You are here

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(68 pages)
P-GGT-101-CBridge - Gotoh, Hardtail, Brass Saddles, Chrome
The Gotoh GTC101 is a fixed bridge for hard tail guitars such as Strat® style guitars with through-body string mounting. The bridge includes plated brass saddles for a warmer tone and features a 52.5mm string spacing. Saddle intonation and height can be individually adjusted with the included hex wrench. Mounting screws included.
$41.19
Click to read more
P-G-BRG-NXBridge - Nashville Tune-O-Matic, Zinc, USA
Colors Available:

Made in U.S. modern-spec tune-o-matic bridge with no retaining wire. This bridge is fully plated and comes with pre-slotted saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP120XC. This Nashville bridge is a great upgrade that features wider intonation adjustments and a larger mass for better tone and sustain.



  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
  • For use with 4.95mm stud posts

Starting at $22.50
Click to read more
P-G-BRG-A-NXBridge - ABR-1, Nonwired, Nylon Saddles, USA
Colors Available:

Made in U.S. vintage spec ABR-1 bridge with no retaining wire and nylon saddles. Hardware sold separately. See P-GKLU-KLP1273N for a complete set. The bridge uses string tension along with the set screws to secure the nylon saddles onto the bridge.



  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm

$22.50
Click to read more
P-BH-A-5BCBridge - Hipshot, 5-string, American Deluxe Retrofit, Brass

Give your Fender® bass that sleek, custom look and improved functionality it’s been begging for. This Hipshot Fender® Mount A Style bridge retrofits your American Deluxe 5-String with absolutely no modifications whatsoever.


$114.80
On Backorder
Click to read more
P-GB-HANDLE-1XVibrato Handle - Bigsby, Flat with Stud
Colors Available:

Genuine Bigsby® replacement flat handle with pre-installed stud. This flat handle is the stock handle used on most Kalamazoo Series vibratos.


Starting at $45.50
Click to read more
P-GTAMBridge - Fender®, American Series, Strat Tremolo Assembly

Powder coated steel saddles, screw in tremolo arm. Tremolo arm, intonation and tension springs, and mounting hardware included.


$95.00
Click to read more
P-GTNN02Nut blanks - Fender®, plastic, set of 2
Package of 2

Blank string nuts for Fender® guitars made of plastic


$4.95
Click to read more
P-NECK-S-03Neck - for Stratocaster Guitar, Rosewood

Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck. Heel width is 2 3/16".


$135.00
Click to read more
P-NECK-T-31Neck - for Telecaster Guitar, Vintage Maple

Replacement Vintage Telecaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 in. radius, 1 5/8 in. nut width, a comfortable C shaped profile and a honey tinted gloss finish. Maple finger board with a heel adjust truss rod location and 8.8mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Nut not included. Fender Licensed replacement neck.


$149.95
Click to read more
P-NECK-T-32Neck - for Telecaster Guitar, Rosewood

Replacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.


$135.00
On Backorder
Click to read more

Pages

(68 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Guitar Parts & Pickups