Guitar Parts & Pickups

Genuine Bigsby® narrow, stationary handle for use with Bigsby vibrato units. This 50s style fixed arm is a single piece and does not swivel.

Gold anodized aluminum Telecaster® style pickguard with 5 mounting holes. This pickguard has two pickup mounting holes for use with neck pickups that mount directly to the pickguard. All pickguard mounting holes are countersunk and the pickup mounting holes are flat.

Genuine Fender chrome hard-tail bridge assembly for use on Classic and Pawn Shop series instruments. Includes six stamped saddles, intonation screws and springs, and saddle-height adjustment screws.

• String-through-body design
• Mounting hardware not included
• 2-7/32" String Spacing

Gold anodized aluminum Telecaster style pickguard with 8 mounting holes. This pickguard has two pickup mounting holes for use with neck pickups that mount directly to the pickguard. All pickguard mounting holes are countersunk and the pickup mounting holes are flat.

Vintage style stamped tuning machine set with solid metal oval buttons. These nickel finished tuners look great on vintage and Gibson style guitars. The gear ratio is 15:1. All mounting hardware is included in this three per side tuner set.

Made in U.S. modern-spec tune-o-matic bridge with no retaining wire. This bridge is fully plated and comes with pre-slotted saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP120XC. This Nashville bridge is a great upgrade that features wider intonation adjustments and a larger mass for better tone and sustain.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm
• For use with 4.95mm stud posts

Made in U.S. vintage spec ABR-1 bridge with no retaining wire and nylon saddles. Hardware sold separately. See P-GKLU-KLP1273N for a complete set. The bridge uses string tension along with the set screws to secure the nylon saddles onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Threaded thumbwheel style studs and bushings and features hard zinc saddles. Hardware included.

U.S. made and true to vintage 1950s specifications. This lightweight stop tailpiece is made of aluminum to match the original 1950s version. High quality plating is used on all options. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1141X.

• 3.22 in. (82mm) stud spacing

Original Fender® pickup cover for '51 P Bass/Tele Bass, chrome.
Features:

• Vintage-style chrome bridge cover
• For vintage-style '51 Precision Bass
• Mounting hardware not included

Direct replacement for most Fender P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included.

Sealed diecast tuning machine set with a standard 45° mounting screw and solid metal large Schaller style buttons. This chrome finished configuration looks classic on both electric and acoustic guitars. The gear ratio is 15:1. All mounting hardware is included in this three per side tuner set.

Sealed diecast tuning machine set with a standard 45° mounting screw and solid metal oval buttons. This chrome finished configuration looks classic on both electric and acoustic guitars. The gear ratio is 15:1. All mounting hardware is included in this three per side tuner set.

Genuine Fender® set of six plated steel bridge saddles with offset intonation screws, for use on American and American Standard series guitars manufactured from 1986-2007. Intonation springs and mounting hardware included.
Features:

• Set of six plated steel bridge saddles with offset intonation screws
• Intonation springs and mounting hardware included
• For American and American Standard series guitars (1986-2007)

Vintage style diagonal mount tuning machine set featuring a solid metal Schaller-style knob and are finished in chrome. These stamped tuners feature a classic diamond shaped back cover that can be removed for a more traditional look. The gear ratio is 15:1. All mounting hardware is included in this six in a line tuner set.

The HCP Humbucker Control Pot is a dual mode variable coil tap selector for electric guitars and basses that eliminates the additional switches associated with coil splitting a pair of humbuckers. In TAP mode, rotating the pot counterclockwise fades from humbuckers to outer coils (neck pickup South coil & bridge pickup North coil). Pulling the HCP control up and rotating it counterclockwise fades from humbuckers to inner coils (neck pickup North coil & bridge pickup South coil). Tonal control is expanded with the unique ability to coil tap both humbuckers in varying amounts. In COIL FILTER mode, turning the HCP control applies varying amounts of a specially tuned high frequency filter to only one coil of the selected coils of the humbuckers (either North or South coils can be filtered). This makes each pickup a single coil at high frequencies and a humbucker at lower frequencies which produces a sound similar to a pair of single coils but with a stronger, fuller tone and 50% less noise than coil tapping.

Fits most American and Mexican stratocasters. 3 ply standard 11 hole pickguard. Fits 3 single coil pickukps.

Sealed diecast tuning machine set with dual mounting pins and solid metal oval buttons. These chrome finished tuners are a great choice for Fender® style guitars and others. The gear ratio is 15:1. All mounting hardware is included in this six in a line tuner set.

Genuine Fender replacement chrome bridge assembly for use with most Standard series Telecaster models manufactured from 2004-present (does not retrofit to a three-screw mounting design without modification). Bridge pickup and mounting hardware not included.

• Chrome bridge assembly
• Six adjustable block saddles
• Four-screw mounting design
• Mounting hardware not included
• For Standard Series Telecaster models (2004-present)

Vintage style stamped tuning machine set with vintage green plastic keystone buttons. These classic tuners look great on vintage and Gibson style guitars and come in multiple finish options. The gear ratio is 15:1. All mounting hardware is included in this three per side tuner set.

High quality 42AWG Elektrisola P155 magnet wire with heavy (two coats) enamel. Perfect for winding coils, pickups, or transformers. Properties

• Very good solderability
• High thermal properties

Applications

• Small transformers
• Relays
• Solenoids
• Small motors
• Watch coils
• Transformers
• Instruments

Please note: Product length is based on weight and may vary slightly from the listed values. SKU Weight Approx. Length S-MW-42-2OZ 2 oz. 6200 ft S-MW-42-4OZ 4 oz. 12400 ft S-MW-42-8OZ 8 oz. 24800 ft S-MW-42-1LB 1 lb 49600 ft

Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 1-11/16'' (43mm). Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.

Sealed diecast tuning machine set with a standard 45° mounting screw and solid metal oval buttons. These chrome finished tuners are a great choice for Fender® style guitars and others. The gear ratio is 15:1. All mounting hardware is included in this six in a line tuner set.

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
Tip not included, see W-SC-W0X

Nickel Finish