Grill Cloth - Tan / Brown Wheat, 34" Wide
Tan/Brown, wheat, Fender style grill cloth. Due to the constraints of mechanical reproduction, colors are not completely accurate. Sold per yard. Product will be in one continuous segment, cut to the ordered length.
Please note that because grill cloth/tolex needs to be cut, we cannot accept any returns on these items. Small grill cloth samples are available for evaluation by ordering part S-GSAMPLE. You can also order a full set of all of our Grill Cloth samples by ordering S-GSG1.
SKU:
S-G455
Item ID:
004067
UPC/EAN:
841358100475
Brand:
Generic
Color/Style:
Replacement Type:
Type:
Item Width | 34 in. | |
Width | 34 in. ±.5 in. |
Packaging Dimensions | 36 in. × 34 in. × 0.74 in. | |
Weight (Packaging) | 0.5 lbs. |
My Project Lists
Questions and Answers
Click each question to see its answers.
1 answers
Based on the picture above, where does it roll out? I have a 40" wide x 9" high speaker board to cover and wondering if that means the rectangle pattern would be horizontal or vertical?
Asked by Anonymous on June 8th, 2016.
Based on the picture as shown the cut would be 34" vertically and 36" horizontally for one yard. With the pinstripes oriented horizontally.
1 answers
It's a great product but stiff and hard to get tight around the edges. So it came out a little loose/wavy. Can I use a hair dryer to shrink the product tight or should I remove and reinstall.
Asked by Anonymous on July 21st, 2016.
Hi, some people have had success with lightly misting a bit of water on the cloth and heating it up before installing. This should help with getting the cloth nice and straight.
1 answers
Can I order a 68" one solid wide piece of material?
Asked by Anonymous on October 20th, 2016.
This grill cloth is 34" wide and 36" long (per yard). You could order two yards to get 68 inches. This will allow you to have 72" of cloth with the brown pinstripes oriented vertically. It will have a maximum height of 34".
1 answers
which direction do the dark brown stripes run? In the 34" direction or the 36" direction? The other answers are confusing.
Asked by jaynemo62 on October 15th, 2019.
The brown stripes will run the length of the material. If ordering 1Yd the brown stripes would be 36".
Product Reviews
Thin and I had some sort of production continuation seam in mine. Wish I hadn't gotten it.
A little disappointed at the material. My own fault. Its a fairly stiff vinyl...tolex, and nothing like speaker cloth. I should have done more research. It is not cloth at all......its plastic. I may use it for something else, but not on an 80 year old radio console.
It should be listed as a Grill Cloth substitute. I will still shop here, just need to be more careful.
MLSmith
Perfect! I wanted to revisit my DR amp I had built a few years back and wanted to change up the cosmetics. This grill from AES is the perfect fender style wheat grill. The quality is great - no broken strands or obvious mis-stitching. Having the baffle painted flat black helped bring out the pattern of grill.
The quality is good, but it is very shear with no backing cloth. You can see right through it. The baffle opening, the speaker drivers, the mounting screws (especially anything metallic) are all visible. You may need to paint everything behind it black to reduce its visibility.
Grill cloth was used in a Sears Silvertone console RX. Looks great! Thanks AES!
Perfect match!