Guitar Parts & Pickups
Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Knob - Speed, Embossed Numbers, Gibson StyleGibson style speed knob with embossed numbers. For 6mm 24 teeth knurled shaft.
Switch - 3-Way lever for Telecaster
Oak 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
End Buttons / Pins - Grover, for quick-release Strap locksReplacement End Pins for Grover Quick-Release strap locks. These extra end pins can be mounted on all guitars making it possible to use just one strap! Smooth, polished parts will not damage or mark up
Starting at $2.69
package of 2
Control Plate - Telecaster Style, for ⅜” Bushing PotsTele style control plate. 5.9” plate mounting center distance (0.123” diameter, recessed).
- Two potentiometer mounting holes for 3/8” bushing diameters
- One standard selector switch mounting slot (1.63” mounting center distance, 0.15” diameter, recessed)
- Made in Korea
Starting at $6.95
Wire - 20 AWG Stranded Core, Lacquered Cloth Cover, 600V#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 105°C temperature rating, 600V. For a solid core version, see: S-W8XL
Switch - 5-Way lever for Stratocaster
Oak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
Tuner Knob - Kluson, Butterbean, Plastic, for tunersReplacement Butterbean (oval) press-on button for Kluson® tuning machines. Correct for vintage applications.
Switch - Switchcraft, Pickup Selector, for Gibson® L-Type
Switchcraft 3 position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.
Knob - Top Hat, Black with Silver Cap, Gibson Style
Black Gibson style top hat knobs with silver caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
Knob - Push-On, Marshall Style, black base.77" diameter x .62" tall. Fits both fine and coarse knurled pot shafts.
Cap Colors Available:
Knobs - Fender®, Stratocaster, 1 Volume, 2 ToneOriginal Fender Replacement Knobs For Strat. Push-On. Fits both coarse and fine knurled pots.
Starting at $6.25
package of 3
Machine Screw - 3-48 x 1”, Phillips, Pan HeadOriginal, made in USA, 3-48 x 1” machine screws. These premium screws are perfect for mounting humbucker pickups that need a shorter screw.
Knob - Large, Indicator Line, Set ScrewLarge, knob with line indicator and set screw similar in style to the Davies 1500 and 1510 knobs. Pairs well with P-K380X. Fits ¼” (6.35mm) pot shafts.
- Knob Height = 0.60"
- Pointer Diameter = 1.06"
- Fits 1/4" shaft with set screw
- Oversized Davies 1510 Clone
Starting at $1.05
Knob - Top Hat, Gold with Silver Cap, Gibson Style
Gold Gibson style top hat knobs with silver caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
package of 5
Pickup Kit - Build Your Own Humbucker
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.
Starting at $19.75
Pickup Part - Black Bobbin, 7-string
Black humbucker screw or slug side bobbin for building or repairing 7-string pickups. Compatible with our 7-string baseplate (P-GP-PLATE-3). 61.2mm/2.40” pole spacing(outer holes center to center
Starting at $2.40
Wire - 22 AWG Solid Core, PVC, 600V, 50 Foot Roll600V solid wire. UL style 1015, rated to 105 degrees C. Perfect for new projects, rewiring electrical equipment, or use in breadboards, perfboard, and veroboard/stripboard.
Strap Buttons / Pins - Gotoh, EP-B2, Vintage StyleGotoh’s EP-B2 is a high quality set of vintage style strap buttons that fit nicely on any guitar or bass. These buttons match the look of the classic strap buttons but are finely machined and plated for a high quality appearance. This set includes two strap buttons and two matching screws.
Starting at $2.80
package of 2
Knob Cover - Dunlop, rubber, for MXR knobs
Replacement black rubber knob cover for Original MXR knob (P-ECB-130). Original Dunlop replacement part.
Knob - Small Chicken Head, Black, Set Screw
Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.
Screw - 1", Phillips, Oval Head, Matching T-Nut
1" Oval head, Phillips screw with matching t-nut. (package of 4)
package of 4
Pickup Part - Base Plate, Tele Bridge, Steel, Copper Plated
Copper plated steel baseplate for building a Telecaster bridge pickup or repairing a vintage original.
- .04” copper plated steel
- 6-32 mounting screw thread
- Sold individually
Knob - Speed, Gibson Style see-throughGibson style speed knob. For 24 teeth knurled shaft.