Item Unavailable

Sorry! You're trying to check out one of our items which is no longer available. Why not check out one of these alternate options?
P-GTS-100XScrew - phillips, for pickguards / control plates
Package of 100
Colors Available:

Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.



  • 7/16” threaded portion
  • Available in Black, Gold, Nickel, and Chrome plating
  • Package of 100

Starting at $5.60
Click to read more
S-HS832-XScrew - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5

Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.


Starting at $0.75
Click to read more
S-HS440-XScrew - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5

Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.


Starting at $0.35
Click to read more
S-HS1032-XScrew - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Package of 5

Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.


$0.95
Click to read more
S-HST8-XScrew - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
Starting at $0.65
Click to read more
S-HSM4D7-20Screw - M4 x 0.70, Phillips, Pan Head, Stainless Steel, Machine
Package of 4

(Metric Threading: M4 x 0.70) - 20 mm long


$0.80
Click to read more
S-HS1032-1F-SETHardware - Fender, Screws & T-Nuts for Handle
Package of 5
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$2.95
Click to read more
S-H118Screw - Fender®, Pickup Mounting, for P-Bass & J-Bass
Package of 12

4 x 1.25, package of 12.


$4.95
On Backorder
Click to read more
P-GB-SCREW-1XScrew - Bigsby, Regular #125, Hinge
Colors Available:

Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.


Starting at $1.95
Click to read more
S-H119Screws - Fender®, Bridge Height Screws
Package of 12

Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.



  • Set of 12 hex set screws
  • For American Vintage Stratocaster and Telecaster guitars
  • Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.

$4.79
Click to read more
S-H11XSolder Lug - #6 or #8 Hole, Locking
Package of 10

Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10


Starting at $1.50
Click to read more
S-HKEP-XNut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10

Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.


$1.00
Click to read more
P-H264-NUTNut - 8-32, Keps with external tooth, zinc
Package of 10

Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.


$1.00
Click to read more
R-VC-FLATWASHERWasher - CTS, Flat, for Potentiometers
Package of 10

Flat washer for 3/8" bushing. Perfect fit for CTS potentiometers. Package of 10.


$1.25
Click to read more
S-H8FWFinishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10

Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.


$1.00
Click to read more
P-H200XWasher - 0.25" Inside Diameter, Felt
Package of 5
Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.95
Click to read more
S-HLWXWasher - Internal Tooth Lock, spring steel
Package of 5

Spring steel tooth-lock washer. Uses internal teeth for locking and tension.


Starting at $0.45
Click to read more