Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Switch Tip - Switchcraft, for Gibson® Pickup Selectors
Colors Available:
Switchcraft Switch Tip for Gibson Pickup Selectors. Threading: 8-32. Replacement for Gibson: PRTK-010
Starting at $2.15
Knob - Top Hat, Gibson Style see-through
Colors Available:
Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.
$1.95
Knob - Speed, Embossed Numbers, Gibson Style
Colors Available:
Gibson style speed knob with embossed numbers. For 6mm 24 teeth knurled shaft.
$2.25
Control Plate - Telecaster Style, for ⅜” Bushing Pots
Colors Available:
Tele style control plate. 5.9” plate mounting center distance (0.123” diameter, recessed).
  • Two potentiometer mounting holes for 3/8” bushing diameters
  • One standard selector switch mounting slot (1.63” mounting center distance, 0.15” diameter, recessed)
  • Made in Korea
Starting at $5.35
Pickguard Blanks - 12” x 18” sheet, 0.095” thickness
Color, Plys Available:
Blank pickguard material sheets for cutting custom pickguards, truss rod covers, and back plates. These sheets come in a variety of colors as well as single ply and three ply options. All colors feature a gloss surface.
$12.50
Knob - Top Hat, Black with Silver Cap, Gibson Style
Gibson style top hat knob. Fits fine knurled pot shafts.
$2.25
Knob - Top Hat, Gold with Silver Cap, Gibson Style
Gibson style top hat knob. Fits fine knurled pot shafts.
$2.25
Knob - Speed, Gibson Style see-through
Colors Available:
Gibson style speed knob. For 24 teeth knurled shaft.
$1.95
Knob - Top Hat, Embossed Numbers, Gibson Style
Colors Available:
Gibson style top hat knob with embossed numbers. Multiple color options available. Fits fine knurled pot shafts.
$2.25
Jack Plate - Fits Les Paul, Plastic
Colors Available:
Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.
$1.95
Control Plate - Jaguar Style, Master, Chrome
Jaguar style master control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.12” x 1.86” plate mounting center distance (0.14” diameter, recessed).
$6.50
Jack Plate - replacement for Stratocaster
Colors Available:
Replacement jack plate for Stratocasters
Starting at $4.55
Switchwashers - Rhythm / Treble, Gold Lettering, for Les Paul
Colors Available:
This Rhythm - Treble Ring for Gibson® Les Paul® is on thin plastic with Gold Lettering. The self-adhesive backing makes it easy to apply under the washer and nut of your typical 3-way toggle switch.
$1.95
Knob - Top Hat, Gold with Gold Cap, Gibson Style
Gibson style top hat knob. Fits fine knurled pot shafts.
$2.25
Knob - Top Hat, Black with Gold Cap, Gibson Style, Push-On
Gibson style top hat knob. 24 spline (for knurled split shaft pots).
$2.25
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Flat
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.
$3.95
Pickguard - Strat style, 3-Ply, 11 hole
Colors Available:
Stratocaster style 3 ply pickguard with 11 mounting holes. Top and bottom layers are the same with an alternate middle layer.
$7.15
Switch - Pickup Selector, Strat, 5-Way, Black
5-way switch for Strats, black tip.
$6.75
Tremolo springs - Replacement for Fender Style Tremolos
Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.
Starting at $1.15
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
$4.25
Control Plate - for Jazz Bass (J-Bass), Chrome
Standard (4-hole) and vintage (3-hole) versions. Replacement for most Jazz Bass style guitars. Made in Korea.
Starting at $8.20
Nut - Graphite, for Gibson, slotted
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55
Jack Plate - Electrosocket, for Tele, chrome plated brass
This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$10.75
Pickguard - Tele style, 3-Ply, Black / White / Black
Three-ply black/white/black ’62 Telecaster style pickguard with 8 mounting holes. This pickguard has no pickup mounting holes for use with neck pickups that mount directly to the guitar’s body.
$7.18