Guitar Parts & Pickups

Gotoh 510TS Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. Comes stock with a vintage steel block with more mass and better tone. These are top of the line Gotoh tremolo units. Tremolo-unit includes the following accessories: Arm, Spring, Spring-holder, Wrench, Stud-bolt, Screw etc… Hardware included.

Direct replacement for most Fender 5 String P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included. Hardware included.

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

Gotoh 510T Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Hardware included.

A tremolo-unit includes the following accessories. Arm, spring, spring-holder, wrench, stud-bolt, screws. U.S.A. threads screws. String spacing:

• 56mm from low E string to high E string
• 11.2mm between each string

The Gotoh Relic GE104B bridge is a convincingly aged part that is perfect for a vintage or relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This bridge features zinc saddles, a 52mm string spacing, a 400mm radius, and 74mm stud spacing. M4 threaded mounting posts and thumb screws are included.

Gotoh's unique grooving on the “In-Tune” saddles results in more exact intonation compared to traditional vintage-style saddles. Each saddle is reversible and can be used in any position. Titanium construction is used for rich harmonic overtones and long sustain. The brass saddles create a bright sound. 10.8mm string spacing

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.

At first blush, the KickAss™ might seem like a simple, heartfelt tribute to Leo Quan’s BadAss II®. A closer look, however, reveals significant improvements under the hood that put this bridge in a class of its own. Hipshot worked hard to ensure that the KickAss™ possesses the soul of the beloved original without being a knockoff.

The 7 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.

The Hipshot US Contour bridge is unlike any tremolo system out there. Hardened steel pivot pins inserted into a machined brass top plate give the US Contour a bell like tonal quality and silky smooth whammy action! Coupled with a solid machined steel tremolo block, the US Contour can achieve tremendous sustain and volume. Best of all, it is designed to retrofit any guitar using the American Standard tremolo routing convention. No additional routing required!

Features Include:

• Adjustable tension press in tremolo arm
• Stainless steel saddles
• High quality springs
• Chrome finished brass top plate

Made in U.S. Modern spec tune-o-matic bridge. No retaining wire. Plated, preslotted saddles. Hardware included This is an awesome OEM bridge for builders or the DIY repairman offering a longer adjustment area and more mass than the original ABR-1 bridge. It matches Gibson specifications and is a drop-in, non-modification required replacement part.

• Thread = M5 - 0.8 Metric (as used by Gibson on Nashville Models)
• Post to Post Spacing = 2.93 in. (74.5mm)
• Saddle Notch = Center Notched Saddles
• Saddle Material = Zmac
• Bridge Material = Zmac
• Post/Thumbwheel Material = Brass
• Radius = 12 inch
• Post Top Diameter = .195 Inches / 4.95mm
• Bridge Center To Center Spacing = 2.93 inches
• Saddle Spacing = 10.4 mm

Made in U.S. Vintage spec ABR-1 bridge. Non-wired. Hardware included.
ABR-1 bridge with nylon saddles. True to specs like the original with no retaining wire. The saddles are held in place with a combination of string tension and the intonation screw end fitting into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!

Made in U.S. vintage spec ABR-1 bridge with no retaining wire. Bridge posts and thumb screws included.
The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.

Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired. Hardware included.
The bridge features the vintage-style retaining wire that secures the brass saddles and intonation screws onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.

The ResoMax 4mm bridge is made from Graphtech’s ResoMax alloy. ResoMax is lightweight, high strength, and full of harmonics that will leave your guitar dripping with tone. It comes preloaded with String Saver saddles to reduce string breakage and improve tuning stability. All ResoMax bridges feature Graphtech’s patented magnetic lock to the steel posts that come with it. 4mm posts are used in a lot of American and European-built guitars, and brands such as Gibson, Godin, and Duesenberg. Please see the measurement guide to verify compatibility. The ResoMax NV2 is loaded with Graphtech’s Patented String Saver Saddles. These saddles are impregnated with PTFE and will dramatically reduce string breakage and improve tuning performance.

The ResoMax 6mm bridge is made from Graphtech’s ResoMax alloy. ResoMax is lightweight, high strength, and full of harmonics that will leave your guitar dripping with tone. It comes preloaded with String Saver saddles to reduce string breakage and improve tuning stability. All ResoMax bridges feature Graphtech’s patented magnetic lock to the steel posts that come with it. This is a great option to upgrade or replace the existing bridge on your Epiphone, ESP, LTD, BC Rich, Carvin, Schecter as well as many other import guitars. Please see the measurement guide to verify compatibility. The ResoMax NV2 is loaded with Graphtech’s Patented String Saver Saddles. These saddles are impregnated with PTFE and will dramatically reduce string breakage and improve tuning performance.

Two piece rosewood bridge with metal saddle. Adjustable style. 6” wide. For 6 or 12-string guitars with a tailpiece.

Tremolo bridge assembly for use on most American and American Standard series Stratocaster models manufactured from 1986-2007. Six powder-coated steel block saddles with off-center intonation screws, screw-in tremolo arm with white tip, mounting hardware and adjustment wrenches included. Features:

• Six powder-coated steel block saddles with off-center intonation screws
• Screw-in tremolo arm with white tip included
• Mounting hardware and adjustment wrenches included
• 2-7/32" (2.220") mounting and modern 2 1/16” (2.0625”) string spacing
• Used on American and American Standard series Stratocaster models (1986-2007)

Genuine Fender synchronized bridge assembly for USA made Deluxe/ Ultra Stratocasters manufactured after 1986. This assembly is also used on the Elite series Stratocasters and an assortment of vintage-style and modern models. Also an upgrade for American Standard Stratocasters. Kit includes the following:

• 1 × Steel block
• 1 × Pop-in tremolo arm
• 6 × Block style saddles with offset intonation screws
• 2 × Pivot pins
• 2 × Pivot pin bushings
• 5 × Tremolo springs
• 1 × Tremolo claw
• 1 × String Tree

Fender part number: 007-7092-049

Original Fender® modern six-saddle bridge assembly for use on American, American Deluxe and American Standard series Telecaster guitars manufactured from 1986-2007. Includes string-through-body plate, six American series bridge saddles with offset intonation screws, mounting hardware and adjustment wrenches.

Pre-slotted chrome replacement bridge for Gibson Les Paul and others. Nashville style posts: M4 x 0.70, 25 mm height. Made in Korea.

Vintage style ABR bridge. Wired. Hardware included The saddles on this ABR bridge are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just as the vintage originals were designed.

• Thumbwheels and threaded rod included
• Made In Korea

Genuine Fender American Vintage bass bridge for Jazz bass and Precision bass. Complete assembly with old-style threaded saddles and mounting screws.