Guitar Parts & Pickups

A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Threaded thumbwheel style studs and bushings and features hard zinc saddles. Hardware included.

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.

For non-tremolo fixed bridge Strat® style guitars that have through-body string mounting. Steel saddle. Saddle intonation can be individually adjusted. Mounting screws included. Hardware included.

Designed to for use with the Telecaster® single coil pickup; this heavier brass bridge features six allen-adjustable brass saddles. Strings mount through the guitar body and all of the mounting screws are included. Hardware included.

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

Genuine Bigsby spring pack. This pack comes with all of the Bigsby spring sizes along with the nylon spring washer and fiber handle washer. Item Qty BigSby Part Number 11/16" long spring 1 0495-1964 7/8" long spring 1 0495-1967 1" long spring 1 0495-1975 1 1/8" long spring 1 0495-1978 Handle washer 1 0495-2331 Spring washer 1 0495-0410

Stud Mount Adjustable Bridge, Hardware, 2-1/16" String, 3-¼" Stud. Hardware included.

Made in U.S. modern-spec tune-o-matic bridge with no retaining wire. This bridge is fully plated and comes with pre-slotted saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP120XC. This Nashville bridge is a great upgrade that features wider intonation adjustments and a larger mass for better tone and sustain.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm
• For use with 4.95mm stud posts

Gotoh 510T Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Hardware included.

Gotoh 12-String Bridge for Electric Guitar – This Twelve string bridge for Electric Solidbody guitars allows each string to be individually adjusted for intonation. Hardware included.

Genuine Bigsby mounting screws pack. This pack comes with a variety of Bigsby screws common to many of their tremolo units. Item Qty BigSby Part Number Body Mount Screws 4 0495-1927 Hinge Mount Screws 4 0495-1923 Handle Bracket Set Scre 2 0495-1931

If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.

Chrome-plated steel bridge plate for use on American Vintage, Classic and Road Worn® series Telecaster® models.

• String-through-body three-saddle design
• Mounting hardware and bridge saddles not included

Two piece rosewood bridge with metal saddle. Adjustable style. 6” wide. For 6 or 12-string guitars with a tailpiece.

The Gotoh 510TS-FE1 tremolos are designed to withstand years of abuse and remain trouble free. This tremolo is precision machined and paired with steel saddles meant to last a lifetime. The patented FST tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. The 510TS-FE1 also uses Gotoh’s patented Stud Lock system for increased mounting stability. Hardware included.

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

Vintage-style chrome bridge assembly for use on most Standard, Deluxe, Roadhouse™, Lone Star™, and Blacktop Stratocaster models manufactured from 2006-present. Includes six bent "Fender"-stamped saddles, intonation screws and springs, and saddle-height adjustment screws. Mounting hardware, tremolo claw, tremolo springs and tremolo arm not included.

• 2-1/16" mounting spacing*
• Standard 10/32 tremolo arm threading
• For a variety of Stratocaster models (2006-present)

*Note that 2-1/16" bridge mounting spacing means that bridge-mounting screws will not fit vintage or vintage reissue instrument unless modified to do so.

Genuine Fender chrome hard-tail bridge assembly for use on Classic and Pawn Shop series instruments. Includes six stamped saddles, intonation screws and springs, and saddle-height adjustment screws.

• String-through-body design
• Mounting hardware not included
• 2-7/32" String Spacing

Genuine Bigsby® Sorkin bridge assembly for use with Bigsby vibrato units. The Sorkin bridge is also known as the bowtie bridge.
2 13/16” stud spacing.

Made in U.S. Modern spec tune-o-matic bridge. No retaining wire. Plated, preslotted saddles. Hardware included This is an awesome OEM bridge for builders or the DIY repairman offering a longer adjustment area and more mass than the original ABR-1 bridge. It matches Gibson specifications and is a drop-in, non-modification required replacement part.

• Thread = M5 - 0.8 Metric (as used by Gibson on Nashville Models)
• Post to Post Spacing = 2.93 in. (74.5mm)
• Saddle Notch = Center Notched Saddles
• Saddle Material = Zmac
• Bridge Material = Zmac
• Post/Thumbwheel Material = Brass
• Radius = 12 inch
• Post Top Diameter = .195 Inches / 4.95mm
• Bridge Center To Center Spacing = 2.93 inches
• Saddle Spacing = 10.4 mm

Made in U.S. vintage spec ABR-1 bridge with no retaining wire. Bridge posts and thumb screws included.
The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.

A newly fashioned design from Gotoh® with almost no internal friction. Designed to directly retrofit the mounting hole pattern of a vintage tremolo. You can use this bridge to replace a conventional, 6 mounting screw Strat® tremolo with no mods to the body. Hardware included.

High quality tremolo featuring height-adjustable saddles that lock to a hardened steel baseplate. Threaded studs and bushings, springs, spring holder, allen wrenches and adjustable-tension arm are included. Looking for a great tremolo system for better tuning stability, string energy transfer and note sustain? Then you have found it right here. Hardware included.

Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired. Hardware included.
The bridge features the vintage-style retaining wire that secures the brass saddles and intonation screws onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.