Guitar Parts & Pickups

Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired. Hardware included.
The bridge features the vintage-style retaining wire that secures the brass saddles and intonation screws onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.

Nickel pickup cover used when winding your own humbucker sized pickups or for covering previously uncovered pickups to give them that sleek nickel look. These covers are plated and polished to a beautiful shine and feature a vintage style spacing.

• 50mm/1.95” vintage style spacing (outer holes center to center)
• Overall measurements:70mm/2.76” Length x 39.7mm/1.56” Width x 16.8mm/.66” Height

Two piece rosewood bridge with metal saddle. Adjustable style. 6” wide. For 6 or 12-string guitars with a tailpiece.

The PQ-9200-C0 is a great option to replace or upgrade the saddle on your Taylor acoustic as well as many other popular guitars. It is compensated to help improve the playability of your guitar.
Dimensions:

• Length - 2.8 in. (71.12mm)
• Width - 0.22 in. (3.1mm)
• Height - 0.392 in. (9.99mm)

Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 41/64 inches (41.52mm)
• Height #1 (fretboard side) = 13/64 inches (5.06mm)
• Height #2 (headstock side) = 13/64 inches (5mm)
• Thickness at bottom = 9/64 inches (3.46mm)
• Thickness at top = 1/8 inches (3.1mm)

Vibramate V7-335 installs in minutes with no drilling! For arch top guitars with stop tailpiece and Tune-A-Matic bridge. The E-series is for 8.0" guitars. The G-Series is for 8.5" guitars.

Blank thin pickguard material sheets with adhesive backing for acoustic guitars. The pre-applied adhesive makes for a simple installation once cut. All colors feature a gloss surface.

Original, made in USA, covers for 1950s, vintage-style, tele neck pickups. These premium tele covers are made of nickel silver and feature the long skirt associated with ‘50s era pickups.

Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:

• 3-ply / 2.5mm thickness
• 8 mounting holes
• Shielding over electronics cavity
• Fits 3/8" bushing pots

Genuine Bigsby® Duane Eddy handle assembly. This unit attaches to vibratos using the included set screw.

Designed for use on arch top electric guitars. Original Kalamazoo Line.

SGS is the smaller model of SG510 series and use a 18:1 gear ratio. The SG510 series has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing—they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. Mounting hardware included.

These guitar machines are a triumph in engineering and styling. The housing provides a maximum bearing for worm, gear and string post. Gear ratio is 14:1. Worm and gear are precision-cut for perfect meshing. This eliminates backlash and slippage. Countersunk tension screw permits player to regulate turning tension to any degree. Gear box has a special lubricant for lifetime, trouble-free service. Includes 5/8” washers, bushings and wood screws.

Genuine Fender® set of six plated steel bridge saddles with offset intonation screws, for use on American and American Standard series guitars manufactured from 1986-2007. Intonation springs and mounting hardware included.
Features:

• Set of six plated steel bridge saddles with offset intonation screws
• Intonation springs and mounting hardware included
• For American and American Standard series guitars (1986-2007)

Original Fender® jack cup for Tele, nickel, includes mounting hardware. For use on nearly all U.S. and Mexico-made Telecaster guitars manufactured from 1952-present

Original Fender® pickguard hum shield for 1962 Stratocasters.
No wiring necessary. Genuine Fender® thin aluminum shielding for the underside of your Stratocaster® pickguard helps with noise-cancellation.
.011" thick aluminum shielding.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 24 gauge, 200 foot. 105°C temperature rating, 600V.

Original, made in USA, 10-hole keeper bar for 49.2mm spacing. This P.A.F. correct keeper bar is great for humbucker and P-90 pickups. Made of raw steel.

Genuine Bigsby® compensated bridge with a 2 13/16” stud spacing. This polished bridge has pre-slotted saddles and is compensated for a plain G string. This bridge was used on Gretsch 6120W models. Please check stud spacing for compatibility.

The SGV510 series are recognized the world over as one of the top performing super tuners on the market. These feature an 18:1 gear ratio. They have evolved through improvement without any compromises along the way. The come equipped with a considerable amount of high-technology as a standard. With the improvement of precision fitting gears which give a marvelous touch on playing they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These are three-on-a-side. Mounting hardware included.

Grover style machine heads with threaded bushings for 10mm (13/32") diameter peg holes. Superior professional grade quality and precision made for those who demand nothing but the best for their guitars without breaking the bank. Featuring an 18:1 Gear Ratio and Gotoh's "Rock-Solid" technology so you dont have to worry about a post being misangled causing unproper tension on the strings. Hardware Included

Direct Drop-in compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's Res-O-Lite machine heads are extremely light weight (59.2 grams each) from aluminum alloy to make for a less neck heavy bass. Features a 26:1 Gear Ratio. 4 In Line config, fits many Standard American and Mexican basses. Also the key post can be removed and replaced on opposing side. Come in 4 on a side. Mounting hardware included. Super lightweight bass machine heads. Bass guitars have weighty machine heads and by their very nature have always suffered from “neck-dive”. With the advent of 5 and 6 string basses, this tendency became still more acute, making long sessions uncomfortable for the musician. The RES-O-LITE series was developed to solve this problem. By chiefly using the special alloy “duralumin”, excellent weight savings are achieved.

This pickguard mounting bracket is a direct replacement for contemporary Gibson® Les Paul® guitars. It is USA made component with high quality plating to the standards you would expect for your guitar. Slight differences include the adjustment slot having rounded ends instead of the original square cut slot and a slight difference in width from the historic version. Mounting hardware is not included.

The PQ-M644-00 is the perfect option to replace and upgrade the nut on your Martin style acoustic guitar. It has an angled bottom and comes pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.745 in. (44.32mm)
• Width - 0.224 in. (5.69mm)
• Height - 0.361 in. (9.17mm)
• E to E - 1.418 in. (36.02mm)