquered Cloth Cover, 600V
Colors Available:
#20 solid copper wire with modern insulation and lacquered cotton braid finish.

105°C temperature rating, 600V.

Stranded Core: S-W7XL
Starting at $9.00
Click to read more
P-L700-XLED - 5mm, Water Clear, High Brightness, Package of 5
Package of 5
Colors Available:

High brightness 5mm LED. Great for use in pedal and amp builds as well as other applications where a bold, bright, indicator is needed. Multiple colors available.



  • 5mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5

Starting at $1.30
Click to read more
P-0602HTerminal Strip - 6 Lug, 1st & 6th Lug Common, Horizontal
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 6 lugs, first and sixth lug are common.
$5.95
Click to read more
R-CResistors - ¼ Watt, Carbon Film, 5% tolerance
Package of 5

Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Package of 5. These resistors are perfect for pedal builders!



  • 1/4 watt
  • ± 5% tolerance
  • EIA color coded
  • .24" long x .08" diameter
  • Package of 5

$1.72
Click to read more