Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Tuner - Hipshot, BT2 Bass Xtender, Nickel
Retrofit your USA '67-'82 Fender P & J Bass for drop tuning! Also retrofits Geddy Lee, reissue '67-'82 Fender. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.
$99.95
Pickguard - For Tele, 8 Hole, Anodized Aluminum, Gold
Gold anodized aluminum Telecaster style pickguard with 8 mounting holes. This pickguard has two pickup mounting holes for use with neck pickups that mount directly to the pickguard. All pickguard mounting holes are countersunk and the pickup mounting holes are flat.
$24.95
Pickguard - Tele® style, 3-Ply, 8 Hole
Colors Available:
Three-ply Telecaster® style pickguards with 8 mounting holes. This pickguard has no pickup mounting holes for use with neck pickups that mount directly to the guitar’s body. All mounting holes are countersunk.
Starting at $7.39
Pickguard - P-Bass, 13 hole, Anodized Aluminum, Gold
Gold anodized aluminum P-Bass style pickguard with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration. All mounting holes are countersunk.
$29.95
Pickguard - Strat® style, 11 hole, Anodized Aluminum
Colors Available:
Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.
$24.95
Pickguard - for Standard Strat®, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® Standard Stratocaster models. These pickguards have eleven mounting holes and are cut for the classic strat configuration. Fits most American and Mexican Standard Stratocasters®. Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
Starting at $11.30
Pickguard - For Standard Strat®, HSS, 11 Hole, 3-Ply
These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. Fits most American and Mexican Standard Stratocasters® that are routed for a humbucker bridge pickup.
$10.25
On Backorder
Pickguard - For '57 Strat®, 8 Hole, 3-Ply
Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:
  • 3-ply / 2.5mm thickness
  • 8 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
$10.25
Pickguard - For Tele, 5 Hole, Anodized Aluminum, Gold
Gold anodized aluminum Telecaster® style pickguard with 5 mounting holes. This pickguard has two pickup mounting holes for use with neck pickups that mount directly to the pickguard. All pickguard mounting holes are countersunk and the pickup mounting holes are flat.
$24.95
Pickguard - for Tele, 5 Hole, Single Ply
Colors Available:
Replacement pickguard for Telecaster guitars. These pickguards feature five mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity.
Starting at $8.50
Pickguard - for American Deluxe Strat®, HSS, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® American Deluxe Strat models. These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. The humbucker cutout has rounded corners for a flush fit with uncovered pickups. Fits most American Deluxe Stratocasters® that are routed for a humbucker bridge pickup. Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
$11.30
Tuner - Hipshot, HB2 for Bass, nickel
Replace your sloppy, worn out tuning machines with a set of Hipshot American Classics. The HB2 is a direct replacement for the Schaller® BMF tuner that was first found on CBS era Fender® basses manufactured between 1967 and 1982. Since then, the BMF tuner has been featured on countless boutique builds and Custom Shop models.
$29.95
Tremolo arm - for Vintage Stratocaster
Tremolo Arm, Screw-Down, Steel 5mm-0.8p
  • Material: Steel 5mm
  • Handle Type: Screw-down
  • Vintage Thread: M5.0 - 0.8p
  • Plating: Chrome
  • Tip: White
$4.95
Fret wire - Dunlop, pre-cut, medium, for early Fender®
Dunlop Accu-Fret® fretwire is manufactured from a durable nickel/silver alloy and delivers a warm and clear tone-the preferred brand for guitar builders and repairmen worldwide. Good on early Fenders®.
$15.45
package of 24
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
$4.95
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Flat
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.
$3.95
Nut - Brass, for Fender, blank un-slotted
This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.
  • Thickness = 9/64 inches (3.47mm)
  • Flat Bottom Length = 1 11/16 inches (43 mm)
  • Height at ends = 13/64 inches (5.25mm)
  • Height at middle = 15/64 inches (6mm)
$6.50
Nut - Graphite, for Fender, blank unslotted
This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.
  • Length = 2 1/64 inches (51.25mm)
  • Height = 11/64 inches (4.55mm)
  • Thickness = 1/8 inch (3.1mm)
$4.55
Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
Nut - Plastic construction, for Stratocaster
Stratocaster guitar nut - plastic construction
$1.95
Jack Plate - replacement for Stratocaster
Colors Available:
Replacement jack plate for Stratocasters
Starting at $4.79
Tremolo springs - Replacement for Fender Style Tremolos
Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.
Starting at $1.29
Jack Plate - for Telecaster, Chrome
Replacement jack plate for Telecasters
$5.10
Jack Plate - Electrosocket, for Tele, chrome plated brass
This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$5.45