Guitar Parts & Pickups

Replacement chrome 4 bolt guitar neck plate. 4 screws included.

Original Fender® vintage-style neck plate for use on most U.S. and Mexico-made Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.

1970s vintage-style neck plate with engraved "F" logo, for use on most Fender guitars and basses using four-screw neck mounting without Micro-Tilt™ adjustment. Mounting screws included.
Features:

• 1970s vintage-style neck plate
• Engraved "F" logo
• Mounting screws included
• For most Fender guitars and basses with four-screw neck mounting and no Micro-Tilt adjustment

Vintage-style three-screw neck plate fits American Vintage and Classic series 1970s guitar models manufactured from 1995-present (also fits most 1970s-era Fender guitars with three-screw neck mounting and Micro-Tilt™).
Features:

• Chrome-plated steel neck plate
• Engraved "F" logo
• Stamped "Fender Micro-Neck Adjust Pat. 3550496"
• No serial number
• Mounting hardware not included
• For American Vintage and Classic series 1970s guitar models (1995-present, also fits most 1970s-era Fender guitars with three-screw neck mounting and Micro-Tilt)

Genuine Fender® made in USA neck plate for American 4 bolt American Standard bass guitars. This neck plate features the Fender® logo along with Corona, California.

Original Fender® neck plate stamped with "Fender® Corona California" and including hole for Micro-Tilt™ neck-tilt adjustment. Fits most Fender guitars using four-screw neck mounting with Micro-Tilt. Mounting hardware included.
Features:

• 4-bolt mount
• Stamped "Fender® Corona, California"
• Mounting screws included
• For most Fender guitars using four-screw neck mounting with Micro-Tilt adjustment

This neck plate features an artistic acanthus flower engraving that adds a custom look to guitars. The Gotoh Luxury-Mode series includes stylized parts made with an ultra fine, high-speed carving technology. These parts are replacements that can enhance the appearance of any guitar. Four mounting screws are included with the neck plate.

A traditional steel neck mounting plate for guitar or bass. Screws included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Dome Knobs - P-GGT-90
• Tele Bridge - P-GGT-85
• String Ferrules - P-GGT-87
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• String Trees - P-GGT-92
• Control Plate - P-GGT-91

Strat style 4 bolt neck plate. (Mounting hardware not included). Four ¼” mounting holes. Made in Korea

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom feel and appearance.

• Measures 45mm x 10mm x 4.95mm
• Sold individually

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.

• Measures 52.5mm x 10mm x 4.95mm
• Sold individually

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.

Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.

• Measures 56 mm x 11 mm x 6.35 mm
• Sold individually

This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.

• Thickness = 9/64 inches (3.47mm)
• Flat Bottom Length = 1 11/16 inches (43 mm)
• Height at ends = 13/64 inches (5.25mm)
• Height at middle = 15/64 inches (6mm)

LSR roller nut reduces friction that can cause tuning instability. Comes with instructions, mounting hardware and Wilkinson® adapter for older Strat® Plus models. Used on American Deluxe HSS guitars. Kit Includes: LSR Nut, Shims, Mounting Screws and Bezel Adapter (for Retrofitting to Wilkinson® Nut Equipped Guitars) Will Accommodate String Gauges from .008 to .056. Some modification may be required.

Original Fender pre-slotted bone nut for Teles and Strats.

Genuine Fender® pre-slotted melamine nut for Telecaster and Stratocaster guitars. This nut has 9 1/2 in. top radius and 7 1/4" bottom radius with an overall length of 1.695 in.

High-quality Micarta (synthetic bone) pre-slotted string nut for use on American Standard Precision Bass and other U.S.- and Mexico-made basses with 9.5"-radius fingerboards.

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.

This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.

• Length = 2 1/64 inches (51.25mm)
• Height = 11/64 inches (4.55mm)
• Thickness = 1/8 inch (3.1mm)

Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 41/64 inches (41.52mm)
• Height #1 (fretboard side) = 13/64 inches (5.06mm)
• Height #2 (headstock side) = 13/64 inches (5mm)
• Thickness at bottom = 9/64 inches (3.46mm)
• Thickness at top = 1/8 inches (3.1mm)

This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 23/32 inches (43.75mm)
• Height #1 (fretboard side) = 5/16 inches (7.81mm)
• Height #2 (headstock side) = 9/32 inches (7mm)
• Thickness at bottom = 15/64 inches (6.1mm)
• Thickness at top = 3/16 inches (4.78mm)