You are here

Guitar Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(12 pages)
P-GV5-ST-AAdaptor Kit - Vibramate, V5-ST Short Tail, polished aluminum

Vibramate Short Tail V5 Adaptor Mounting Kit, For Bigsby B5, Aluminum The Vibramate V5 Short Tail Mounting Kit is the same as the Original V5 kit but designed for tighter locations such as the SG Classic style guitars that feature a larger pickguard.


$54.95
Click to read more about this product.
P-GTBSH-VBBushings - Fender®, vintage bass tuning key, 4 pieces, nickel
Original Fender® vintage bass tuning key bushings, nickel set of 4.
$6.95
Click to read more about this product.
P-GTBSH-VBushings - Fender®, vintage tuning key, 6 pieces, nickel
Fender® replacement tuning key bushings
$6.50
Click to read more about this product.
P-GT10XBushings - Kluson, ¼" bushings, set of 6
Colors Available:
Adapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6.
These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs.
  • Outside diameter: 9.98mm
  • Inside diameter: 1/4 inch (about 6.35mm)
Starting at $7.50
Click to read more about this product.
P-BH-XK-4CKey - Hipshot, BT4 Bass Xtender Key, Chrome
Hipshot Standard BT4 Bass Extender Key, Chrome.

Retrofit your Fender bass equipped with 2 mounting pin tuners for drop tuning. Fits 11/16 headstock holes. Installation instructions and mounting hardware included.
$54.95
Click to read more about this product.
P-BH-XK-HE6Y-BKey - Hipshot, HE6Y Bass Extender, ⅜", Black
Extend the range of your bass with the ultralite Xtender Key! 3/8 model (diameter of stringpost) is designed to fit 9/16 headstock holes.
$72.95
Click to read more about this product.
P-GKLU-KCD3801XMachine Head - Kluson, 3+3, Contemporary Diecast
Colors Available:
3 per side. New Kluson® 19:1 ratio die-cast tuning machine set for contemporary guitars.
These state of the art diecast tuners are designed for usage on contemporary guitars and utilize the same mounting hole common to Grover 305 series medium tuners as well as the common Gotoh tuner with the mounting screw located offset at approximately 7 O'clock or 5 O'clock depending on left or right handed application. Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. All mounting hardware is included.
$41.95
Starting at $27.95
You save: 33%
Click to read more about this product.
P-GKLU-KL3801XMachine Head - Kluson, 3+3, Locking, Large Metal Button
Colors Available:
3 per side. The Kluson Contemporary Series 19:1 ratio locking tuning machine uses the more desirable rear knob locking system and is designed for usage on contemporary guitars. This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side). Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. This is a 3 + 3 set of tuning machines with all mounting hardware included.
$62.95
Starting at $40.95
You save: 35%
Click to read more about this product.
P-GKLU-KCD3805XLMachine Head - Kluson, 6/line, Contemporary Diecast
Colors Available:
6-in-a-line. New Kluson® 19:1 ratio die-cast tuning machine set for contemporary guitars.
These state of the art diecast tuners are designed for usage on contemporary guitars and utilize the same mounting hole common to Grover 305 series medium tuners as well as the common Gotoh tuner with the mounting screw located offset at approximately 7 O'clock or 5 O'clock depending on left or right handed application. Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. All mounting hardware is included.
$41.95
Starting at $27.95
You save: 33%
Click to read more about this product.
P-GKLU-KL3805XLMachine Head - Kluson, 6/line, Oval Metal Button
Colors Available:
The Kluson Contemporary Series 19:1 ratio locking tuning machine uses the more desireable rear knob locking system and is designed for usage on contemporary guitars. This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side). Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. This is a 6 in line set of tuning machines for right handed instruments (non-reverse headstocks) with all mounting hardware included
$62.95
Starting at $42.95
You save: 32%
Click to read more about this product.

Pages

(12 pages)
Subscribe to RSS - Guitar Parts