You are here

Guitar Parts

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
P-GKLU-KLP120XCBridge - Kluson, Nashville Tune-O-Matic, Zinc
Colors Available:

Made in U.S. Modern spec tune-o-matic bridge. No retaining wire. Plated, preslotted saddles. Hardware included Kluson is back in the hardware game with this new USA made Nashville-style Tune-O-Matic bridge. This is an awesome OEM bridge for builders or the DIY repairman offering a longer adjustment area and more mass than the original ABR-1 bridge. It matches Gibson specifications and is a drop-in, non-modification required replacement part. We dare you to compare, you'll never go back!


Starting at $22.50
Click to read more
P-GKLU-KLP128XBridge - Kluson, ABR-1, Wired, Raw Brass Saddles
Colors Available:

Made in U.S. Vintage spec ABR-1 bridge. Wired. Hardware included. This is the Kluson ABR-1 bridge with the retaining wire and raw brass saddles for great tone transfer. True to original mounting specs. The saddles are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!


Starting at $22.75
Click to read more
P-GKLU-KLP1141XTailpiece - Kluson, Lightweight Aluminum, Steel Studs
Colors Available:

U.S. made state of the art stoptail. Available in zinc, aluminum, bell brass and steel. A five step plating process for unmatched quality. True vintage shape and specs, not a reproduction of an aftermarket product that so many try to achieve. Steel studs included. Introducing the new Kluson® vintage aluminum stop-bar tailpiece! Designed for your instrument requiring a stop-bar tailpiece to accompany a separately mounted bridge. This is a super high-quality tailpiece that is very hard to distinguish from the originals of the 50s and 60s and best of all ... it’s made in America! The plating process is a 5 step process which is every bit as comparable to what you would find on blue ribbon winning show cars and made from high grade aluminum. This gives you the same added string definition and note articulation the vintage guys crave and was also used by some of the greatest usa guitar manufacturers from the golden era of guitar building!


Starting at $19.95
Click to read more
P-GKLU-KLP1131XTailpiece - Kluson, Standard Zinc, Steel Studs
Colors Available:

U.S. made state of the art stoptail. Available in zinc, aluminum, bell brass and steel. A five step plating process for unmatched quality. True vintage shape and specs, not a reproduction of an aftermarket product that so many try to achieve. Steel studs included. Introducing the new Kluson® vintage stop-bar tailpiece! Designed for your instrument requiring a stop-bar tailpiece to accompany a separately mounted bridge. This is a super high-quality tailpiece that is very hard to distinguish from the originals used and best of all ... it’s made in America! The zinc used helps maintain a warm, vintage tone without sacrificing string definition and clarity. The plating process is a 5 step process which is every bit as comparable to what you would find on blue ribbon winning show cars. this tailpiece is the most common material and is used by some of the greatest usa guitar manufacturers from the golden era of guitar building on many current standard models.


Starting at $17.50
Click to read more
P-GKLU-SD90SLN-MTuner - Kluson, Nickel, Metal Keystone Buttons, 3/side
Complete set with both bass and treble side individual tuning machines. Includes bushings and mounting screws. Historically correct replacement for many ‘50s and ‘60s Gibson®, Martin® and Epiphone® guitars.
$53.95
Click to read more
P-GKLU-KCD3801XMachine Head - Kluson, 3+3, Contemporary Diecast
Colors Available:

3 per side. New Kluson® 19:1 ratio die-cast tuning machine set for contemporary guitars. These state of the art diecast tuners are designed for usage on contemporary guitars and utilize the same mounting hole common to Grover 305 series medium tuners as well as the common Gotoh tuner with the mounting screw located offset at approximately 7 O'clock or 5 O'clock depending on left or right handed application. Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. All mounting hardware is included.


Starting at $40.95
Click to read more
P-GKLU-KL3801XMachine Head - Kluson, 3+3, Locking, Large Metal Button
Colors Available:

3 per side. The Kluson Contemporary Series 19:1 ratio locking tuning machine uses the more desirable rear knob locking system and is designed for usage on contemporary guitars. This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side). Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. This is a 3 + 3 set of tuning machines with all mounting hardware included.


Starting at $58.95
Click to read more
P-GKLU-KLP127XBridge - Kluson, ABR-1, Nonwired, Brass Saddles
Colors Available:

Made in U.S. Vintage spec ABR-1 bridge. Non-wired. Hardware included. True to specs like the original with no retaining wire. The saddles are held in place with a combination of string tension and the intonation screw end fitting into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!


Starting at $42.95
Click to read more
P-GKLU-KLP128X2Bridge - Kluson, ABR-1, Wired, Brass Saddles
Colors Available:

Made in U.S. Vintage spec ABR-1 bridge. Wired. Hardware included. This is the Kluson ABR-1 bridge with the retaining wire and saddles plated to match the frame. True to original mounting specs. The saddles are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!


$38.95
Out of Stock
Click to read more
P-GKLU-KLP1115XTailpiece Studs - Kluson, Pk/2, Steel, .938 in
Colors Available:
U.S. made quality .938 in. (long) stoptail studs in standard threading. Five step plating process for extra durability. Set of 2.
This Kluson® long stop bar tailpiece stud is made in steel for added strength and sustain. It is intended to be used with longer anchor bushings. Sold separately from inserts.
$8.35
On Backorder
Click to read more
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Guitar Parts