You are here

Guitar Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(2 pages)
P-GTNN09Nut - Plastic, for Electric Guitars, Each
Plastic electric guitar nut.
$1.95
Click to read more about this product.
P-GTNN10Nut - Plastic, for Strat, Each
Plastic strat guitar nut.
$1.95
Click to read more about this product.
P-GTNN06-SLOTNut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
Click to read more about this product.
P-GTNN08Nut - Graphite, for Gibson
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55
Click to read more about this product.
P-GTNN07Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
Click to read more about this product.
P-GTNN12Nut - Fender®, Pre-slotted, Melamine, for Tele and Strat

Original Fender pre-slotted melamine nut for Teles and Strats.


$7.95
Click to read more about this product.
P-GTNN14Nut - Original Fender, Pre-Slotted Brass
High-quality solid-brass string nut as used on the Yngwie Malmsteen Stratocaster®, for use with Stratocaster and Telecaster® guitars.
Designed for 9.5"-radius fingerboards and pre-slotted with string location grooves to simplify spacing and positioning during final slot filing.
Note that some filing and shaping modifications may be required to ensure proper fit and performance.
• High-quality solid-brass string nut
• For 9.5" fingerboard radius
• Pre-slotted
• 9.5" (241mm) top and bottom radius
• 1.620” (41.15mm) wide
$14.39
Click to read more about this product.
P-GTNN13Nut - Fender®, Pre-slotted, Bone, for Tele and Strat

Original Fender pre-slotted bone nut for Teles and Strats.


$14.95
Click to read more about this product.
P-GTNN-ZBXNut - Gold Tone, Zero Glide Blank (Unslotted)
Multiple Options Available

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included.


$24.00
Click to read more about this product.
P-GTNN-ZBXLNut - Zero Glide for Classical Guitar
Multiple Options Available
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument.
Zero fret wire included.
$24.00
Click to read more about this product.

Pages

(2 pages)
Subscribe to RSS - Guitar Parts