Guitar Parts & Pickups

The Gotoh Relic tele control plate is a convincingly aged part that is perfect for a vintage guitar or a relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This plate fits 3/8" bushing pots such as the CTS R-VC-MA or Alpha R-V38-XA and is compatible with standard selector switches. Relic'd mounting screws are included. For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Dome Knobs - P-GGT-90
• Tele Bridge - P-GGT-85
• String Ferrules - P-GGT-87
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• Neck Plate - P-GGT-89
• String Trees - P-GGT-92

Clip nut for 8/32" thread. For use with machine screws

ResoMax NV tailpiece is made from Graphtech’s lightweight, high-strength Resomax material that will increase harmonic content and leave your guitar dripping with tone. This is a great option to upgrade or replace the existing tailpiece on any electric guitar that currently has a standard tune-o-matic bridge and tailpiece combo. Equipped with AutoLock, this tailpiece magnetically locks the bridge to the body of the guitar without a tool making restringing a breeze. Graphtech’s Resomax tailpieces ship with metric posts and bushings. Please see the measurement guide to verify compatibility.

The Kluson® Revolution G-Mount 19:1 high ratio tuning machines offer the traditional Kluson® footprint and a newly designed sealed die-cast, one-piece housing. High gear ratio guarantees silky smooth operation, fine tuning stability with no backlash. These state of the art tuning machines are designed to directly retrofit die-cast tuning machines that have a hex head (collared) bushing and a traditional Kluson® two-screw mounting pattern. Uses the common modern 25/64 in. (10mm) peghole. The G-Mount pattern makes these a great drop-in replacement for the modern “Gibson® Deluxe” collared tuning machines found on many models. No modification or unused holes!

• All mounting hardware is included.
• Precise 19:1 gear ratio for smooth operation
• Sealed diecast,one piece housing
• Traditional Kluson® two-screw mounting pattern with collared bushing.
• Pearloid button
• Available in Nickel or Gold

Vibramate Standard V5 Adapter Mounting Kit, For Bigsby B5, Aluminum Now you can install a Bigsby Vibrato on your guitar without drilling any holes!

Original, made in USA, 3-48 x 1” machine screws. These premium screws are perfect for mounting humbucker pickups that need a shorter screw.

SGS is the smaller model of SG510 series and use a 18:1 gear ratio. The SGS510 series has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing—they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. Mounting hardware included.

Any sore shouldered bassist can tell you that fighting "neck dive" from a poorly balanced instrument is akin to slow torture. Our Ultralite® bass tuning machines are designed and manufactured to lighten up the load while improving ruggedness and accuracy. Spend more time on the bass-not at the chiropractor.

Gotoh’s JCB-2 jackplate is a curved football style plate for guitars and basses with edge mounted jacks. This high quality jack plate comes with two matching screws.

Set of three compensated brass bridge saddles for use on vintage-style three-saddle Telecaster bridges (does not fit standard six-saddle Telecaster bridges).
Set includes saddles, intonation springs, slotted intonation screws and saddle-height adjustment screws.
Features:

• Set of three compensated brass bridge saddles
• For vintage-style three-saddle Telecaster bridge assemblies

Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 41/64 inches (41.52mm)
• Height #1 (fretboard side) = 13/64 inches (5.06mm)
• Height #2 (headstock side) = 13/64 inches (5mm)
• Thickness at bottom = 9/64 inches (3.46mm)
• Thickness at top = 1/8 inches (3.1mm)

Gold anodized aluminum P-Bass style pickguard with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration. All mounting holes are countersunk.

Replacement chrome tailpiece for Les Paul style guitars and others. M8 * 12.5 thread studs (anchor bushings included). Made in Korea.

Made with the same materials and specifications of an early 1950s Telecaster pickup, the Original Vintage Telecaster speaks with extremely accurate vintage Tele twang. Made with AlNiCo 3 magnets, enamel coated magnet wire these pickups duplicate the warmth and edge that you'd come to expect from Fender®.

This is a complete set that includes an original Bigsby B5 and a matching Vibramate V5 for use with most traditional style guitars that have a tune-o-matic style bridge and a stop-tailpiece.

Genuine Bigsby® compensated bridge with a 2 13/16” stud spacing. This polished bridge has pre-slotted saddles and is compensated for a plain G string. This bridge was used on Gretsch 6120W models. Please check stud spacing for compatibility.

Genuine Dunlop / MXR large aluminum knob for use with T18 knurled pot shafts. This rugged aluminum knob features a white indicator line and a diamond cut knurl for grip when using it. This high end knob looks great on pedals, amplifiers, and other projects.

At first blush, the KickAss™ might seem like a simple, heartfelt tribute to Leo Quan’s BadAss II®. A closer look, however, reveals significant improvements under the hood that put this bridge in a class of its own. Hipshot worked hard to ensure that the KickAss™ possesses the soul of the beloved original without being a knockoff.

Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.

Double ring. Replacement color-correct Keystone (tulip) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-SLN for single ring.

Designed for use on thin hollow body and semi-hollowbody guitars Bigsby B50 Specifications

• Model Name: B-50
• Series: Licensed Line
• Manufacturing Method: Die Cast
• Manufacturing Material: Aluminum
• Approximate weight: 290 grams/10.2 oz.
• Overall Length: 4 5/16" / 109.5 mm
• Overall Width: 3 13/16" /96.8 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

This neck plate features an artistic acanthus flower engraving that adds a custom look to guitars. The Gotoh Luxury-Mode series includes stylized parts made with an ultra fine, high-speed carving technology. These parts are replacements that can enhance the appearance of any guitar. Four mounting screws are included with the neck plate.

High quality Marshall style knobs with set screws. These knobs are available with the classic gold and silver top caps as well as an all black version. These knobs use a slotted set screw and fit 1/4 in. (6.35mm) pot shafts. 0.77" diameter x 0.62" tall.