Guitar Parts & Pickups

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom feel and appearance.

• Measures 45mm x 10mm x 4.95mm
• Sold individually

Fender® truss rod nuts for use on American Vintage and Classic series instruments with heel-mount truss-rod adjustment. This Phillips head vintage-style truss rod nut helps keep electric guitar and bass necks straight and true.

The Graphtech Sleek String Trees are a great option to replace the metal string trees on your Fender-style guitar or any guitar with string trees. Includes two Tusq XL string trees and three mounting screws. The height can be sanded down and an extra short screw is provided. TUSQ XL and Black TUSQ XL nuts are designed to boost guitar tone and performance. These precision-engineered nuts are made with a specially formulated material that couples the strings' vibrations to the neck and brings out the hidden harmonics and richness in every note. It is based on the highly resonant TUSQ man-made ivory but is impregnated with PTFE to improve the tuning performance of the guitar.

Single P-90 pickup with a nickel-plated metal cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating! If you love P-90s and want to forget about not being able to use your favorite guitar because of lighting and power issues you simply have to get into a set of new Stealth 90 pickups. Recommended wiring includes using a 500K Ohm pot for volume, 250K Ohm pot for tone and a .022 capacitor as these are humbucking pickup designs.

The 1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.554 in. (39.47mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.187 in. (4.75mm)
• E to G - 1.223 in. (31.06mm)
• Radius - 7.25 in.

U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.

• 3.22 in. (82mm) stud spacing

Three-ply Precision Bass® style pickguards with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration. The control cavity is backed with foil. All mounting holes are countersunk.

1:15 gear ratio. Hardware included. Relic series tuners are designed to create unique textures reminiscent of those found in vintage equipment.

Set of 6-in-a-line. 1:15 gear ratio. Screws & hardware included.

The Kluson® Revolution G-Mount 19:1 high ratio tuning machines offer the traditional Kluson® footprint and a newly designed sealed die-cast, one-piece housing. High gear ratio guarantees silky smooth operation, fine tuning stability with no backlash. These state of the art tuning machines are designed to directly retrofit die-cast tuning machines that have a hex head (collared) bushing and a traditional Kluson® two-screw mounting pattern. Uses the common modern 25/64 in. (10mm) peghole. The G-Mount pattern makes these a great drop-in replacement for the modern “Gibson® Deluxe” collared tuning machines found on many models. No modification or unused holes!

• All mounting hardware is included.
• Precise 19:1 gear ratio for smooth operation
• Sealed diecast,one piece housing
• Traditional Kluson® two-screw mounting pattern with collared bushing.
• Pearloid button
• Available in Nickel or Gold

The PQL-6011-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made post-2014. It is slightly taller than the P-GNUT-TUSQ-EPS-3XL (pre 2015). When in doubt, use this one, you can always sand the bottom of the nut to adjust lower.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:

• Length - 1.725 in. (43.83mm)
• Width - 0.185 in. (4.69mm)
• Height - 0.405 in. (10.30mm)
• E to E - 1.408 in. (35.77mm)

Nickel pickup cover used when winding your own humbucker sized pickups or for covering previously uncovered pickups to give them that sleek nickel look. These covers are plated and polished to a beautiful shine and feature a vintage style spacing.

• 50mm/1.95” vintage style spacing (outer holes center to center)
• Overall measurements:70mm/2.76” Length x 39.7mm/1.56” Width x 16.8mm/.66” Height

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. PBA pickup uses Alnico 5 rod magnets and a knifeedge gloss-cover hot coil wind that delivers a forceful sound with pushed midrange but tight bass and treble response. This pickup provides the humbucking punch and boom associated with the electric bass.

Distinctive in styling and quality, the Imperial made it's first appearance in the 1970s. The most notable feature of this unique machine head is the futuristic Three Step button, a fresh and funky design trademarked by Grover. This re-introduction of the Imperial is an exact reproduction of the originals, including a 16:1 gear ratio.

The Mid-Size series is made with the same quality as the other Rotomatic® models. Slightly larger than the Mini Rotomatics®, the mid size series features an 18:1 gear ratio for smoother, more precise tuning. This compact machine head is perfect for use on smaller and in-line headpieces.

The Mid-Size series is made with the same quality as the other Rotomatic® models. Slightly larger than the Mini Rotomatics®, the mid size series features an 18:1 gear ratio for smoother, more precise tuning. This compact machine head is perfect for use on smaller and in-line headpieces.

Two piece rosewood bridge with metal saddle. Adjustable style. 6” wide. For 6 or 12-string guitars with a tailpiece.

Original Fender® Tremolo arm for Vintage '62 Jaguar/Jazzmaster.
Features:

• Chrome tremolo arm
• Arm tip not included
• For American Vintage series Jaguar and Jazzmaster models (1998-present)

Sealed diecast tuning machine set with a standard 45° mounting screw and solid metal oval buttons. These chrome finished tuners are a great choice for Fender® style guitars and others. The gear ratio is 15:1. All mounting hardware is included in this six in a line tuner set.

The HB-Classic α is a vintage-style humbucker pickup. This pickup uses a made in USA Alnico 2 bar magnet for a smooth vintage tone. This pickup is wax-potted for sonic stability and uses a shielded 4-conductor wire for various wiring options. The HB-Classicα humbucker comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

Three-ply black/white/black Stratocaster style back plate with 6 mounting holes.

A newly fashioned design from Gotoh® with almost no internal friction. Designed to directly retrofit the mounting hole pattern of a vintage tremolo. You can use this bridge to replace a conventional, Hardware included.

High quality SD91 tuners from Gotoh with brass posts and internal washers. Brass posts were used by Gibson® until 1975 and by Fender® until 1966. Unlike the common steel components, brass string posts and internal washers improve vibration transmission, resulting in a sound that is similar to the original vintage tuning machines. This 6-in-line oval button tuner set includes all bushings and mounting screws.

The PT-5042-00 is a great option to upgrade the nut on your Fender style electric guitar (or a guitar with similar specs). It is pre-slotted for a quick and simple install. It is 3/16" tall so make sure that is enough height for your guitar. Dimensions:

• Length - 1.652 in. (41.98mm)
• Width - 0.126 in. (3.22mm)
• Height - 0.196 in. (4.98mm)
• E to E - 1.388 in. (35.25mm)
• Radius - 12 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-6. For a similar nut that works on curved and flat Fender style necks, see P-GNUT-TUSQ-EPS-1XL-X.