Guitar Parts & Pickups

Vibramate V5-TE Slotted Bridge Saddle Set for Telecaster Guitars are designed to work with the Vibramate V5-TE Series Mounting kits and Bigsby vibratos. Each set is custom-slotted utilizing the traditional 3-saddle "ash-tray" configuration and are designed to properly align the strings with the guitar neck of a Telecaster Guitar. The vintage style saddles are made in the USA and feature all Stainless Steel mounting screws and compression springs.

Backplate cover for Gibson® Les Paul® electronics cavities. These covers are made of single-ply material with four mounting holes and a foil backing.

Original, made in USA, P.A.F.-correct covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 49.2mm spacing.

Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.

Gotoh 12-String Bridge for Electric Guitar – This Twelve string bridge for Electric Solidbody guitars allows each string to be individually adjusted for intonation. Hardware included.

Nickel pickup cover for building or repairing Filtertron style humbucking pickups.

• Nickel plated brass
• Overall measurements: 71.9mm/2.83” Length x 35.3mm/1.38” Width x 16.2mm/.63” Height
• 63.6mm/2.50” center to center mounting screw holes
• Sold individually

U.S. made bridge posts for Nashville style bridges. These bridge posts are made of solid brass and are finished with a high quality plating. Matching anchors are included. Note: These posts have 4.95mm diameters. Check your bridge for compatibility.

American Series tuners for Fender® guitars, 6-in-a-line, staggered

LSR roller nut reduces friction that can cause tuning instability. Comes with instructions, mounting hardware and Wilkinson® adapter for older Strat® Plus models. Used on American Deluxe HSS guitars. Kit Includes: LSR Nut, Shims, Mounting Screws and Bezel Adapter (for Retrofitting to Wilkinson® Nut Equipped Guitars) Will Accommodate String Gauges from .008 to .056. Some modification may be required.

Vintage style diagonal mount tuning machine set featuring a large solid metal Schaller-style knob and are finished in chrome. These stamped tuners feature a classic diamond shaped back cover that can be removed for a more traditional look. The gear ratio is 15:1. All mounting hardware is included in this three per side tuner set.

Original, made in USA, mounting rings for mini humbucker and Firebird pickups. These premium metal mounting rings offer an elegant upgrade to the standard plastic rings.

The ZipWire™ Kit provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed and the color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors.

Any sore shouldered bassist can tell you that fighting "neck dive" from a poorly balanced instrument is akin to slow torture. Our Ultralite® bass tuning machines are designed and manufactured to lighten up the load while improving ruggedness and accuracy. Spend more time on stage, not at the chiropractor.

The PQ-5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom. It is pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.687 in. (42.85mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.198 in. (5.03mm)
• E to E - 1.363 in. (34.62mm)

For a Tusq XL version of this nut, see P-GNUT-TUSQ-EPS-1XL.

Original Fender® neck plate stamped with "Fender® Corona California" and including hole for Micro-Tilt™ neck-tilt adjustment. Fits most Fender guitars using four-screw neck mounting with Micro-Tilt. Mounting hardware included.
Features:

• 4-bolt mount
• Stamped "Fender® Corona, California"
• Mounting screws included
• For most Fender guitars using four-screw neck mounting with Micro-Tilt adjustment

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.

• Tip not included. See W-SC-W0X (Note: Two threads will show beneath the switch cap.)
• Nickel Finish

Original, made in USA, humbucker frame with universal holes for multiple configurations. This premium baseplate has a 49.2mm spacing and is made of raw nickel silver.

"F" Style tuners as used on 1970s Fender® guitars, 6-in-a-line. Hardware included.

Deluxe locking tuners used on most American Deluxe Strat® models. This staggered set may also be used as an upgrade to most Fender® instruments. Chrome. Set of 6

Sealed diecast tuning machine set with a centered mounting screw and large Schaller style buttons. This chrome finished configuration looks classic on both electric and acoustic guitars. The gear ratio is 15:1. All mounting hardware is included in this three per side tuner set.

The 1204-00 is the perfect option to upgrade the nut on your Fender Precision style Bass guitar. It is pre-slotted making installation quick and simple. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.65 in. (41.91mm)
• Width - 0.125 in. (3.17mm)
• Height - 0.187 in. (4.75mm)
• E to G - 1.25 in. (31.75mm)
• Radius - 7.25 in.

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

Original Fender® Stratocaster tremolo arm (also known as "whammy bar") with tip. Metric M5 threading.

This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 23/32 inches (43.75mm)
• Height #1 (fretboard side) = 5/16 inches (7.81mm)
• Height #2 (headstock side) = 9/32 inches (7mm)
• Thickness at bottom = 15/64 inches (6.1mm)
• Thickness at top = 3/16 inches (4.78mm)