Guitar Parts & Pickups

The Graph Tech PQL-5072-00 is a perfect option for Fender guitars or re-issues from the 1950's-60's or 70's. This nut features a 7.25" radius, works with a curved or flat bottom and is permanently lubricated for great tuning stability. It works in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom. It is pre-slotted to make for a quick and easy install on just about all Fender electric guitars made in the 1950’s, 60’ and 70’s. The 7.25” fingerboard radius originated in the early 1950s and was used for most Fender electric instruments until the 1980s. In the 80's it was changed to a slightly flatter 9.5" radius. TUSQ XL is designed to boost guitar tone and performance. This precision engineered nut is made with a specially formulated material which couples the strings' vibrations to the neck and brings out the hidden harmonics and richness in every note.

Vintage-style three-screw neck plate fits American Vintage and Classic series 1970s guitar models manufactured from 1995-present (also fits most 1970s-era Fender guitars with three-screw neck mounting and Micro-Tilt™).
Features:

• Chrome-plated steel neck plate
• Engraved "F" logo
• Stamped "Fender Micro-Neck Adjust Pat. 3550496"
• No serial number
• Mounting hardware not included
• For American Vintage and Classic series 1970s guitar models (1995-present, also fits most 1970s-era Fender guitars with three-screw neck mounting and Micro-Tilt)

Sealed rear-lock diecast tuning machine set with a standard 45° mounting screw and solid metal oval buttons. This chrome finished configuration looks classic on both electric and acoustic guitars. The gear ratio is 19:1. All mounting hardware is included in this three per side tuner set.

Original Fender® pickguard hum shield for 1962 Stratocasters.
No wiring necessary. Genuine Fender® thin aluminum shielding for the underside of your Stratocaster® pickguard helps with noise-cancellation.
.011" thick aluminum shielding.

Original Fender® pickguard replacement, 3-ply, for American Precision Bass. This pickguard fits American, American Standard, American Vintage, Standard and Deluxe series Precision Bass models (does not fit five-string Precision models).

The ST-Classic is an amazing homage to the 1960’s strat pickup. With staggered Alnico 5 rod magnets, vulcanized fiberboard flatwork, and enamel coated wire, the ST-Classic offers a truly vintage sound. These pickups are wax potted for sonic stability, feature a bevel on the magnets, and use cloth pushback wire for an easy and clean install. A cover, mounting screws and springs are included. Made in Japan.

Insulated with two coats of enamel. Perfect for winding coils or transformers. 40 gauge, 750 foot spool. 105°C temperature rating, 600V.

Genuine Bigsby® replacement flat handle with pre-installed stud. This 9.5" flat handle is longer than the stock handle used on most Kalamazoo Series vibratos.

Genuine Bigsby mounting screws pack. This pack comes with a variety of Bigsby screws common to many of their tremolo units. Item Qty BigSby Part Number Body Mount Screws 4 0495-1927 Hinge Mount Screws 4 0495-1923 Handle Bracket Set Scre 2 0495-1931

Brass saddle version of the EV510T series tremolo bridge featuring Gotoh’s patented stud lock system and FST block. Gotoh 510T Series Tremolos are machined with Chrome Molybdenum Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Studs, anchors, claw with screws, springs, arm, and hex keys for adjustments are all included with this tremolo. Gotoh's original FST feature (PAT.) is located between the saddle and ball end. The large channel keeps the strings from touching the plate. This feature improves the tremoloʼs ability to return to the tuned position after using the tremolo arm.

Genuine Gotoh spring claw with five spring hooks. Mounting screws included.

High quality SD90 tuners from Gotoh with brass posts and internal washers. Brass posts were used by Gibson® until 1975 and by Fender® until 1966. Unlike the common steel components, brass string posts and internal washers improve vibration transmission, resulting in a sound that is similar to the original vintage tuning machines. This 3-per-side keystone button tuner set includes all bushings and mounting screws.

These super tuners are recognized as such around the world. The SG381 feature a 16:1 gear ratio and has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing---they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These come with a metal keystone head and are perfect for your three-on-a-side setup. Mounting hardware included.

Gotoh chrome locking tuner. Great upgrade or replacement for many stock tuners.

• #5 button
• Chrome finish
• 16:1 gear ratio
• 3+3 orientation

Gotoh's unique grooving on the “In-Tune” saddles results in more exact intonation compared to traditional vintage-style saddles. Each saddle is reversible and can be used in any position. Titanium construction is used for rich harmonic overtones and long sustain. The brass saddles create a bright sound. 10.8mm string spacing

Replacement bushings for Gibson® headstocks with 8.85mm outside diameter and 6.35mm inside diameter These Kluson® replacement push-in bushings are designed to appear like current Gibson® production with the more rounded flange. Same mounting specs as the bushings that accompany the current Kluson® production tuning machines so they will easily replace similar bushings with the same spec requirements

The PQ-4187-00 is a 3/16" thick block or slab of pure TUSQ. It can be used to make a nut, small saddle or just about anything you can imagine.
Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.187 in. (4.75mm)
• Height - 0.437 in. (11.1mm)
  

Mechanically engineered to the most precise standards of excellence, with the classic look of vintage styling, Grover Deluxe machine heads are a timeless achievement for guitar tuning. Worm and gear are cut to mesh perfectly, thereby eliminating backlash and slippage. The housings are self-lubricating for a lifetime of trouble-free service.

Genuine Fender® tuning key bushings. Made for Fender® and used on a variety of vintage and contemporary models. Press-in bushings for vintage-style tuning keys.

Dunlop®, 6130,.036" x.106", 28% nickel/silver, hard alloy, 2 5/8" long, large/jumbo size, good on early Gibson®, 24 pieces

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.

The HB-Classic is a vintage style humbucker pickup. It uses a made in USA Alnico 4 bar magnet which offers a uniquely balanced tone for an alnico magnet. This pickup is wax potted for sonic stability and uses a shielded 4 conductor wire for various wiring options. The HB-Classic comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.

The HCP Humbucker Control Pot is a dual mode variable coil tap selector for electric guitars and basses that eliminates the additional switches associated with coil splitting a pair of humbuckers. In TAP mode, rotating the pot counterclockwise fades from humbuckers to outer coils (neck pickup South coil & bridge pickup North coil). Pulling the HCP control up and rotating it counterclockwise fades from humbuckers to inner coils (neck pickup North coil & bridge pickup South coil). Tonal control is expanded with the unique ability to coil tap both humbuckers in varying amounts. In COIL FILTER mode, turning the HCP control applies varying amounts of a specially tuned high frequency filter to only one coil of the selected coils of the humbuckers (either North or South coils can be filtered). This makes each pickup a single coil at high frequencies and a humbucker at lower frequencies which produces a sound similar to a pair of single coils but with a stronger, fuller tone and 50% less noise than coil tapping.

Genuine Bigsby® Sorkin bridge assembly for use with Bigsby vibrato units. The Sorkin bridge is also known as the bowtie bridge.
2 13/16” stud spacing.