Guitar Parts & Pickups

Designed for use on arched top electric guitars Bigsby B16 Specifications

• Model Name: B-12
• Series: Original Kalamazoo Line
• Manufacturing Method: Sand Cast
• Manufacturing Material: Aluminum
• Approximate weight: 344 grams/12.1 oz.
• Overall Length: 8 3/8" / 212.7 mm
• Overall Width: 3 5/8" / 92.1 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

The Gotoh Relic bass string guide is a convincingly aged part that is perfect for a vintage or relic'd bass. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part.

Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)

Original Fender® vintage bass tuning key bushings. Fits American Vintage, Classic and Road Worn Series, Power Jazz Bass, and Carbonate Series bass guitars.

Sealed diecast tuning machine set with a standard 45° mounting screw and solid metal oval buttons. These chrome finished tuners are a great choice for Fender® style guitars and others. The gear ratio is 15:1. All mounting hardware is included in this six in a line tuner set.

The DMT is a passive dual mode guitar tone control designed specifically for electric guitars that can operate in either HIGH PASS or LOW PASS modes greatly expanding the instruments tonal possibilities without the use of a battery or active electronics. Micro switches on the circuit board provide the user the ability to select one of two different frequency ranges for both high and low pass modes. Easy installation with no capacitors or other parts needed. Replace the tone control in you guitar with one that you will actually use!

Black knob with white line, silver top, set screw and brass insert. Fits ¼" shaft with set screw. These Boss style knobs come in a variety of sizes. See P-K383X for an unskirted version.

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.
Tip not included, see W-SC-W0X

Nickel Finish

Insulated with two coats of enamel. Perfect for winding coils or transformers. 28 gauge, 200 foot. 105°C temperature rating, 600V.

Replacement pickguard for Telecaster guitars. These pickguards feature five mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity.

These compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's "Res-O-Lite" machine heads are extremely light weight, only 40 grams each, and made from aluminum alloy to make for a less heavy necked bass. Superior quality and precision made for even the most demanding players out there! Come in 4 on a side and features a 20:1 Gear Ratio. Mounting hardware included.

The introduction of the new Grover Locking Rotomatics® gives you the ease of use provided by a standard tuner and the positive locking of our internal cam post. Simply insert the string through the string hole, pull to tension by hand and begin tuning. As you start to tune, only the locking cam in the string post turns. Once the string is locked, the string post begins to turn allowing you to bring the string to pitch. In less than one revolution of the string post, you will be in tune, to stay in tune. Gear ratio is 18 to 1.

U.S. made vintage style ABR-1 thumbwheels. These steel thumbwheels feature high quality plating and are tapped for 6-32 threaded posts.

Gibson style speed knob. For 24 teeth knurled shaft.

Go ahead and jump! You're protected by Fender® strap locks

Genuine Bigsby essential small parts pack. This pack comes with a variety of Bigsby parts common to many of their tremolo units. Item Qty BigSby Part Number Handle Stud 1 0495-1980 Handle Spring 1 0495-1960 Handle Nut 1 0495-1410 Hinge Pin 1 0495-1635 Roller Bearing 1 0495-0230 Needle Bearing 2 0495-0237

Vintage-style chrome bridge assembly for use on most Standard, Deluxe, Roadhouse™, Lone Star™, and Blacktop Stratocaster models manufactured from 2006-present. Includes six bent "Fender"-stamped saddles, intonation screws and springs, and saddle-height adjustment screws. Mounting hardware, tremolo claw, tremolo springs and tremolo arm not included.

• 2-1/16" mounting spacing*
• Standard 10/32 tremolo arm threading
• For a variety of Stratocaster models (2006-present)

*Note that 2-1/16" bridge mounting spacing means that bridge-mounting screws will not fit vintage or vintage reissue instrument unless modified to do so.

Original Fender 6-32 screws for use on pickups and switches.

Get better leverage and grip on your whammy bar by replacing the plastic tip, package of two. 10-32 thread size.

The 6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.730 in. (43.94mm)
• Width - 0.243 in. (6.16mm)
• Height - 0.357 in. (9.08mm)
• E to E - 1.344 in. (34.14mm)
• Radius - 15 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-5.

The Gotoh Relic strat® style jack plate is a convincingly aged part that is perfect for a vintage guitar or a relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This plate fits 1/4" jacks. Relic'd mounting screws are included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Tremolo Set - P-GGT-82
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• Neck Plate - P-GGT-89
• String Trees - P-GGT-92

Original Fender® jack plate for Stratocaster. Used on nearly every Stratocaster manufactured from 1954 to present. Includes screws.

The ResoMax 4mm bridge is made from Graphtech’s ResoMax alloy. ResoMax is lightweight, high strength, and full of harmonics that will leave your guitar dripping with tone. It comes preloaded with String Saver saddles to reduce string breakage and improve tuning stability. All ResoMax bridges feature Graphtech’s patented magnetic lock to the steel posts that come with it. 4mm posts are used in a lot of American and European-built guitars, and brands such as Gibson, Godin, and Duesenberg. Please see the measurement guide to verify compatibility. The ResoMax NV2 is loaded with Graphtech’s Patented String Saver Saddles. These saddles are impregnated with PTFE and will dramatically reduce string breakage and improve tuning performance.

Vintage style push back wire. Especially useful for building or repairing single coil pickups. Push-back style eliminates the need for stripping.

• Outer diameter: 0.07"
• Sold by the foot