Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Baseplate - Mini Humbucker, 50mm, USA
Original, made in USA, mini humbucker frame. This premium baseplate has a 50mm spacing and is made of raw nickel silver.
$6.55
Baseplate - P-90, Dog Ear, Bridge, 50mm, USA
Original, made in USA, dog ear P-90 frame with a 50mm spacing traditionally used in the bridge position. This premium baseplate is made of raw nickel silver.
$7.73
Baseplate - P-90, Soap Bar, 50mm, USA
Original, made in USA, soap bar P-90. This premium baseplate has a 50mm spacing is made of raw nickel silver.
$7.58
Baseplate - Tele, Vintage Correct, Cyanide Copper, USA
Original, made in USA, tele baseplate with vintage-correct specifications. This premium baseplate is made of steel and features a cyanide copper plating. The cyanide copper plating is not polished and will have varied appearances.
$4.34
Baseplate - Tele, Vintage Correct, Raw Steel, USA
Original, made in USA, tele baseplate with vintage-correct specifications. This premium baseplate is made of raw steel.
$4.34
Bigsby Parts Kit - All Mounting Screws Pack
Colors Available:
Genuine Bigsby mounting screws pack. This pack comes with a variety of Bigsby screws common to many of their tremolo units. Item Qty BigSby Part Number Body Mount Screws 4 0495-1927 Hinge Mount Screws 4 0495-1923 Handle Bracket Set Scre 2 0495-1931
Starting at $8.95
Bigsby Parts Kit - All Spring Sizes Plus Washers
Colors Available:
Genuine Bigsby spring pack. This pack comes with all of the Bigsby spring sizes along with the nylon spring washer and fiber handle washer. Item Qty BigSby Part Number 11/16" long spring 1 0495-1964 7/8" long spring 1 0495-1967 1" long spring 1 0495-1975 1 1/8" long spring 1 0495-1978 Handle washer 1 0495-2331 Spring washer 1 0495-0410
Starting at $17.95
Bigsby Parts Kit - Conventional B6 Hinge
Colors Available:
Genuine Bigsby conventional B6 hinge parts kit. Includes the hinge pin and four mounting screws. Item Qty BigSby Part Number Hinge 1 0495-0891 Hinge Pin 1 0495-1635 Mounting Screws 4 0495-19323
Starting at $35.95
Bigsby Parts Kit - Essential Small Parts Pack
Colors Available:
Genuine Bigsby essential small parts pack. This pack comes with a variety of Bigsby parts common to many of their tremolo units. Item Qty BigSby Part Number Handle Stud 1 0495-1980 Handle Spring 1 0495-1960 Handle Nut 1 0495-1410 Hinge Pin 1 0495-1635 Roller Bearing 1 0495-0230 Needle Bearing 2 0495-0237
Starting at $17.95
Bigsby Parts Kit - Extra Short Hinge, B3 / B7
Colors Available:
Genuine Bigsby extra short hinge parts kit. Includes the hinge pin and four mounting screws. The extra short hinge is stock on the B3 and B7. Item Qty BigSby Part Number Hinge 1 0495-0896 Hinge Pin 1 0495-1635 Mounting Screws 4 0495-1932
Starting at $35.95
Bigsby Parts Kit - Gretsch B6 Hinge
Colors Available:
Genuine Bigsby Gretsch B6 hinge parts kit. Includes the correct short hinge pin and four mounting screws. Item Qty Bigbsy Part Number Hinge 1 0495-0890 Hinge Pin 1 0195-1638 Mounting Screws 4 0495-1923
Starting at $35.95
Bobbin - Humbucker, P.A.F., 49.2mm, Screw Side, Butyrate, USA
Colors Available:
Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.
$3.03
Bobbin - Humbucker, P.A.F., 49.2mm, Slug Side, Butyrate, USA
Colors Available:
Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.
$3.03
Bolt - Fender®, micro tilt adjustment for 3-bolt neck plate
MicroTilt disk bolt, 1/4-28 x 1916". Genuine Fender® 3 bolt neck micro tilt adjust mounting bolt. This bolt goes in the lower location in the Fender 3-bolt neck plate. This bolt is secures your neck angle adjustment once you have made your neck tilt angle change with the set screw.
$3.65
Bridge - ABR-1, Nonwired, Nylon Saddles, USA, nickel
Made in U.S. vintage spec ABR-1 bridge with no retaining wire and nylon saddles. Hardware sold separately. See P-GKLU-KLP1273N for a complete set. The bridge uses string tension along with the set screws to secure the nylon saddles onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
$24.75
Bridge - ABR-1, Nonwired, Plated Brass Saddles, USA
Colors Available:
Made in U.S. vintage spec ABR-1 bridge with no retaining wire and plated brass saddles. Hardware sold separately. See P-GKLU-KLP127X for a complete set. The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $35.65
Bridge - ABR-1, Wired, Brass Saddles
Colors Available:
Made in U.S. Vintage spec ABR-1 bridge. Wired. Hardware included. ABR-1 bridge with the retaining wire and saddles plated to match the frame. True to original mounting specs. The saddles are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!
Starting at $37.33
Bridge - ABR-1, Wired, Plated Brass Saddles, USA
Colors Available:
Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with plated brass saddles. Mounting hardware sold separately. The bridge features the vintage-style retaining wire that secures the plated brass saddles and intonation screws onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $32.92
Bridge - ABR-1, Wired, Raw Brass Saddles, USA
Colors Available:
Made in U.S. vintage-spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with raw brass saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP128X. The bridge features the vintage-style retaining wire that secures the raw brass saddles and intonation screws onto the bridge.
  • Post spacing: 2.93 inches (74.5mm)
  • Radius: 12 inches (30.48cm)
  • String Spacing: 10.4 mm
Starting at $32.95
Bridge - Bigsby, bridge assembly for guitar
Colors Available:
Genuine Bigsby® bridge assembly for use with Bigsby vibrato units.
Starting at $55.95
Bridge - Bigsby, for Guild Special Archtop
Colors Available:
Genuine Bigby bridge for Guild Special Archtop guitars. This bridge has a 2-1/16" string spacing with a 3” stud spacing.
$69.95
Bridge - Bigsby, Sorkin / Bowtie Assembly

Genuine Bigsby® Sorkin bridge assembly for use with Bigsby vibrato units. The Sorkin bridge is also known as the bowtie bridge.
2 13/16” stud spacing.

$65.95
Bridge - Fender, American Vintage, for '62 Reissue Strat
Colors Available:
Genuine Fender USA vintage Stratocaster tremolo assembly. Features 'FENDER' stamped saddles
Starting at $119.95
Bridge - Fender®, 3-Saddle, for Vintage Telecaster, Chrome
(Non-serialized) Bridge Plate. Used on American Vintage Series Telecaster® guitars manufactured from 1986 to the present. Mounting hardware included.
The standard version comes with 3 brass vintage Tele® saddles and the Road Worn version features three vintage steel saddles.
Starting at $55.95