You are here

Guitar Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(4 pages)
P-GKLU-KLP11XAnchor Bushings - Kluson, Clear Zinc, package of 2
Multiple Options Available
Made in U.S. vintage anchor bushings. Heavy knurl with vintage spec standard stoptail anchor bushings, in clear zinc.
This Kluson® standard stop bar tailpiece anchor bushing is made from zinc, has fine knurling for easy installation and fits most guitars. Sold separately from studs.
$3.50
$3.08
You save: 12%
Click to read more
P-GKLU-KLP1273NBridge - Kluson, ABR-1, Nonwired Nylon Saddles, Nickel

Made in U.S. Vintage spec ABR-1 bridge. Non-wired. Hardware included. This is the Kluson ABR-1 bridge with nylon saddles. True to specs like the original with no retaining wire. The saddles are held in place with a combination of string tension and the intonation screw end fitting into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!


$23.95
$21.08
You save: 12%
Click to read more
P-GKLU-KLP127XBridge - Kluson, ABR-1, Nonwired, Brass Saddles
Colors Available:

Made in U.S. Vintage spec ABR-1 bridge. Non-wired. Hardware included. True to specs like the original with no retaining wire. The saddles are held in place with a combination of string tension and the intonation screw end fitting into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!


$42.95
Starting at $37.80
You save: 12%
Click to read more
P-GKLU-KLP128X2Bridge - Kluson, ABR-1, Wired, Brass Saddles
Colors Available:

Made in U.S. Vintage spec ABR-1 bridge. Wired. Hardware included. This is the Kluson ABR-1 bridge with the retaining wire and saddles plated to match the frame. True to original mounting specs. The saddles are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!


$38.95
$34.28
You save: 12%
Out of Stock
Click to read more
P-GKLU-KLP128XBridge - Kluson, ABR-1, Wired, Raw Brass Saddles
Colors Available:

Made in U.S. Vintage spec ABR-1 bridge. Wired. Hardware included. This is the Kluson ABR-1 bridge with the retaining wire and raw brass saddles for great tone transfer. True to original mounting specs. The saddles are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!


$22.75
Starting at $20.02
You save: 12%
Click to read more
P-GKLU-KHBSCBridge - Kluson, Harmonica, Steel Chrome with Brass Saddles
KLUSON® HARMONICA BRIDGE STEEL WITH BRASS SADDLES


This bridge, popularly referred to as the harmonica bridge is a direct replication of the original using all the same quality fabrication, dimensions and best of all, milled from steel billet to give you the tone you crave. Now there is finally a proper replacement for all those vintage Gibson guitars without having to modify the original instrument! Just when you thought you weren’t going to be able to restore your original hardware, Kluson comes through!


Important Specs and Dimensions:


Bridge Dimensions = 3.5 in. L X 1 in. W X 25/64 in. at center
E to E String Spacing = 52mm
String Pitch = 10.4mm
Radius = 12 inch
Material = Milled Billet Steel w/ brass saddles
Stud thread = 8mm X 1.25 pitch
Inserts included
$149.95
$131.96
You save: 12%
Click to read more
P-GKLU-KLP120XCBridge - Kluson, Nashville Tune-O-Matic, Zinc
Colors Available:

Made in U.S. Modern spec tune-o-matic bridge. No retaining wire. Plated, preslotted saddles. Hardware included Kluson is back in the hardware game with this new USA made Nashville-style Tune-O-Matic bridge. This is an awesome OEM bridge for builders or the DIY repairman offering a longer adjustment area and more mass than the original ABR-1 bridge. It matches Gibson specifications and is a drop-in, non-modification required replacement part. We dare you to compare, you'll never go back!


$22.50
Starting at $19.80
You save: 12%
Click to read more
P-GT10XBushings - Kluson, ¼" bushings, set of 6
Colors Available:
Adapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6.
These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs.
  • Outside diameter: 9.98mm
  • Inside diameter: 1/4 inch (about 6.35mm)
$7.50
Starting at $6.60
You save: 12%
Click to read more
P-GKLU-05BKButton - Kluson, Butterbean, Black Plastic, for Machine Heads
Replacement Butterbean (oval) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-05P for white version.
$2.10
$1.85
You save: 12%
Click to read more
P-GKLU-05PButton - Kluson, Butterbean, White Plastic, for Machine Heads
Replacement Butterbean (oval) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-05BK for black version.
$2.10
$1.85
You save: 12%
Click to read more

Pages

(4 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Guitar Parts