Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Switch Tip - Switchcraft, for Gibson® Pickup Selectors
Colors Available:
Switchcraft Switch Tip for Gibson Pickup Selectors. Threading: 8-32. Replacement for Gibson: PRTK-010
$2.70
Knob - Top Hat, Embossed Numbers, Gibson Style
Colors Available:
Gibson style top hat knob with embossed numbers. Multiple color options available. Fits fine knurled pot shafts.
$2.25
Knob - Top Hat, Black with Silver Cap, Gibson Style
Black Gibson style top hat knobs with silver caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
$2.25
Switch - Switchcraft, Pickup Selector, for Gibson® L-Type
Switchcraft 3 position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.
$20.95
Knob - Speed, Embossed Numbers, Gibson Style
Colors Available:
Gibson style speed knob with embossed numbers. For 6mm 24 teeth knurled shaft.
$2.25
Switch - Switchcraft, Pickup Selector, for Gibson® Straight
Colors Available:
Switchcraft 3 position Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.
Starting at $18.95
Knob - Speed, Gibson Style see-through
Colors Available:
Gibson style speed knob. For 24 teeth knurled shaft.
$1.95
Knob - Top Hat, Gibson Style see-through
Colors Available:
Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.
$1.95
Knob - Top Hat, Black with Gold Cap, Gibson Style, Push-On
Black Gibson style top hat knobs with gold caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
$2.25
Knob - Top Hat, Gold with Silver Cap, Gibson Style
Gold Gibson style top hat knobs with silver caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
$2.25
Knob - Top Hat, Gold with Gold Cap, Gibson Style
Gold Gibson style top hat knobs with gold caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
$2.25
Switchwashers - Rhythm / Treble, Gold Lettering, for Les Paul
Colors Available:
This Rhythm - Treble Ring for Gibson® Les Paul® is on thin plastic with Gold Lettering. The self-adhesive backing makes it easy to apply under the washer and nut of your typical 3-way toggle switch.
$1.95
Jack Plate - Fits Les Paul, Plastic
Colors Available:
Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.
$1.95
Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
Nut - Graphite, for Gibson, slotted
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55
Truss Rod Cover - bell shape, fits Gibson
Colors Available:
This truss rod cover will directly replace any Gibson two-screw bell shaped truss cover with no modifications. Mounts with (2) screws not included. Available in B/W/B or Cream
$4.45
Fret wire - Dunlop, pre-cut, large, for early Gibson
Dunlop®, 6130,.036" x.106", 28% nickel/silver, hard alloy, 2 5/8" long, large/jumbo size, good on early Gibson®, 24 pieces
$14.95
package of 24
Tailpiece - Les Paul, Standard Style, Chrome
Replacement chrome tailpiece for Les Paul style guitars and others. M8 * 12.5 thread studs (anchor bushings included). Made in Korea.
$17.45