You are here

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
P-GTNN06Nut - Graphite, for Fender, blank unslotted

This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.



  • Length = 2 1/64 inches (51.25mm)
  • Height = 11/64 inches (4.55mm)
  • Thickness = 1/8 inch (3.1mm)

$4.55
$4.10
You save: 10%
Click to read more
P-GTNN06-SLOTNut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
$4.10
You save: 10%
Click to read more
P-GTNN10Nut - Plastic construction, for Stratocaster

Stratocaster guitar nut - plastic construction


$1.95
$1.76
You save: 10%
Click to read more
P-GTS-KIT-2Guitar Screw Kit - Vintage, Shop in a Box
Package of 595

A must for anyone out there with Pre-CBS Fender® guitars and basses. Look no further. You can finally replace those old rusty, stripped out screws with correct new ones that look and are just like the originals. We went to special efforts to have these rare and unusual screws made for use specially, so you can keep that vintage Fender® in primo condition. This assortment contains 595 pieces and comes with a traditional, free, pre-labeled cabinet for easy access and reordering. This Kit contains:



  • 100 Bass/Tele saddle height nickel screws
  • 150 Long Strat saddle height nickel screws
  • 75 Vintage Bass nickel intonation screws
  • 75 Short Strat saddle height nickel screws
  • 120 Vintage tremelo intonation nickel screws
  • 75 Vintage Tele intonation nickel screws

$85.75
$77.18
You save: 10%
Click to read more
P-GTS-KIT-3Guitar Screw Kit - Vintage Slot Head, Shop in a Box
Package of 750

This is the perfect screw assortment for those vintage applications requiring slot head screws. The additional discount purchasing as a kit makes it an unbeatable value.


$117.00
$105.30
You save: 10%
Click to read more
P-GTSJP-XJack Plate - replacement for Stratocaster
Colors Available:
New!:

Replacement jack plate for Stratocasters


$4.55
Starting at $4.10
You save: 10%
Click to read more
P-GTSPRN-XTremolo springs - Replacement for Fender Style Tremolos

Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.


$1.15
Starting at $1.03
You save: 10%
Click to read more
P-GTTJP-CJack Plate - for Telecaster, Chrome

Replacement jack plate for Telecasters


$5.10
$4.59
You save: 10%
Click to read more
P-H166Jack Plate - Electrosocket, for Tele, Anodized Aluminum

This modern cupstyle Tele® jackplate is milled from brass and has an shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!


$10.75
$9.68
You save: 10%
Click to read more
P-H702XControl Plate - Telecaster Style, for ⅜” Bushing Pots
Colors Available:
New!:
Tele style control plate. 5.9” plate mounting center distance (0.123” diameter, recessed).

  • Two potentiometer mounting holes for 3/8” bushing diameters
  • One standard selector switch mounting slot (1.63” mounting center distance, 0.15” diameter, recessed)
  • Made in Korea
$5.35
Starting at $4.81
You save: 10%
Click to read more
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Guitar Parts & Pickups